Questions
Showing results 41 to 60 of 85
0

votes

3

answers

702

views

Hi! I have an issue while trying to transfer dowloaded presets to my Code25. It occures both usb and bluetooth connections.  On a usb connection i click the “amp” icon on a preset, it’s name appears on a Code screen. I push and hold store button on amp, “saved” appears. But then Code becomes freeezed, it does not react on button push etc. when i switch it off and then switch on it works fine, preset available on amp. The same issue appears when i try to transfer presets using Gateway app. What I do wrong?

edited 20 Aug 2019 at 05:44 AM

Alexey Kornilov

asked 20 Aug 2019 at 05:43 AM

Alexey Kornilov
0

votes

2

answers

789

views

Hello All,

What cable does someone use to hook up their ipad to a Code 50? it would a lightning to a ???

And why does one need a cable to  hook up to the Code? if the Code is synched via blutooth then anyhting on the APP, such as updates or presets, should also be able to get tot he Code via the blutooth and not need a cable. Could this be a glitch on Marshall's end or  they just never programmed it into the software to do it. Seems like an oversight, no? 

 

Thanks for any help anyone can give,

Lou

asked 15 Aug 2019 at 06:42 PM

Louis Cernilli
0

votes

0

answers

857

views

Hi, 

I have had my code 25 for about 6 months and for a while now, everytime I connect my phone and edit in the gateway app the preset freezes and I cannot change anything or change the preset. On the phone it says I am changing but there is no actual changes happening. On the little orange screen on the actual amp it stays on that preset even if I twist the knob to change preset but can still play and change volume.

TodayI was getting sick of it and looked up if there are updates for the amp and there are, which I then went and installed the latest firmware update. But now when I turn on the amp it shows that it's on and shows the preset but stays frozen and will not play sound at all. Is the amp done or can it be fixed?

asked 13 Aug 2019 at 08:03 AM

Krishan Talati
0

votes

1

answer

807

views

Can I save downloaded user presets to my footswitch and how???

Using the Code 50

asked 04 Jul 2019 at 08:40 PM

joe wheeler
0

votes

0

answers

567

views

 

 

Running V1.43 firmware.

I have followed all instructions and can not get the iPad 6 to connect in Gateway app.

It, however "pairs" just fine Bluetooth wise on the iPad 6! 

AND Gateway works well on my iPhone 5, switches presets and everything.

So I know I am doing this right and the Marshall code 100 Head is responding via Bluetooth (with my iPhone 5) but NOT with the iPad 6.

 

Edited: Its the damnedest thing. I removed and reinstalled the app on my iPad 6 at least 8 times with the same results.  

 

Then I reinstalled and paired the "9th" time, and it worked!!!!

I can turn the 100 Code head amp off, and back on and it still connects.

 

I'm glad it works now, but I dunno what I did differently.

 

 

 

 

 

 

edited 02 Jul 2019 at 06:24 PM

Michael Howell

asked 02 Jul 2019 at 04:17 PM

Michael Howell
0

votes

1

answer

571

views

Hi 

Recently installed Gateway on my phone. I tweaked a few presets on my Code 50 manually. Can I Sync those custom presets from Code 50 to Gateway?

And how do I go about?

Regards

asked 30 May 2019 at 11:09 AM

Riaan Swart
0

votes

1

answer

876

views

My CODE 25 connects to my PC via both through MIDI in Chrome and through the Firmware Update Utility but it refuses to do anything but sit there while the gold loading circle just spins and spins. I've left it for upwards of 30 minutes. I'm unable to click on check for updates or anything. Tried rebooting a few times, tried turning blutooth off while doing it, etc. My amps current version according to both the amp and the app is v1.3. Any suggestion on what to try? Should I do some kind of factory reset to the amp and try again?  Any help or suggestions would be appreciated.

As a side note, I'm also unable to "download preset to amp" to test it out even though it's giving me the go ahead to do it on the preset site. I'm sure the issue is connected to being unable to update the firmware.

Thanks!

asked 21 Mar 2019 at 04:15 PM

Brett Ewaschuk
1

vote

1

answer

962

views

Hello, just purchased a Code 50 and so far I'm very happy with the amp but there are still a few things unclear with the Presets and Gateway. I have connection with my laptop or via android, that all works fine. I've downloaded a few presets from the website and want to use them on the amp. 

