como puedo acceder al gateway del ampli (code 25) para re acomodar los preset a mi gusto
ya que la paguina solo puedo ver el gateway de la nube
hello,
Bluetooth connection is not very good in my opinion.
Bleutooth signal code 25 is ok, samsung s8 detects it alright.
But when i use the gateway android app it doesn't connect altough it shows in app as detected.
Is there a patch upcomming for the amp code series?
Greetings
I have just downloaded new firmware to my code 50. I dont see anychange. Can i listen to new settings before factory reset! And can i delete any of the factory presets from 00 to 99 and it will be replaced by 1 of the new presets.! Or are the first 13 deleted and replaced by new. Hope that makes sense. Thanks in advance
Why does my code 50 amp cut out? Also, has loud crackeling sound when it's working. Sounds like a blown speaker but it's not. The master volume is only turned up 1/4 of the way and it's loud. Problems still remains even at lower volume. slight delay on the footswitch also when changing from one preset to another. Frustrated in Detroit.
I have the My Marshall app paired with my CODE amp. I have my mobile device (Samsung tabket) connected to the amp via a Micro USB cable but still receive the not connected message. I can't download any user presets.
I've only had my Code 25 for a few weeks now and finally updated the firmware yesterday. Wondering where the promised '13 new presets' were (still only the original 99 on the Code), I started poking around here. Here I've found the 13 new official presets, as well as some other user made ones I'm interested in. But as stated in the subject, I need some help.
First, I chose the Add to My Library Option. Here on the desktop , I see 11 tones (wrong number, but not the biggest issue) have been added to My Library. But when I actually look in the Gateway, again, it's the same original 99 tones. I don't see any of the new ones anywhere. So I'm obviously not able to get these via Gateway right now.
Via the cable, I'm able to sample these new presets. I choose individual presets from the website, load them on the Code (one at a time) and hear what they sound like. But turn the amp off and on and they're gone again. I've tried synching, but that doesn't seem to change anything.
Things seem to be working mostly the way they're supposed to. But I'm clearly missing a finally step or two. I'd like to get at least some of these new (Official/User) presets into my Gateway and onto my Amp. Any help would be sincerely appreciated. Clearly, the simpler the explanation the better.
I'd appreciate any assistance. If appropropriate, feel free to call me 'Dummy', 'Idiot' whathave you.
Dear all.
In my code 50 fw 1.41, when I play, I hear noises eg preset 02,03.04,06,07 ... 93. Is it similar to you or do you have a clear sound (no noise)? My guitar Gibson les paul tribiute 2017 and I use cable Fender FG10.
The best Regards
Jaca
I can send a sample to interested persons
The new Code preset set does not include Heaven. Anyone know where I can get it?
The new Code preset set does not include Heaven. Anyone know where I can get it?
Hello!
I’ve just bought a Code 25 with footswitch and have just started to look at the presets. As far as I can see each amp sound corresponds to a number - for example Bluesbreaker Reverb is assigned to #44. Is there a way or re-assigning this e.g. to #1 ? I’d like to be able access some of the presets easily rather than having to scroll through all of the numbers.
Apologies if this has already been asked on the forum
Many thanks
Robin
I just got my marshall code! There is a lot of really usefull presets! Can anyone please upload Holdsworth's clean and lead tone presets? Is it possible to install Holdsworth's tone with Marshall code? I would appreciate that!
My Marshall Code 100 Combo Amp is making a ringing noise unless i push the the bluetooth Pair option.. none of the knobs or presets will make it go away. however if i turn the master volume up all the way it will slowly as the master volume goes up make the ringing noise quieter.. is it the speaker for the bluetooth or possibly the speakers in general... i literally just bought it and feel like i wasted my money.
Yesterday, I went to my local guitar shop and purchased a Code 100 2x12 Combo and it came with a two-way footswitch. I assumed it would work with it considering I knew it came with a footswitch. However, the footswitch doesnt do much. The effects side does nothing to my amp and when I press the Normal / OD side twice, it will change my amp preset in reverse. For example, if I'm using my JCM 800 tone and I press the Normal / OD button twice, it will go to preset 99. Did they give me the wrong footswitch? Was I supposed to receive the Code programmable footswitch instead and the retail clerk didn't know what he was doing? Or is there a way to program the two way footswitch so it actually can be used effectively rather than a paperweight with a long cable on it? Please let me know as this has been frustrating for me. I play live shows and have shows coming up and can't afford to not have a footswitch.
Hi,
Just wondered if anyone else had noticed that when you send a user created Preset to your amp the settings often don't match the settings shown on the website? There have been a couple i have tried now (including the 2nd highest downloaded Angus Young Preset) that i've sent across to my code only to discover the settings aren't the same as what's listed on my laptop screen? This is really annoying as you then have to tweak everything to match! The preset always sounds better if you match it exactly too as some settings are way off! Can anyone shed some light on this?
Hello everyone. I would like to know if an update for the code was envisaged. if yes, marshall, can you accelerate the time of change of preset in midi .. it's so slow! we have the break of the preset change. it's too bad. thank you
I just bought the CODE 50 and like it alot; I also have the GATEWAY APP on my phone.
(FYI: I literally must have 25-30 other Top Notch Amps- MARSHALLS / SOLDANO / HUGHES KETNNER / LINE 6 etc;
But I needed something very small for some of the tiny gigs we do; and I feel the CODE has better "Sounds" than my Fender Mustang GT - was using)
MY QUESTION:
-I just created 15-10 CUSTOM PRESETSon the CODE. They are obviously saved on my CODE 50 AMP ....as Presets 1 -25;
-BUT: HOW DO I ALSO SAVE/STORE THEM TO MY GATEWWAY IPHONE APP???!! (aka; so I don't "lose' them, in case I want to use on another Code Amp, etc.?)
(Basically I'm afraid if I do it wrong; I'll restore the Factory Presets onto my Amp and all my work will be lost!)
-AND; if I do that; will MY PRESESTS stay in my "APP"; even when the Amp is turned off and not connected to App?
Please let me know and thanks (and any other Suggestions or INTEL!)!
Dave Saul
ELECTRIC DUDES - NY
Dear staff,
I have code 100H with 412. I have add presets from browser, I updated the firmware without problems but when I change preset positions on that page (My gateway) and hit save, nothing happens. I use Chrome and MIDI connection works fine.
How can I solve this problem?
Thank you.
Francesco
Hi,
My son has a Code 25 and the preset knob stopped working i had a look at it last night and tried the firmware update from the web site now it wont do anything and just says check USB. has anyone had this problem or have a solution.
thanks in advance
Alex
I just got the amp and am very close in getting my Strat sound, but, I play my Les Paul a lot more adn am having trouble getting a good clean with depth, not in your face, and slight break up when you hit it hard but clean when you hit it lightly. So far I get either muddy or brittle and no depth. Oddly enough, I got the exact sound from the Blackstar 100 I bought and it was a factory preset right there on the amp ! Then it blew up 2 hours after I got it. Turns out if you upfdate firmware on that one you kill the amp. Saw it on the forums after I did the update. Which is why I ended up with this Marshal Code 50. Any suggestions? I went through all the presets here on this site and just could not find anything. What I like is David Gilmore sounds, Santana sounds, And what I am searching for is a good Les Paul sound with depth, clean , but a bit of grit when you hit it hard , some air to it , and not an in your face sound. Sound is so hard to describe!
i hooked up my footswitch to the code 50 with the lead that came with it. No lights show up, but the preset on the amp changes. What do i do? The footswitch won’t work.