I just haven't been able to choose 3 presets and save them on the 91009 pedal. Could you please help me out with step by step instructions to be able to do this. I just want to be able to pick 3 presets on the amp and have them saved on the 91009 pedal. Nothing I've tried works.

HELP PLEASE!

Hi there! Proud owner of a 50th Anniversary DLS1C. The serial is M-2012-39-0177-2 but the registrstion site says thats wrong?

Can you veiryf that serial?

Thank you!!

Hello,

I have had this AMP for about 6 years and love it. I have been using the FX Loop with the current pedals for a few years now. Suddenly maybe 8 months ago I noticed the signal would be become unstable... I thought it was one of my older pedals. Recently after letting it sit for a few weeks, I noticed the volume would fade to nothing or to near nothing and very treble/tangy like. A few days ago I was playing and I could hear the volume gradually restore to normal... tonight I was messing with it and the sound went to nothing and without warning came back almost blowing my ear drums out. Anyway, I have discovered that the amp works fine if the FX loop is disengaged. Once I put it on it has no volume... which seems to be worse than before.

I have a DSL40C

Kindest regards,

MjM

hi ,

i bought a stockwell 11 mini speaker and its blue tooth has stopped working.i am trying to download update ( that i dont want) and it does not work.tried  pressing button 5 and 15 seconds.what can i do?

malcolm

Are the effects pedals mutually exclusive? It seems like you can't have distortion and compressor (for example), at the same time. Is this right?

Is the USB cable supposed to be included with the CODE 25 amp?  Mine didn't come with one.

I bought a "scratch and dent" DSL40CR from Musician's Friend. When it arrived, it was awesome! The only issues it had were cosmetic and it was missing a footswitch.

Fast forward two weeks later and one day I'm playing and the volume drops and there is distortion even on the clean channel. I took off the back panel and saw that one of the power tubes was not lighting up. I contacted a local repair shop and they said it was likely the tubes. When I checked the bias the power tube that was working was around 35 and the one that was not was around 0. Since I thought the issue was likely related to the power tubes, I asked Musician's Friend if they would send me some replacement ones since I was withing th 45 day return period and they did.

Well, the new tubes arrived (Ruby EL34s) and I installed them and rebiased after leaving the amp on for several minutes. Both power tubes lit up, but I still have the same issue. I'm pretty bummed because I really liked this amp and now I'm worried it's just not built very well.

On a related note: the power tubes that came with my used DSL40CR were TAD EL34-STD Red Caps; are these are not the stock tubes that come with this unit? I'm wondering if maybe the previous owner had tried to mod this amp and did something to the circuit board or something?

One other thing: I plugged in my Orange Crush Mini into the Marshall and the speaker works just fine, sounds great even! So it's not an issue with a blown speaker, it's something with the electronics would be my guess.

I recently purchased a CODE 25 and weas able to connect it with Bluetooth through my IPAD. I recently downloaded a new patch amnd since that time I cannot connect with my Ipad or my Iphone. This amp is almost worthless without that connection. What's going on? 

It's not all the time. But When I make an oo sound, like if I was singing about the "moon", it buzzes on the oo sound. Other than that I have not noticed any problem. Could a speaker problem be so narrow? Or might it be something else? 

Any guidance on things a noob like me can safely look at before I haul this off to a professional?

I´ve never palyed with an Amp Stand. I´ve got a CODE 100c and I would like to know if anyone has the esperience and if it is true that it feels diferent.

Hello,

recently bought a DSL40CR-U a truly fine amplifier brialliant Marshall!

what does the "U" mean in a DSL40CR-U?   thanks Rod

The main problem of Marshall Code is a bad cabinet simulation. You may just turn off this button right on your amp and the sound will get better. Moreover, the compressor helped me as well. If you want to use distortion/overdrive, you may switch Pre FX from this pedal to compressor, but change your amp by means of the button on your amp to sone amp with OD letters in its name. And of course set Gain to it Max setting. You will get such a great but distorted/overdriven (depends on Gain) sound.

I recently picked up a used AVT 150H amp.  Unfortunately, it did not come with a footswitch.  Which footswitch do I need to order to properly work with this amp?

Thanks in advance.

Jerry Singleton

Was wondering why the clean channel on my DSL40CR sounds slightly distorted.  Not truely clean.  Could this be a tube issue? Thanks.

I saw many others hade the same problem but i haven't see no solution from Marshall yet, already re-install the firmware, nothing change it works for some minuts then sounds stop, i turn off/on and sounds get back....
The shop where it was buyed have closed definitively, although it is still under warranty.
What can i do please?

How do I get code 50 to work with Pro Tools? I hooked up the usb cable to my computer, but nothing happens, nothing opens.  Do I use a different Asio driver than the one I use with my MOTU interface? If so will they be compatable with-in the same session? The whole reason I bought the Code 50 is because it advertised as being able to connect as a Interface for recording! So far it's been a nightmare!

Rodney K.

hola banda quiero saber cual es el programa de marshall con el que s epuede editar presets, a demaas de como ocuparlo como interface ,tengo el marshall code 50 

I think that this forum should be dedicated, if not to Marshall Code exclusively, then to Marshall products and not to anything else such as advertisements that have nothing to do with music or our concerns and hobbies.

Greetings

USB connection is broken and "Check USB" shows in the window.

How do I operate the amp?

Wondering how to turn off whatever it is in the amp that is receiving an AM radio station.

TIA

Jack