- The standard 100 presets are  there when I connect to the amp. If I want to add new presets do I have to override one of the standard presets? I thought 200 was the limit?
- And another thing,  if for example I upload a new preset to the amp the name of the preset doesn't show in the display. 

I tried the manual or Youtube tutorials but none are very clear on this subject. 

 

 

asked 06 Mar 2019 at 09:45 AM

Wim de Nooijer (1)
0

votes

1

answer

642

views

Hi all,

 

Just purchased a CODE 50 and am very pleased with the purchase, great modeling amp. However, I downloaded the Gateway app and any changes I am making on the my.marshall.com website do not seem to be syncing with the app. I added new presets from the user presets section but the change does not show up on my app (old preset I had is still there and not replaced). Also, now I have duplicates of several presets! No idea why. Every preset from 51 on is duplicated so now my list of presets is up to 148. What gives?? How do I correct these issues or are these known issues? 

I am using an iphone8 with iOS 12.1.4

Any help would be much appreciated and let me know if I am doing anything wrong. Thanks.

 

Jared

asked 05 Mar 2019 at 04:43 PM

Jared Wasser
0

votes

2

answers

779

views

I've owned the new Code 50 for only a few days so I'm still a novice navigating through all the features. I'm just getting into using the My Gateway app from my Iphone and noticed when I'm connected to the amp through Bluetooth and I have the "blue" presets showing on the app which are completely different than the presets I see on the amp when I'm not connected through the Gateway app. So for example when connected through bluetooth I see preset 00 as EL34 Heaven on both my phone and on my amp,  and when I'm not connected through bluetooth preset 00 is JTM Chill. I like the settings on the gateway app much better than what I have for presets when just using the amp without bluetooth. I guess what I'm trying to do is find the easiest way to say replace 00 JTM Chill with 00 EL34 Heaven so I can have 00 EL34 Heaven on the amp without having to connect using the gateway app? I've look at other questions and cant seem to find this answer. Is this the sync function?? Thanks in advance. 

 

asked 24 Feb 2019 at 04:49 AM

Ron DeMartino
0

votes

1

answer

853

views

I know I can override any CODE amp preset with CODE USB connections from the website or by changing on my phone while connected and saving either on the phone and/ or amp.  But How do direct amp changes work with Gateway while disconnected and then synced later on?

 In other words, if I save modifications on my amp to a particular preset and I am not connected to my gateway on my phone, when I do connect and sync later, which setting wins?  Does the phone setting override the amp-stored setting (ie. back out the mods made on the amp / push the settings to the amp from the phone) or does the phone pick up the modified amp setting from the amp and store it in Gateway (ie, pull the settings from the amp and store in my phone)?  

Also, I have the first 30 presets set up for ones I use to perform and are addressable using code programmable foot controller.   If I want to archive/backup those presets someplace to guard against an unplanned need to do a factory reset, does it make sense to store them perhaps in the cooresponding setting in my Library ( the blue section of My Gateway )  That way i can bring them into the amps and store them one at a time from the library back into the presets on the amp, or is there a better way to backup/restore presets in the event of a factory reset?

Thanks!

 

 

asked 07 Jan 2019 at 06:20 PM

Stephen Sterner
2

votes

1

answer

1.1k

views

Hi,

 

I would like to knwo if there is a way to sync the MY GATEWAY presets and the Marshall CODE presets all at once?

 

I came here and downloaded a bunch of presets from the comunity and now there are like 30 presets in my phone, but these presets are not in the amp memory.

 

I could go one by one, saving the preset on the amp memory but I want to know if there is a way to do it all at once.

 

One click and all the app presets are equal to the amp presets

 

thnaks in advance guys

asked 19 Nov 2018 at 06:36 PM

Andre Vieira (2)
0

votes

1

answer

2.1k

views

I purchased a Marshall CODE 100H + 212 Cab recently.

I downloaded the Marshall Gateway app and have created a My Marshall account.

 

The Amp came pre-loadedwith a 100 presets.

The Marshall Gateway app also came pre-loaded with 100 presets,

but the Gateway app presets are different from the ones in the amp.

 

 

I synced the 100 presets in the Gateway app to my "My Marshall" account Library.

 

I have edited and saved some of the Presets on my Amp.

