Why does my phone keep asking for a paring pin ever five to ten minutes to connect to my Marshall code 25 and keep disconnecting from my phone i have a Google Pixel 7a 

Hola. Tengo dos parlantes marshall de la serie homeline iii aun sigo esperando que Marshall envie el firmware con la opción de acople entre parlantes Le audio broadcast "Auracast" como lo prometio. Alguien sabe cuando la enviaran o la razón por la cual no la envían , JBL en su última serie de parlantes incluyo el acople Auracast sin problema.

Just found out Kilburn is being scrapped at the end of the year - so that means there will not be a Kilburn 3 - see this post here:

reddit.com/r/Bluetooth_Speakers/s/eezEtlnT70

Why are you doing this?

Hi All,

I'd like to know when was the TSL line retired, Yesterday I got a TSL100 made in Late October 2010 according to the Serial number.

M-2010-43-0003-1 this tells me year 2010, week 43 (last week of october), 0003 unit number, is this unit number for the TSL? My TSL seems to be one of the last ones made, I guess.

because it is funny is that My JVM410 Serial number is M-2010-33-0619-1 this tells me year 2010, week 33 (second last week of august), 0619 unit number which is higher, would this be only for the JVM?

Cheers,

Andrés

The effects loop on my Origin 20 head is not working and I can't figure out why. Any suggestions? The footswitch is plugged in and the boost switch works but no pedals work in the loop. All cables and pedals tried are in working order as I tried them with another amps effects loop and it worked fine.

Hi,

When I turn off my guitar volume I can hear the normal hiss of the Ultra Gain channel but there is another sound which is like an helicopter sound on my DSL20HR. I owned a DSL1HR and it's perfect. The hiss on the Ultra Gain channel is normal without this helicopter sound.

Any issues like this anyone ? Any suggestions to get rid of this issue ? 

Thank you so much !

André

I wish I could upload an audio clip but seems like the options are not available here...

How do I remove presets from MG15FX

Where is the serial # on the Emberton II? 

I have tried them all to no avail on the warranty registration page.

How do I delete a single preset from my library that I don't want

OK so I recently purchased a Digitech DROP pedal so I can drop tune without having to switch guitars while playing in rehearsal. I knew there wasn't a lot of info on pedals with the CODE so I bit the bullet and bought the pedal. It seems to work just fine drop tuning, and the octave feature sounds great. But I notice a bit of double-tracking on the G string or when you try to do bends- in other words, I am hearing the true note int eh background along with the drop tuned note. It tends to be distracting a bit, but it's liveable. I have the guitar going directly into the pedal and then a short cable from the pedal out into the line in on the amp. I don't know if this is a pedal issue or the fact I am using an edited bank with presets and processing the signal PRE input as opposed to an effects loop. I know I could probably try a dry signal preset and eliminate it, but I have no fuzz pedal to use in conjunction with it...O'm hoping I don't need to buy a dedicated pedalboard AGAIN and feed the pedals through to a dry amp preset in order to elimiante issues...especially if I have to play live. That's kind of why I went to the CODE 50 to begin with. Anyone have any input on this topic? It seems a bit lacking in teh community...

UPDATE:

Never mind- found out it was on my end. Mods can delete this post.

some time ago the jack imput of my amplifier burned so i was searching for a replacement but i didnt find one so i was wondering how i can get this piece 

how do i identify which size my earphones are?

Hello Guys,

i've been researching about Edward Van Halen Brown sound for 10 years. I mean the VH1 and VH2 albums.

I've tried many brown sound amps like the bray 4550, many plexis, sv20 and so on. I've come close with them but there always seemed to lack something.

because of that i've learn how to build amps to fulfill my quest and i think that by accident i found what was perhaps going on in eddie's amp. I believe i've perhaps built the best brown sound sounding amp and i want to share the mods i used with marshall.

