Questions
Showing results 41 to 60 of 166
0

votes

0

answers

381

views

Hi Guys and Gals and the Marshall Team... I am trying to connect my Marshall CODE Amp to my Laptop via a USB Data Cable but its saying "CODE: Not Connected".. Any Solutions for a fix??? Do i need to PAIR my code amp with bluetooth again????? Thanks Ben

asked 06 Jul 2020 at 05:52 PM

Brendan O' Dwyer
0

votes

1

answer

608

views

I am looking to connect my code 25 to my laptop and hence looking for the correct USB cable type/spec. Should I buy a USB type A or type B?

Thanks

asked 05 Jun 2020 at 09:47 AM

monoj chakraborty
0

votes

0

answers

315

views

I am trying to record my guitar on studio one connected thru' code 25. since code 25 does not have its own driver,  i have installed ASIO4all driver, which is allowing studio one to detect the code as an input device, when I am connecting the code 25 thru' the USB port to my laptop.

unfortunately , when i am trying to record my guitar, no input is detected in the DAW and the file recorded is a blank one.

Am I missing something here or is there a studio one specific setting to allow recording thru' code 25?

Thanks for an early reply

best

asked 04 Jun 2020 at 02:08 PM

monoj chakraborty
0

votes

1

answer

407

views

Hello everyone, i have a code 100 combo and it has a FX loop so i use a D/O pedal in front as a preamp, the amp and cab and then i have the effects in the fx loop, sonds amazing and i'm very happy with it, now the problem is when i try to record with my PC using the USB conector from the Code into my DAW, the result is nice i have the great sound from the code but it doens't record nothing from the FX Loop so all the modulation effects, delays and revs cannot be record it, i can hear them when i'm playing but when i hear the track in my PC, all the fx are not record it, is there something i can do with it?, Thanks.

asked 02 Jun 2020 at 02:55 PM

Juan Carlos Tarifa
0

votes

2

answers

512

views

I just bought a Code. I can connect via bluetooth however it won't download any patches because it says it's not connected even though it is. I bought the USB #2 cable (that doesn't come with the amp) and the amp still says it's not connected to my computer even though it is. Other modeling amps don't have this issue. Marshall, you REALLY dropped the ball on this amp.

asked 30 May 2020 at 12:46 AM

Scotty Hayes
0

votes

1

answer

401

views

Hello Marshall! I have a problem with my Code 25. For several months everything was fine, I could connect it to a computer and use it in DAW, but recently the next time I connected it, the computer stopped detecting it. I tried 3 different usb cables, but that didn't help. Please help me, I love my code.
P.S. Sorry for the English, I used a translator, since I am from Russia and do not know the language well.

asked 16 May 2020 at 08:38 AM

Adel Nurmiev
0

votes

1

answer

964

views

Can you download user patches from your phone via blu tooth or do you do you have to connect your device via USB cable? 

2nd question - if it is connected to USB cable, does it work normally? I ask because I had a line 6 that required a printer type USB cable, I bought several and none of them worked. I'm wondering if the Marshall Code 50 is this finicky too. 

asked 13 May 2020 at 02:24 PM

linh tran
0

votes

1

answer

571

views

I have tried everything to do the firmware update on my new Code 25.  Its showing v1.11 still.

I have tried Crome, Edge, and downloading the manual windows exe.  I have updated drivers, booted amp in "safe mode" (which identified usb as READY but still wonnect connect in My.Marshall 

Please help!  I love the amp but need to be able to update the firmware

asked 15 Apr 2020 at 08:54 PM

Joshua Brown
0

votes

1

answer

617

views

Si alguien podría ayudarme a cómo solucionar. intenté de muchas formas actualizar, desinstalar, etc pero no hay manera de reconocerlo, sí se genera el sonido al conectar el puerto USB pero inmediatamente sale que windows no lo a reconocido ERROR CODE 43 en windows 10.

asked 02 Apr 2020 at 10:16 PM

Toshio yasuda romero
1

vote

1

answer

693

views

I recently connected my code via usb....went to ACDC preset, downloaded to test it out...I liked it but didnt save it...now when I come back to save it nothing (any preset) will not transfer to my code....It reads CODE connected....Help please!!!

asked 20 Jan 2020 at 02:02 AM

Eric Deaver (1)
0

votes

1

answer

1.1k

views

I recently got a Marshall  CODE 100 and I also recently got a Scarlett 2i2 recording interface. Before my CODE 100, I have been recording my guitar by going straight into the interface and using Pro Tools First. That worked fine. I even have been able to use pedals with my guitar and put that right into the interface. However, I want to be able to tweak my tone via the CODE 100 and still use my Scarlett and Pro Tools First. How do I do this? I do not see a line out on the CODE 100 head (I have a head and a Marshall 2x12 cab).