I want to transfer the edited Presets on my Amp to my "My Marshall" account Library, and then put them in my Gateway app, 

How do I Transfer a Preset FROM my CODE Amp to my "My Marshall" account Library?

I see the option to transfer a Preset from My Library to the Amp,

and I understand how to manage / organize the Gateway app presets from the Library,

but I don't see a way to put a Preset on the Amp in the Library.

Do I have to manually re-create it in the Library?

 

The My Gateway online interface is  great for managing / organizing the Gateway app presets from the Library.

It would be useful if there was as similar interface for managing / organizing the presets on the Amp, when connected via USB.

 

 

asked 27 Oct 2018 at 10:18 PM

A. Todd Henker
0

votes

1

answer

1.6k

views

When I download presets from the My Marshall website, how can I then transfer/import them to either the Gateway on my iPad, or to the Code 25 amp itself?

I can control the amp from the iPad, but it will only let me use the 99 presets already loaded.

 

 

asked 20 Sep 2018 at 04:29 PM

Nick Robertson
0

votes

1

answer

557

views

I have several feature pre-sets saved in My Library (Laptop using Google Chrome browser). How do I get them into my Code 50 or the Gateway app?

asked 12 Aug 2018 at 12:10 AM

jeff kochie
0

votes

0

answers

696

views

Just got my CODE 100 2x12 and I can't seem to sync up the presets I've chosen on my PC, I'm using my Android device and sometimes they're there, sometimes incomplete, sometimes reverts back to factory. The android app seems faulty. If I hook the amp up to my PC will it always remember the library presets? I don't want to rely on PC or Android to remember my hard work.

asked 04 Aug 2018 at 10:29 PM

Justin Wandell
0

votes

1

answer

1.1k

views

I have successfully synced some presets onto the Gateway App on my phone and can use them when my phone is connected to my Code 50 amp via bluetooth. Is there anyway to overwrite the presets on the amp with presets on the Gateway app, so those presets are available without connecting to my phone? Thanks!

asked 14 Jun 2018 at 02:47 PM

Tom Appelbaum
0

votes

2

answers

1.9k

views

I connected my Code 50 to my laptop via bluetooth, but the my.marshall presets says "CODE not connected". I tried connecting via USB, but the amp has a goofy connector that standard USB cables do not connect to. Also - I can connect via the Gateway app on my phone, but the presets I add to My Library do not show up (even though it says that they have synced). 

asked 11 Jun 2018 at 10:11 PM

Tom Appelbaum
1

vote

1

answer

3k

views

Hi I have had this Marshall Code 100 for a few weeks now, mucking around with it to try and figure it out and finding it to be a little user unfriendly. What I want to do is to change a single preset to what it was originally (eg factory setting) without doing a factory reset and losing all my other changed presets. I cannot find any joy anywhere about this. Also, when I look at the list of 100 presets online (there are a few lists going around in chat forums and also in the gateway section of this website) I can only ever find the 100 presets that are on the phone gateway app and not the list that was originally on the amp (for example on my amp when I factory reset it, 00 is JTM Chill, 01 is "So American" etc, whereas my gateway library has 00 as EL34 Heaven and 01 as Plexi Classic). So I cannot find the actual standard amp preset list anywhere online or within the Gateway app.

My questions boil down to three:

1. How do I restore an individual preset to what it originally was (without performing a factory reset)? 

2. How do I even know what the original preset was called?

3. Say I connect my smartphone to the amp via gateway and bluetooth. If you click on the arrow on the right hand side of one of the presets in the library, it takes you to another screen. In that screen it has an amp section and a library section, with 2 small boxes you can tick next to each. What is the purpose of this screen and ticking the boxes? Like what can you actually change on this screen is it just the name of the preset or can you replace a preset that is on the amp with one that is in the gateway library?

Needless to say I am very confused and was hoping to be way ahead by this stage. Please help!

 

edited 26 May 2018 at 04:11 AM

julien casella (1)

asked 26 May 2018 at 04:08 AM

julien casella (1)
0

votes

1

answer

685

views

How can you try out a new PRESET without overwriting a PREST on CODE 50 or the GATEWAY Library?  jwaldron007@optonline.net

asked 13 Apr 2018 at 04:59 PM

James Waldron
Showing results 41 to 60 of 85
Loading - please wait...