Questions
Showing results 41 to 60 of 169
0

votes

1

answer

902

views

Hi,

I just bought Stanmore 2, I can link it via Bluetooth to my iPhone 11 Pro just fine, but it just won't play anything. When I start playing any music in the iOS player, it just plays it via the iPhone speakers, not via Stanmore 2. I have tried "forgetting device", "manaully restarting" it by clicking the proper buttons as it says on your website. Even when I play music in the iOs player, the player in the Marshall app is empty and nothing is happening.

The only time it appeared to work was on my laptop, when both the speaker and laptop were muted and I moved the volume on Stanmore 2. The same however didn't work for either my PC or my iPhone. And both my PC and my laptop say that the speaker has "0 % battery". It wouldn't even firstly work on my laptop, only half an hour later.

So what the hell is going on? Do I have a faulty model? The speaker cost almost 350 USD, I wouldn't expect such problems. Could you please advise me what to do?

Thank you.

Best,

Jakub Doležal

asked 21 May 2020 at 06:42 PM

Jakub Doležal
0

votes

1

answer

434

views

I can't get the phone app and code 100 amp to connect. bluetooth does connect but the app will not show or allow to connect thus make the app unsuable. i have redownload app manty time. reconnected phone many times. amp is up to date firmware. i have had the app working fine and connected in the past.but now no matter how many redownloads, resets and starting fresh i can longer connect with the app to control it. i have been through every setting and all combinations on connecting updatig reseting and nothing seems to work. need help please. thank you.

asked 11 May 2020 at 03:31 PM

shawn isaac
1

vote

1

answer

579

views

Guys - 

You need to get someone to fix the Bluetooth capabilities with this product line, like, yesterday. I updated the firmware yesterday, which was extremely difficult to do in the first place, uninstalled / reinstalled the Gateway app today, and still cannot connect to the amp except via my phone's native Bluetooth options to use it as a speaker. I am running ios 13.3.1.

I've scoured your web site, I've watched your videos, I've been all over Google and Youtube, and I am nowhere. In addition, I'm legitimately concerned by other reviews that the amp is simply not going to sound as good given I've updated the firmware. Will post again if that's the case. 

I will see if I can push new presets to the amp via a hard connection to my PC, but you need to do serious damage control on this product line considering your leading selling point has proven to not work as intended, if at all. 

asked 16 Apr 2020 at 03:43 PM

Mike Hoye (1)
1

vote

0

answers

415

views

For all you that have issues connecting amp with Gateway app (even though it's connected to your phone already) clear out all of your old bluetooth pairings (headphones, portable speakers, etc..).   That worked for me after screwing around for 30 min.  

asked 13 Apr 2020 at 09:37 AM

indy jonz (2)
0

votes

2

answers

601

views

Hello

 

I bought Marshall Code25 this week and I have the same problem.

I am holding down the store button but after a few seconds I receive a
message "Cancelld" on the display and reset is not performed.
Can You help me how to prevent this problem?

Also does not work the playback from the cellphone via Gateway,

every attempt ends in disintegration of bluetooth connection

asked 19 Feb 2020 at 08:38 AM

Robert Fujas
0

votes

1

answer

488

views

I bought a new phone and now I can't connect to the presets on the amp.

I have a iPhone X.

I updated the firmware to 1.45

I've reinstalled the app, restarted the amp, etc etc

And yes I'm logged on to the amp and connected via Bluetooth in the phone.

I Just can't connect to the amp via the app, The app can't find the amp via the search function..

 

edited 17 Feb 2020 at 12:12 PM

Tommy Carlström

asked 17 Feb 2020 at 09:46 AM

Tommy Carlström
0

votes

1

answer

632

views

I just received a Marshall Code 25 as a gift and I am new to guitar playing and using an amp. So I have 2 questions actually.

1. In the User Presets section, what does the X over the amp (code not available) exactly mean?

2. I managed to connect the bluetooth on my iphone with the amp, and it works fine, but everytime I turn my amp and the app on my phone on, my amp doesn't show in the amp. So I end up having to sync the bluetooth every single time I turn it on, let it search for my amp, and then I can get started. Is there some reason why my amp doesn't stay in the app?

asked 12 Feb 2020 at 06:53 PM

Jose Roman
0

votes

1

answer

1.2k

views

I have received the following error on my iPad after an update of the IOS:

context 3D not available ! Possible reasons : wrong rendermode or missing device support 

 

I have uninstalled and reinstalled the app, disconnected the Bluetooth and reconnected, everything I can think of and nothing has gotten rid of the error message. Very frustrated. Thoughts?