I believe it was modded because in a biography released by journalist Neil Zlozlower José arredondo is interviewed and he said he created eddies tone with him and that the amp was really modded. José was at the end of his life and stopped modding amps he had nothing to win. Moreover eddie never denied this claimed from his biography. Then there is Rudy leiren which was eddie amp tour tech, josé was more the modding amp tech. Rudy leiren also admitted that the amp was modded. 

If Steve Fryette, Mike Solano, John Suhr and Dave friedman said that the amp was stock it's only because josé put the amp back to stock. Dave friedman even admitted in a live stream that half of the components were not stock but some had stock marshall values. here is a picture of Eddie's amp on the top (by dave friedman), the bottom one is a stock super lead 68 12309 8 numbers appart. :

See those cherry drop capacitors ? those were used a lot by José to mod amps. It's like one of his signatures.

It has been 2 years that i build amps and this year while experimenting with mods with Eddie's amp preamp specs (the ones leaked by dave friedman) i've managed to get closer than anything i've heard and it happened by accident. I inspired my mods by José arredondo mods (he was ed's amp tech from 71-72 until 1979 after being diagnosed with cancer). I was modding my amp and i forgot to solder something back and i turned the amp on and suprise i got the brown sound with this extremely rich and thick distortion. I was like wtf... ?!!!!!!!!!! then i checked my board and saw what happened. 

i'm not claiming it's the exact same mods eddie had but i believe it's close enough to offer to sell a brown sound amp for guitar players. It's way better than any brown sound amp that i've  ever tried for Vh1 and Vh2.

i've even made a website related to the tone (there are many corrections and updates to do) 

I really dig everything about his tone his humbuckers etc. For example i recently learnt that eddie used 12H30 55hz blackbacks combined with 20w greenbacks and got the confirmation by someone selling original cabinets owned and played by eddie during his early tours. The JBL d120f were there only to fill voids on the top cabs.

His first frankie humbucker was probably a dimarzio paf then when it got painted he used an overwound PAF from an es-335. The Bumblebee used an overwound dimarzio super distortion from the 70's. He later swapped the ceramic magnet for the one in the paf (which is probably alnico V). He then asked Duncan to clone the super distortion in black and decided to swap to alnico 2. This is the humbucker for fair warning and women and children first. for 1984 the kramer 5150, it was a damaged duncan JB reading 180k instead of the usual 16k this was recently confirmed by larry dimarzio

I wanted to share my findings with marshall amplification. if Marshall doesn't want it then i'll probably make the layout free access for everyone... and only those who will get their amp modded will be able to enjoy it...

it would be a waste to not take advantage of this and to give guitar players an opportunity to get this sound.

So is there any possibility to contact your team of research and development concerning guitar amplification ?

I have a DSL40cr. I also have an 8 ohm (2x12) cabinet.  The DSL40 onboard speaker is plugged into the 1@16 ohm input.  When I run my 8ohm cabinet (plugged into the 1@8ohm output), can I run the onboard speaker at the same time, or do I need to unplug it? Asked another way, can I run the onboard 16ohm speaker and the 8ohm (2x12) cabinet at the same time?

My MG30GFX-H Amplifier tends to fade after a short while and sometimes gives me sound settings that I don`t want.

Can this problem be remedied as I have not had the amplifier long and not used it much?

How do you use the tuner on my New MG15GFX combo amp.

I've recently bought the DSL1-CR and i want to praticse with headphones, but if plug them to the emulated output the sound comes out from the speaker, i decided to check on the instructions where there is written that in case of i have the DSL1-HR i must umplug the speaker from the amp, but there are no information about the CR. 

Can you help me?

Regards,

Lorenzo.

good morning I purchased a marshall code 50, I immediately updated the firmware to version 1.48, I performed all the possible procedures for connecting to the phone, when I press rev and pover it goes into pairing mode and the blue light flashes but no phone that I have tried and sees it in the devices, is there a solution for this problem?

was wondering if the 2 way footswitch can control the inbuilt pedals in the amp instead of making a whole new preset but with the pedals turned on?

also if the 2 way cant can the bigger footswitch?

always say client credentials could not be retrieved