I am new to guitar and would like some assistance in getting the settings for surf music 

Hi 

have a quick query regarding the footswitch for the jcm 2000 dsl 100

does anyone know if it's latching or momentary type 

I would like to use same with a gcx audio switcher to change channels?

thanks 

So the gig me and my band are about to play is getting closer and closer. 10 more days and I'll be on a stage again after 7 years. Seven years of playing by myself in my bedroom.

I got to the point where my approach would be to set my amp to a crunchy sound ala AC/DC, then kick on my SD-1 with the volume pushed and the gain turned up just a wee bit to tighten the low end and saturate a bit more. Use an EQ pedal in the loop to boost the volume for solos.

Now last rehearsal I turned up with only my guitar and my EQ pedal for the volume bump for solos. I couldn't be bothered to carry my heavy ass all analogue pedalboard with me and wanted to see how things would go. My JCM 2K DSL 100 was at the rehearsal space waiting.

Without my SD-1 I had to turn up the gain on the amp quite a bit more and change the EQ as well, cut more bass, kick in more mids and I was obviously missing some saturation. 

So whilst it was harder to play and I lacked the distortion I also noticed that the guitar sounded way better and I cut through the mix easily. My other guitar player uses an ENGL Powerball MK2 through an oversized ENGL cab with V30s without any pedals, I have my DSL through a Marshall cab with G12-75s (cab belongs to another guitar player sharing the rehearsal room with us)

Now the obvious problem here is that I am competing with a V30 loaded cab whilst using the mid scooped G12T-75 Celestions, but if you ignore that for a minute my observation is the following:

Without a boost pedal my guitar sounds bigger and fits into the mix better. I have to be more accurate with my technique and my playing has to be tighter. More volume means less need for saturation and compression that a boost pedal usually provides yet it asks for a tighter picking hand.

I guess what I am trying to say or rather ask: Have you had the same experience? A boost pedal is brilliant when playing by yourself to get an amazing guitar sound, once the whole band is involved the pedal only buries you in the mix? xbxx xnxxxnxx

I think I finally understand how desirable it is to have an amp that does not need any additional help from an OD pedal. My DSL can sound as heavy as a Mesa Rectumfrier, but only when pushed by a TS-9 or SD-1. With the band it sounds better when no pedals are involved. pornhub

I came to the conclusion that I need to toss the gadgets and work on my technique more. Only use the boost pedal for solos and get to the point where my right hand will sqeeze a tight low end even out of a JTM 45. porn hun

Or I'll just bring my V30 loaded cab to the gig, kick on my SD-1 for my rhythms too and see how that goes  biqle youporn pornhub

What are your observations folks? Do tell, cheers! live-sex

xnxxvideo porndollz xtreamporn xnxxhub

Bought a CODE 50 for my grandson for Christmas and have been trying to get a response from Marshall to have this Amp fixed ior replaced. I've tried 2 different power chords with no effect.. I've sent 4 different e-mails and called youyr number without any response. I do get a letter from the SULLIVAN GROUP...Please help

Hi Everyone,

I recently just got my Code 25 after many months of waiting for it to be back in stock. I'm loving it! There is so much to play with and so many different tones to explore.

I connected it to my phone and I love the feature of adjusting the settings with my phone. However, when I tried to download presets from the website, it won't let me.

I just wanted to ask, must the amp be plugged into a PC/Laptop in order to download the presets from the website or can this be done with just your phone?

The only reason I ask, is my laptop is very outdated and given that you can do everything on a tablet or phone these days, Iv'e never had the need to buy a new one.

Any help would be great as Iv'e some awesome looking presets I would love to try out.

Thanks.

Hello,

I have a DSL15 that is humming a 120 Hz tone, even with all controls down. This tells me the trouble is in the power section. I checked the bias voltage of both 6V6 tubes, and they are there. However, when I checked the voltage across the plate current sensing resistors, one is around 24 mV, and the other is virtually zero. I swapped the tubes, and the voltage values on the resistors went the other way round. It looks I have a bad 6V6 tube, but I'dlike to confirm before I go buying a new one. Any thoughts?

Thanks!

HI ,

I could not locate the Model Amp for my new purchase. Where can I get the model number?

Cheers! 

Hi Marshall Support,

I own a Marshall Code 100 combo. My question is, if I plug my amp to a pa system via the rear speaker connection, the speaker on my amp doesn't work any more. How do I regulate this. I want to hear my amp at the same time it's connected to the pa system.

Thank you for your answer,

Andy

Hi, I’m in New York and I wanted to buy a Marshall DSL 20C, but ANY store keeps one new, so I wanted to know if you recommend me to buy a code 50, a origin 20, a dsl40c or any other?

I've had my dsl 401 for about 12 years. In the United States. From the beginning, it would lose power, go silent, but then come back. Now, it has gone completely silent, won't come back, and I can't find a certified Marshall repair listed anywhere in the United States. All my searches, including on Marshall's own website, state it is for UK customers only. This issue is common with this amp. Can you point me in the right direction? I am not an engineer.

I own the Marshall CODE 100H and CODE 212 cabinet.

I really love this amp, but I find the MY GATEWAY web page interface to be somewhat awkward to use.

