Hi

just bought a CODE 50.  My iPhone 7 just doesn't recognize the amp via Bluetooth and viceversa ... What could be the problem? Any suggestions?

Appreciate your help

Hi. Just to tell you that it's such a pity that the bluetooth on all codes really sucks.... WTF...... can this problem be solved? 'cause it's really a pain in the a**. 

Good day,

I try connect Marshall Acton to my PC with Bluetooth 2.0, but require PIN code. 0000 or 1111 not work.
What is the pin on this speaker?

The lag time in the release of this footswitch is rediculous.  Why would you promise something that you can't / don't deliver on?    IF the Bluetooth/iphone Gateway App were usable/seemless, the physical footswitch might not be necessary.  IF the parameters of the amp (including up/down patches) were avaiable via the USB port to a Computer program/app, the physical footswich might not be necssary.  IF there weren't Bluetooth and other software bugs, then the physical footswitch might not be necessary.  Unfortunately, IT IS necessary just to use the Code 25/50 remotely as was promised in it's advertising when purchased. Mine is still under Warranty by Marshall.   It is not performing as advertised.  Please send footswitch, or send me a RMA (Return Merchandise Authorization) for the whole AMP  - you pay return shipping...   

I have an Iphone 7, bluetooth is on and it recognizes the amp but no matter what I try, it will not let me start up.  It will not connect.  The only message I get is make sure you are in range?  I would love to use the phone as the amp screen is small and hard to read.

I bought it yesterday and in the store it worked fine but then I turned it off and on again it will not connect I tried everything even deleted the app and it still not connect

"make sure code vo... turned on and in the range " 

please I need help 

Will you ever fix your pathetic Bluetooth conncetivity issues? I have Galaxy 7, but I see it's no diferent n any other platform; your Bluetooth connectivity is downright pthetic; if anyone even manages to connect somehow, the connection drops frequently.  And that's in 2017 when teapots have stable Bluetooth connectivity - are you in Marshall really THAT backward, technologically illiterate, and incompetent?

Promises, promises ... "we'll fix it soon";  " bluetooth issues will be addressed in future firmware updates";  " USB recording issues will be looked into"; AND, a 2-way footswitch will be available for Code 25/50 users when Code 100 is released.  Am I alone in my disappointment for Marshall's seemingly apathetic (non) responses to purchasers of their "not ready for prime time" digital products?!?!?!   I really wanted a Marshall Amp after 45 years as a Fender user.  My mistake.  I should have known better.  Useless, unsupported, glitched, buggy, unreliable, etc., etc., etc.    What say you Marshall in an attempt to save any reputation you thought you had?!?!?!?

It's hard to stay connected with my phone , sometimes during changing the presets  the connection is lost . And it's symply impossible to reconnect .

Is there already an update / sollution ??

Hello, has anyone managed to solve the problem of connection via bluetooth gateway and amplifier? Simply DO NOT EXIST the bluetooth function on this product! 

settings-bluetooth-says connected.  Gateway-menu says not connected.  3 hours of chasing this around in a circle.  I'm not impressed.  Some instructions please.

I've had my Code amp for a couple of weeks and managed to connect it to my iPhone which is running the latest ios 10.2.1.  I also got it to connect to a brand new Samsung Galaxy Tab A running Android 6.0.1.  The connection didn't always work and sometimes dropped out.  I've updated the Amp to the latest firmware to hopefully cure the connection issues and now my phone and tablet just can't detect the amp at all.  I've tried turning on and off, resetting everything, forgetting the device etc. etc. but it's like the amp just doesn't have Bluetooth.  As no device can see the amp then Gateway just isn't possible to use as it also can't detect a phone or tablet. My devices can see each other but it's like the Amp just doesn't have Bluetooth.  I've also tried searching for it with an Ipad but this also couldn't see the Amp ?  It looks like the Bluetooth has died on the Amp but thought I'd ask if anyone has any ideas of anything to try or otherwise I'll have to take it back to the dealer and either try another one or replace it with a Fender Mustang.  It's a good amp but seems to have to many glitches at the moment looking at the forums.  I'll give it one more go though if anyone has any suggestions to try.  Any ideas anyone ? Many thanks for reading.