 

I am scared to really try because I am seeing mixed comments online. Some are saying it's very dangerous to go straight from the head to the computer via USB WITHOUT having it plugged into the cab because it could blow up the head? Some are telling me the only way to do it is it order a 1/8" to 1/4" cable and monoline it out and straight into the Scarlett interface from the headphone jack?

 

I cannot find a clear answer to these questions. Please, someone, help me. 

asked 08 Jan 2020 at 08:04 PM

colt eaves
0

votes

2

answers

815

views

I am not able to transfer presets from Mac to Code 50. The display below preset shows code not available though usb is connected

asked 28 Nov 2019 at 01:11 PM

Uday Shetty
0

votes

1

answer

636

views

Hi have a Marshall code 50 what usb cable do I buy to fit to a iPad Pro ?

asked 25 Nov 2019 at 10:12 AM

Robert Bruce
1

vote

0

answers

743

views

Hi. I have a question: The Code USB interface is ok only with pc or it work with really usb midi? With usb midi pedal like Midi commander by Meloaudio, for explample, work or not?

if it work only with pc like daw is very very poor choise. next firmware? the orignal PDL 91009 is ok, but it's very very limited.

thx 

paolo

asked 19 Nov 2019 at 05:32 PM

Paolo Goi (1)
0

votes

0

answers

626

views

I have a CODE 100h + CODE412 and I love them !!!!
I use a pedal board with different effects and was thinking of adding a looper / switcher (Boss ES-5 or MUSICOM LAB EFX LE).
I would like to know if with the looper I have listed I can change presets to CODE100H via midi. Do I need a USB / MIDI interface? Thanks

asked 18 Nov 2019 at 05:01 PM

Ziggy 75 (10)
0

votes

1

answer

514

views

I have seen a couple of questions pertaining to usb connection from Code USB to iphone or ipad for recording in garageband, etc. 

The answer given by Marshall reps was the same for both and that something about difference in usb 2 and lightning cable.

My Question is: Will an iphone camera connection kit correct that issue? It has the female end input of USB on it.

I use it to connect my Arturia Keylab Essential to my ios apps and it works fine. 

I’d hate to damage my Code 50 though so I came here.

Hoping for a speedy response.

asked 12 Nov 2019 at 02:49 AM

Jamie Caudle
0

votes

1

answer

460

views

Je viens de recevoir le Marshall CODE 25 et j'ai essyé de l'utiliser directement.

Plusieurs critiques :

- Aucun manuel papier

- Pourquoi utuliser un Mini USB Type B (souvent utilisé pour les caméras, les appareils photos ou les manettes de console de jeux) quasi plus utilisé, et surtout pas fourni ?
Pourquoi pas un Micro USB Type B (répendu partout) ou usb normal, voir usb type C dans ce cas là c'est le futur ...

-Les vidéos tuto sur le site ne sont pas assez complètes.
Par exemple le playback ... Je n'y arrive pas.
-
C'est dommage de devoir remplacer des resets d'usine pour mettre celles que l'on créé, ou alors il y aurait fallut un autre moyen sans passer via PC ou Smartphone... Il y aurait dû avoir quelques pistes prévues, ou un port usb, micro usb pour mettre une carte mémoire.
-
Pareil pour le pédalier pas de manuel papier, un peu chaud à comprendre au début sans explications.

J'éspère que vous pourrez me renseigner.

Pour n'y a t'il pas une notice, un manuel, papier ( voir un PDF via internet) qui explique tout le fonctionnement les mamip' comment utiliser toutes les commandes de cet ampli, simplement.
Et pourquoi ce port USB ??? et aucun OUTPUT ...

asked 01 Nov 2019 at 05:31 AM

bussi damien
0

votes

1

answer

480

views

Hi I have a Code 25 which has just giving" Check USB" when switched on when USB is plugged in says "Ready" and I still cant connect did a system reset still the same. Is it dead? or is there somthing else I can try?

asked 24 Sep 2019 at 01:12 PM

Wade Chandler
0

votes

3

answers

1.1k

views

Hi Marshall team! I recently got my awesome Marshall Code 50, and it has great tones and great sounds! However, would you recommend recording (for a serious album) with a microphone, say of course Shure SM 57 or will it sound better by plugging in the amp via USB to my computer? Thanks!

asked 11 Sep 2019 at 10:10 PM

Walter Monsanto
0

votes

3

answers

702

views

Hi! I have an issue while trying to transfer dowloaded presets to my Code25. It occures both usb and bluetooth connections.  On a usb connection i click the “amp” icon on a preset, it’s name appears on a Code screen. I push and hold store button on amp, “saved” appears. But then Code becomes freeezed, it does not react on button push etc. when i switch it off and then switch on it works fine, preset available on amp. The same issue appears when i try to transfer presets using Gateway app. What I do wrong?

edited 20 Aug 2019 at 05:44 AM

Alexey Kornilov

asked 20 Aug 2019 at 05:43 AM

Alexey Kornilov
Showing results 41 to 60 of 166
Loading - please wait...