Running V1.43 firmware.

I have followed all instructions and can not get the iPad 6 to connect in Gateway app.

It, however "pairs" just fine Bluetooth wise on the iPad 6! 

AND Gateway works well on my iPhone 5, switches presets and everything.

So I know I am doing this right and the Marshall code 100 Head is responding via Bluetooth (with my iPhone 5) but NOT with the iPad 6.

Edited: Its the damnedest thing. I removed and reinstalled the app on my iPad 6 at least 8 times with the same results.  

Then I reinstalled and paired the "9th" time, and it worked!!!!

I can turn the 100 Code head amp off, and back on and it still connects.

I'm glad it works now, but I dunno what I did differently.

I'm a beginner. I've experiemented with all the presets of my CODE50. It's an amazing amp/speaker combo. However, I would like to have a better understanding of what the switch and 4 knobs do on my Epiphone Les Paul, apart from all the amazing things that the CODE50 can do. This would seem to require that I set the CODE50 to work as a "pure amplifier," solely increasing the volume of the guitar output, without adding any effects to modify/model its output. Can I achieve this by doing the following using the iPhone app?

Turn to Pedal 1 preset (and not use a pedal)

Keep Pre-Amp at Natural

Turn Power-Amp and Cabinet off

Turn all FX off

Anything else?

Hi all,

Just purchased a CODE 50 and am very pleased with the purchase, great modeling amp. However, I downloaded the Gateway app and any changes I am making on the my.marshall.com website do not seem to be syncing with the app. I added new presets from the user presets section but the change does not show up on my app (old preset I had is still there and not replaced). Also, now I have duplicates of several presets! No idea why. Every preset from 51 on is duplicated so now my list of presets is up to 148. What gives?? How do I correct these issues or are these known issues? 

I am using an iphone8 with iOS 12.1.4

Any help would be much appreciated and let me know if I am doing anything wrong. Thanks.

Jared

I've owned the new Code 50 for only a few days so I'm still a novice navigating through all the features. I'm just getting into using the My Gateway app from my Iphone and noticed when I'm connected to the amp through Bluetooth and I have the "blue" presets showing on the app which are completely different than the presets I see on the amp when I'm not connected through the Gateway app. So for example when connected through bluetooth I see preset 00 as EL34 Heaven on both my phone and on my amp,  and when I'm not connected through bluetooth preset 00 is JTM Chill. I like the settings on the gateway app much better than what I have for presets when just using the amp without bluetooth. I guess what I'm trying to do is find the easiest way to say replace 00 JTM Chill with 00 EL34 Heaven so I can have 00 EL34 Heaven on the amp without having to connect using the gateway app? I've look at other questions and cant seem to find this answer. Is this the sync function?? Thanks in advance. 

I have an iPhone with google chrome installed but when I try to get a preset it says midi not available everything else on Bluetooth is working. Are you telling me I have to have a desk top instead of using my iPhone to directly get presets? So confusing!!

So, for the first time, I wanted to download a preset or “patch” off of the my.marshall site from another fellow Marshall lover. I clicked on the preset link from YOUTUBE, which took me to the Marshall user on MY MARSHALL. I utilized my iPhone so the default browser is SAFARI of course. I read that My.Marshall does not work with SAFARI so I downloaded CHROME to my iPhone which is version 71.0. When I went back to My. Marshall to save the preset to my Library I STILL got the MIDI IS NOT AVAILABLE notice on the bottom of my screen.  I powered down my phone to restart thinking maybe I had to allow the Newly downloaded CHROME to “re-set” but still same thing MIDI IS NOT AVAILABLE.  PLEASE ADVISE as this is SO FRUSTRATING!!!!! Thank you in advance....

Hello, I have acquired the CODE 25, really an excellent amplifier, very versatile and very good presets. My problem and please I hope you help me to resorve it, is that even though I can connect via Bluetooth, I can listen to my tracks ....... the big problem is that when I want to use the FX or presets it appears that there is no amplifier connected ... (either from my android phone or my Ipad I ... I do not understand what the problem is.) Secondly, when I want to install the MARSHALL FIRMWARE UPDATE UTILITY, to enter presets or update the ampli, does not recognize the connection.I request guidance to be able to make full use of such a beautiful tool for my music.I use Widows 10 and G. Chrome.For your attention, thank you very much

When I download presets from the My Marshall website, how can I then transfer/import them to either the Gateway on my iPad, or to the Code 25 amp itself?

I can control the amp from the iPad, but it will only let me use the 99 presets already loaded.

I just bought the CODE 50 and like it alot; I also have the GATEWAY APP on my phone.

