I bought Marshall CODE 25, connect USB cabel to PC, install ASIO4ALL driver, run Nuendo 4.3, driver Control panel show MONO IN - STEREO OUT, record fine but there is no stereo streaming from PC to headphones, only MONO. Everything is OK in Nuendo Audio Control Panel. I try with Media Player with MP3 files, same problem, only MONO. Try Abletone Live - same problem.

Is this normal for this amp, or mailfunction?

Thanks

Hi, Although My laptop recognizes My code 50 via usb, nuendo 4.3 doesn't (although it recognizes My zoom and korg asio).

Therefore, I'm unable to assign the code has an input for recording via usb. Thanks.

I've been recording on garageband and other softwares for a long time already!

However, I've bought this (crappy) amp to record via USB on these DVAs I'm used to work with. SO, aparently, after questioning people who uses the same amp, and here on the forum, NOBODY could explain the real reason why this "amp" won't work for recording via usb!

The TWO computers I use (macbook and PC - windows7) reconize the amp, however NO SOUND AT ALL are recorded! 

I am familiar with LINE 6 products and I use them a lot. No problem at all with this gear! But MARSHALL, the most famous brand of amps on the world, releases an amp promising to do something they aparently are not able to!

Lame amp! recently bought and, hopefully, recently SOLD! Waste of my time and money! 

Bought a Code 25 few days ago.  Plugged into my computer via usb, using garageband, and the funny thing happens. First, garageband does reconize the amp, however, no sound comes in or out. The volume on the channel of the amp won't work either.

Anyway, assuming it was a conflict between the amp and garageband, I tried it on reaper. Same problem, DAW reconizes the amp, no sound comes in or out. 

Another test, the firmware. Did upgraded it, nothing happened again.

Any solution? I bought this amp exclusively to record via usb, and the main function for me isn't working. Dammit!

I have  a nextbook tablet without bluetooth and i would like to know if the gateway app will also work with a USB connection? I do not have a cell phone to use with bluetooth.

I was using the usb connection to record on Audacity.  The guitar I was using was a Fender Strat with noiseless pups.  I found that the signal stregth was really low and the only way I could get a decent recorded signal was to turn up the master volume to an unbearable level and was close to getting a stern talking to from my better half.  I then tried the same process but used some headphones and this sorted the level issue so it recorded a strong signal.  There was still a bit of crackle on the recording but much improved from the last firmware release.  

I then recorded some acoustic guitar without headphones.  This was a martin DRs1 with a stock fishman pup.  Signal strength was really good and the quality was great.  No hum or hiss or crackle.

Great to hear others experiences.

Tried to update my firmware and tried three cables. None are even recognizing the amp on multiple computers. Tried to reset the settings on the amp and nothing helped. It seems as if the USB port is not working at all.

I can download and run the firmware updater on my Win 10 laptop - it then asks me to connect my CODE 25 amp. I connect the amp using a USB cable - then I see the message "An error occurred: An error occurred getting the device information from your CODE. Please try switching your amp off, and then switching it back on again."

I switch it off and on - no good. Same problem. I connect the CODE amp before running the firmware utility - same result. So I don't even know what firmware is currently in there. Is this solvable? BTW - the USB cable works, as my Marshall CODE Live Editor has connected to the amp using it.

Thx

Is there a capability to control the Code 25 via USB MIDI???

Thanks in advance...

Hello,

I own a second hand 1962 bleus breaker for a couple of years now.

But I would like to know which year he is from I know it's a reissue but that's about it.

item  nr 1962-20-17, 1962-01 (E,H,S,V,X).WO 125766

thank you

I'm having troubles connecting the marshall code to my computer. I'm usings a USB mini-b cable and I cant get the program to work after I follow the procedures. Am I using the right cable?

wont start after i plug in amp with usb

The inability to record using USB makes this product close to a sham. A base feature which is broken really insults your users and is killing sales. Get this fixed now, please, before your costs include my solicitor.

I'm using Windows 10, and the Amp says "USB" when plugged into PC.  I installed the window app, but all it says is "please connect your Code..,".    I checked device manager and it says " Unknown USB device (device descriptor request failed).   I tried uninstall, reboot, reload, etc., and different USB ports ,but nothing works.   

Hi, I want to record using my code to PC using the usb. What is the best free software for doing this (is audacity any good ?). Any other suggestions would be helpful.

regards.

So the amp is great and all, except for the noise introduced via the USB interface and the lack of user-made patches and stuff. So when can we expect a software update to be released? It's been quite a while since the amp was released and I would very much appreciate a fix. Also, will more amp models be added down the line? Cheers.

So...just got my new code 25 the other day and bluetooth hooked up great....played a couple of days and no problems....Tonight..cant get it to hook up.  Any ideas?...Can I ultimatley just hook up USB to my computer and adjust fromt there?

Any plans to release a Windows desktop app for managing presets via USB connection? I'm not an Android or iPhone user. Editing via amp panel is ok, but somewhat tedious. 

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues?  Thank you. 

I'm currently experiencing a problem where the amp locks up on a regular basis.  When it happens, none of knob (gain/low/mid/high/volume) and button (pre FX/amp/mod/del/etc) settings take any effect: e.g I can set a mod effect, but the sound doesn't change.

The amp is paired with my iPad, but when this happens, the iPad is not connected and not even in range.  It seems to be related to having the amp connected to my iMac via USB: after frequent cases of this happening, I unplugged the USB cable and the problem instantly went away.