Code 50, Firmware was up to date.
I used the amp while practicing for an hour or so with no issues other than Bluetooth connectivity.
However, when I used the amp at band rehearsal, the volume fluctuated and diminished to where I could not thear the amp at all.

Hi,

when I use the playback function the music selected doesn't play within the app.  The music on my iPhone 6 is on Apple Music and I even tried downloading it onto the phone but that still didn't work.  I wasn't sure if I was missing something.....  Thanks for any help!

Mike

Hi all, can anyone here recommend a mic suitable to hang in front of a Code 50? The band I play in predominantly performs at wedding receptions, playing pop/rock, top 40, retro, rock n' roll, etc (nothing heavy). Cheers... 

My headphone jack doesn't seem to be working when I play music through my computer. It sounds fine when I'm playing the guitar and listining through the phones but when I listen to music one side of the stero spectrum sounds low and distant. The phones are new and I know they work. Could this be a software problem or should I send the Code 50 back and get a replacement. The amp is brand new.

Hi.

My JVM 410C have problem whit the reverb on the cleaner canel,I turn it all the way down,but it's still there.

When I turn the amp off,and on again, it's ok,play som minus and the problem is back.

What can be wrong,how to fix /repair it?

The problem started when i hadde used the TC Nova System for a weekend play ingen, I used it in the effect loop,and i also used som reverb from Nova System.

Thanks for replay

Greatings from Norway

I have my Code 25 connected to my Mac via USB.  When I use the Code as an audio out, the stereo signal is not correct:  the signal is principally the left side of the audio output with a little bit of the right side mixed in.

When listening via normal headsets, and then switching to the Code output, the difference is very noticable.  Almost a mono signal.

Will you be creating a gateway program for a desktop pc. Don't have a smart phone.

my output mute button doesn't completely mute the speakers; it cuts the volume low but still sending a signal to the speakers. is this a simple circuitry problem? or has anyone experienced this?

Is marshall 2555x are manufactured handwired 

I bought a Code 50 today and I'm very pleased with it apart from one thing – I downloaded the Gateway app (1.2.7) for my iPhone 6 running the latest version of iOS (9.3.3) and no matter what I try, I can't get the app to connect to the amp. The amp is set up in bluetooth pairing mode, I've hit the "scan for amps button" on the app so many times my finger is about to fall off! I've restarted the phone numerous times, restarted the amp, you name it. It won't find it. Any advice appreciated!

what type of foot controllers work with the MG250

Do we need drivers when recording USB ?

First time to ! I use Cubase 8.5 

Thank !!!

How can I transfer my presets from a Code 25 to another Code 25?

How would I start a warranty return

I'm expecting my Mini Silver Jubilee head to arrive tomorrow. I have two 1x12 cabs I want to use at the same time. One is a 8ohm Mesa Boogie. The other is a 16 ohm Orange cab. My question is; is it possible to use both cabs at the same time? I'm looking at the manual and I'm not so sure. Plug the Orange into the 16 ohm output and The Boogie into a 8 ohm output? Or would that be too much of a load? Thanks.

Would you be able to check if my amp registration went through correctly? Code 50. Wouldn't want to miss out on the extended warranty.

Hi, I'd ke to use an external speaker with my Code 25.

Is it possible to use a 8 Ohm external speaker without any trouble ?

Thanks for your answer.

Hi, I've just bought a DSL5C combo that sounds fabulous.

Just to know when I will have to make tubes replacement, can you tell me:

• - if the 12bh7 power tube needs a bias adjustment when replaced ?
• - if the ECC83 preamp tubes need to be balanced ones or not ?

Thanks

I just wanted to ask why the amp head is in standby mode when the switch is in the off position, rather than the on?  Rather confusing, and seems others have run into this as well but with no real answer. Or is something wired wrong on some heads?  Full playing power comes up with  the standby switch set to on, which seems backwards, so I'm asking what the reason is for this.  Thanks!

just got the amp home

spent an hour trying to connect to an iphone 6s...it will not connect

what is the fault...it appears I am not the only one struggling to connect an iphone