Thanks for the responses.  I think it is a hardware issue though with the bluetooth just not working on the Amp.  It doesn't seem to matter what device I use the amplifier just isn't visible to anything ?

Hello!

!!! Ok, my bad. Figured it out. Had to put the amp in pairing more (Rev & Power) - then all is well. Sorry. !!!

(Feel dumb, bt I'll leave this in case someone else has similar issue.)

I had the amp successfully paird with a prior phone (Moto Droid as well - 2 yrs old?) Got a new phone - described above - Android v7. Not able to pair. Have uninstalled the Gateway app, (that got in the way last time, until the phone & amp were paired, then an install / connect went fine). This time... I get a cryptic, possibly IP6 number that looks like a device address. No code to enter, or anything to do. Phone says "Pairing..." waits maybe 10 seconds, then returns with "Pairing..." gone - no message, no nothing. Tried many many times. Cannot "forget the device" - phone doesn't offer a lot of choices: pair or disable Bluetooth is all...

Will the Code work with this phone? IS there a trick I hope I don't know? I sort of like the app - although I often use the knobs - it's just easier... So... I'm not going to hate you forever, but have to join the folks that are dissappointed with this. Amps are marvelous, but this software isn't measuring up I'm afraid.

Anyway, any help much appreciated!

Thanks

Steve

Hi Marshall 

I just bought a code 25, downloaded the app and tried to pair my amp to my phone which is a One Plus 3t.

However it doesn't pair like my Bose speaker, it only associates but nothing more, then in the app I can't manage to connect to the amp. Is my phone the problem? 

Can someone help me connect Gateway please

I bought a Code 25 for myself and my son. An older version of the app worked well but this latest udate is a complete joke ! I updated the firmware as well as the app a week ago and what a disaster!

I have spent hours and wasted energy trying to get the Gateway app and the CODE 25 to pair. I have followed every single piece of advice and  NOTHING works

For a company that makes quality products this has turned into a fricken disaster! There are so many complaints about the CODE 25 and 50 not pairing and it seesm that Marshall are doing diddly squat about sorting it out?? I am VERY pissed by the wasted time on this that I feel like throwing my CODE amp out the door into oncoming traffic!

Come on TEAM MARSHELL sort this problem out NOW... you are losing current customers and will lose future ones! 

PLEASE get back to us ASAP... it's becoming embarrasing for you!

I ask the same Question in some other Forum

https://www.musiker-board.de/threads/marshall-code-blootooth-problem.657279/#post-8205236

And there is Help.

My Rig:

Amp Firmware 1.3

Amp DSP 1.1

Amp Blootooth 3.1

Gateway Version 1.4.1

iPhone 5s iOS 10.2.1

Here is the Answer

The first time I connected to my new Code 50 via Bluetooth on my iPad and iPhone there were no issues (2 weeks ago). Went to connect today (2/17/17) and could not with either device. 

1. Went to settings and "forgot device".

2. Shutoff amp and devices, restarted amp and devices.

3. Back to settings, Bluetooth, and paired iPhone to amp. Showed as connected.

4. Opened Gateway changed home screen to amp and tapped to sync. NOTHING!

5. Opened Menu, Code, no amp detected, tapped scan for amps, NOTHING!

Definitely a problem with your Gateway App. Please correct and email me at Olhoss.jarvis@gmail.com when issue is corrected.

if you can't correct problem please forward me the shipping costs so I can return it. The app was the deciding factor for going with the Code 50.

I was able to connect only once. What am I doing wrong? Help!

When will there be a firmwear upgrade to correct the bluetooth connection problems ? I have followed all the instructions on the forum and still only occasionaly manage to get a connection before it disconnects or freezes at rehearsals which is very frustrating to say the least.

Using an Iphone 6s and the latest firmwear version with Code 25

Come on Marshall this is becoming a big issue