The following are issues that I would like to see changed.

All references to the MY LIBRARY list are referring to the list below the MY GATEWAY List on the MY GATEWAY web page.

1) On the My GATEWAY web page, the preset list at the top is arranged by columns (as it should be), but the MY LIBRARY list below that is arranged by rows.

This makes it very awkward to find a preset in the MY LIBRARY section. 

The MY LIBRARY section should be arranged by columns as well.

2) There is no indication in the MY LIBRARY section on the MY GATEWAY tab whether a preset is or isn’t in the MY GATEWAY list.

This makes it awkward to know which presets from the MY LIBRARY are used in the MY GATEWAY

I would suggest adding the MY GATEWAY preset number to the MY LIBRARY list as the indicator.

3) There is no indication in either list whether a preset has been Modified or is a Factory Preset 

(must copy to MY LIBRARY section below and then edit to know if it was changed-not as convenient as it could be if it was marked as Factory Preset or Modified in the list)

4) There is no way to compare presets in the MY GATEWAY list vs the same named preset in the MY LIBRARY list.

(And a preset can be changed in the mobile app or on the amp and synced to the web, 

but the change doesn’t get applied to the same named preset in the MY LIBRARY list,

so the MY LIBRARY presets become inconsistent with the same named preset in MY GATEWAY. 

And, there’s no indication that the same named preset in the MY GATEWAY list is now different from the MY LIBRARY version.

Must be constantly manually checking / updating the MY LIBRARY list.

There should either be a “Date Changed” field in the Edit Preset dialog box so you can know which one is the most recent, or

There should be a prompt or checkbox to update the MY LIBRARY preset as well.

There should be a way to select two presets and then select “Compare”.

The compare screen should highlight the differences.

5) Renaming a preset in the MY GATEWAY section doesn’t also rename it in the MY LIBRARY.

Requires either deletion of the preset in the MY GATEWAY list and re-addition of the renamed preset,

or edit same named preset in both lists.  There should be a prompt or checkbox to update the MY LIBRARY preset as well.

6) Multiple presets can be named the same thing but have different configurations (really bad idea!)

This makes it hard to know which one is the most up to date.

This should be prohibited.

Copying a preset to the Library should pop up a warning message that a preset with that name already exists, and ask to replace or rename it differently.

7) Preset settings can only be  viewed / edited in the MY LIBRARY section but not the MY GATEWAY section.  

This means that you have to copy a preset from the MY GATEWAY list to the MY LIBRARY section first.

Then hunt down where it went in the MY LIBRARY list in order to edit it, Edit it, and then copy it back to the MY GATEWAY list. 

That seems to be a lot more awkward than it ought to be. It should be possible to view or edit preset settings from either list.

8) It would be nice if a preset could be marked as a favorite.

9) It would be nice if all Factory Presets had audio preview samples.

10) It would be useful to have a way to record a short audio sample via bluetooth on the mobile app and then be able to save it automatically to SoundCloud and add the url to the preset.

11) Where do I find backing tracks for to use with the amp?

Is there a available dust cover for a Marshall Origin 50H head?

Hi guys,

I just recently had my Acton 2. After connecting app it prompted a firmware update . After update is 100% completed it disconnected and doest work anymore. Both Bluetooth and Aux are lit. Tried to do the unplug and plug or reset but no success.  Thanks for the help in advance.

Hi,

I'm looking for preset for Sweet Dreams performed by Marilyn Manson.

Thanks

Some how, I was playing with my foot switch and erased all of the presets, leaving me 2 channels, working on clean.  The other 2 channels, od1, and # 4 crunch, do not work.  Can anyone help?

Hi,

Just received my Code 25.

I can't download the Gateway app on Google play store (Android) as I get a message "Your device is not suitable for this app" or something along those lines.

I use a Huawei P9

Any thoughts?

Thanks in advance

I am getting a high pitch squeal out of my amp but only in the OD1, and OD2, channels in anything above green channel. Tubes have checked out fine. I am using a pedal board through the FX loop but I also use a Voodoo Labs isolated power supply. And I have pulled each pedal out of the loop, one at a time to see if it was a specific pedal that was causing the issue.  Still squeals even without pedal board. It is becoming frustrating to try and determine what the issue is. Any suggestions or advice?

I can't get the phone app and code 100 amp to connect. bluetooth does connect but the app will not show or allow to connect thus make the app unsuable. i have redownload app manty time. reconnected phone many times. amp is up to date firmware. i have had the app working fine and connected in the past.but now no matter how many redownloads, resets and starting fresh i can longer connect with the app to control it. i have been through every setting and all combinations on connecting updatig reseting and nothing seems to work. need help please. thank you.

I recently hooke this head unit up to a 2 2x12 cabinet 8ohm and per instructions and at full cranked volume barely hear anything

Any suggestions or tips before persuing it being faulty? speaker cable hook up and checked with another cabinet and still same thing barely any volume . 

I have an Origin 20H. When I rotate the tilt control clockwise, the amp produces a tone when an Archer Clean is connected to the input on the front panel and the Archer Clean is OFF.

Anyone else experiencing similar issues?