(FYI: I literally must have 25-30 other Top Notch Amps- MARSHALLS / SOLDANO / HUGHES KETNNER / LINE 6 etc;

But I needed something very small for some of the tiny gigs we do; and I feel the CODE has better "Sounds" than my Fender Mustang GT - was using)

MY QUESTION:

-I just created 15-10 CUSTOM PRESETSon the CODE. They are obviously saved on my CODE 50 AMP ....as Presets 1 -25;

-BUT: HOW DO I ALSO SAVE/STORE THEM  TO MY GATEWWAY IPHONE APP???!! (aka; so I don't "lose' them, in case I want to use on another Code Amp, etc.?)

(Basically I'm afraid if I do it wrong; I'll restore the Factory Presets onto my Amp and all my work will be lost!)

-AND; if I do that; will MY PRESESTS  stay in my "APP"; even when the Amp is turned off and not connected to App?

Please let me know and thanks  (and any other Suggestions or INTEL!)!

Dave Saul

ELECTRIC DUDES - NY

I am having a problem when I am using bluetooth on my ipad the gateway app will freeze right in the middle of editing a preset. I am not sure if it is a bug or if its my device, but ive tried reconnecting the bluetooth for my amp and gotten the most recent update. So if someone can help me out that would be awesome.

hi

firstly, i am disappointed with the code.  this amp seems like its still at test phase, its to buggy for a release.  would expect marshall to only release a new product unless its 100% reliable.

connecting ios devices to code is always problematic. very unstable.

my main problem now is updating firmware.  cant update in chrome. i have midi capability approved for marshall but keep getting midid disabled error even though i clearly have midi enabled.

tried opera, and the midi is working and the code is coming up as connected. i get as far as a message stating that firmware is updating with a status bar and percentage marker. doesnt update! stays at 0% and never moves. left it overnight and still 0% when i woke.

i have spent more time messing about with the problems with this amp than playing guitar. do i need to sell this and just buy a guitar interface? maybe

also, when using this amp through garageband there is no dedicated clean preset to use with garageband or other AU. basically it goes into garageband with a marshall preset and then the other AU preset is on top of the marshall preset. ideally this amp should include a straight clean unprocessed preset to work with other software AU's.  i really do think people need to consider a good quality guitar interface before purchasing this amp. its very restricitve and unreliable. if you are not gigginG i dont see the point in this amp. 

CAN SOMEONE HELP ME WITH THE FIRMWARE ISSUE ASAP!

Having spent a week amending presets directly on the amp is there any way now to copy them to my iPhone so I can use the iPhone and not use the original factory resets ?

Hi all, hope someone can help me with this,

got my code 25 Friday, all set up starting making a few presets of my own all hooked up working fine.

been using it this evening. Working fine turned off to grab some food came back and now it won’t connect to the Bluetooth. 

My phone keeps showing an error message saying it can’t connect make sure the amp is on and in range. It is and is respectively.

tried all manner of phone first then amp on and off first. 

Went out the car and made sure my phone would connect to that and it did fine. 

Anyone with any ideas?

i have an iPhone 7+ running iOS 11 and a code 25

like a said was working absolutely fine all weekend.

thanks 

andy

Just got the amp a week ago, still playing around with it. Have iphone 7 the app wouldn't stay connected, so am using ipad air app and connection is fine. Hasn't dropped yet and reconnects when amp is turned back on no problem. The problem I do have is when I practice at night and find a setting on a preset I like, but not wanting to 'save' it yet, when I turn on the amp the next morning the app 'restarts' and setting I used the previous night is set back to the first one on the amp "Heaven" or whatever it is. 

Weird thing I can use on and off throughout the day, turn amp on and off, and everything is as I left it, no problem,  both app and amp. The problem seems to happen overnite, the next day the app links up to the amp and it goes back to the first preset, Heaven,  when I want to have it as I left it the night before. Is this an amp setting, an app setting or am I too stupid to figure it out. Logic would be if I turn off and back on during the day and my last setting is there as I left it the same should happen when I turn it on in the morning. Note: I'm new to this amp and don't want to edit or save presets yet, and would like to avoid for time being.

thanks!

I found several presets on MYMARSHALL for Jimi Hendrix and Led Zeppelin and some others while browsing on my PC.  I added them to "my library" and then opened the MARSHALL GATEWAY app, logged in and hit SYNC NOW.  But the 9 presets I selected do not sync with my iphone.  What am I doing wrong, or is what I am trying to do not possible?  Thanks.

100 presets is more than the avaerage human brain can handle, 5 +/- 2 is the old adage.  The Gateway app when active and syncing with the amp displays "Tap to sync" after the first few preset entries.  So you can't efficiently scroll through the presets. Is there a preset listing anywhere on the Marshall Website a customer can print out?

In a future release of the ios app the presets managed by group such as a catagory/folder entry would be nice, e.g. Metal, Clean, Rock, etc ...

Thanks