Greg

asked 02 Feb 2020 at 01:26 AM

Gregory Aschoff
0

votes

1

answer

547

views

Hi, mi Stanmore is working great with my mobile device through bluetooth (once I downloaded the app) is there any chance to connect it to my macbook (of course I mean bluetooth too)? I cannot do it.

 

Thanks

edited 23 Jan 2020 at 06:36 PM

Héctor Camus

asked 23 Jan 2020 at 06:31 PM

Héctor Camus
0

votes

0

answers

458

views

I own the Marshall CODE 100H and CODE 212 cabinet.

I really love this amp, but I find the MY GATEWAY web page interface to be somewhat awkward to use.

The following are issues that I would like to see changed.

All references to the MY LIBRARY list are referring to the list below the MY GATEWAY List on the MY GATEWAY web page.

 

1) On the My GATEWAY web page, the preset list at the top is arranged by columns (as it should be), but the MY LIBRARY list below that is arranged by rows.

This makes it very awkward to find a preset in the MY LIBRARY section. 

The MY LIBRARY section should be arranged by columns as well.

 

2) There is no indication in the MY LIBRARY section on the MY GATEWAY tab whether a preset is or isn’t in the MY GATEWAY list.

This makes it awkward to know which presets from the MY LIBRARY are used in the MY GATEWAY

I would suggest adding the MY GATEWAY preset number to the MY LIBRARY list as the indicator.

 

3) There is no indication in either list whether a preset has been Modified or is a Factory Preset 

(must copy to MY LIBRARY section below and then edit to know if it was changed-not as convenient as it could be if it was marked as Factory Preset or Modified in the list)

 

4) There is no way to compare presets in the MY GATEWAY list vs the same named preset in the MY LIBRARY list.

(And a preset can be changed in the mobile app or on the amp and synced to the web, 

but the change doesn’t get applied to the same named preset in the MY LIBRARY list,

so the MY LIBRARY presets become inconsistent with the same named preset in MY GATEWAY. 

 

And, there’s no indication that the same named preset in the MY GATEWAY list is now different from the MY LIBRARY version.

Must be constantly manually checking / updating the MY LIBRARY list.

There should either be a “Date Changed” field in the Edit Preset dialog box so you can know which one is the most recent, or

There should be a prompt or checkbox to update the MY LIBRARY preset as well.

 

There should be a way to select two presets and then select “Compare”.

The compare screen should highlight the differences.

 

5) Renaming a preset in the MY GATEWAY section doesn’t also rename it in the MY LIBRARY.

Requires either deletion of the preset in the MY GATEWAY list and re-addition of the renamed preset,

or edit same named preset in both lists.  There should be a prompt or checkbox to update the MY LIBRARY preset as well.

 

6) Multiple presets can be named the same thing but have different configurations (really bad idea!)

This makes it hard to know which one is the most up to date.

This should be prohibited.

Copying a preset to the Library should pop up a warning message that a preset with that name already exists, and ask to replace or rename it differently.

 

7) Preset settings can only be  viewed / edited in the MY LIBRARY section but not the MY GATEWAY section.  

This means that you have to copy a preset from the MY GATEWAY list to the MY LIBRARY section first.

Then hunt down where it went in the MY LIBRARY list in order to edit it, Edit it, and then copy it back to the MY GATEWAY list. 

That seems to be a lot more awkward than it ought to be. It should be possible to view or edit preset settings from either list.

 

8) It would be nice if a preset could be marked as a favorite.

9) It would be nice if all Factory Presets had audio preview samples.

10) It would be useful to have a way to record a short audio sample via bluetooth on the mobile app and then be able to save it automatically to SoundCloud and add the url to the preset.

11) Where do I find backing tracks for to use with the amp?

asked 17 Jan 2020 at 04:09 AM

A. Todd Henker
0

votes

2

answers

569

views

I recently purchased a CODE 25 and love it. In the Gateway app I see a different list of presets when connected via Bluetooth versus not. Any suggestions of how to correct? 

When not connected I can see presets like Purple Plexi and Sweet Jubilee. Would like to check them out.

Thank you.

 

asked 13 Jan 2020 at 12:54 PM

Joe Niszczak
0

votes

1

answer

521

views

Dear Sirs,

I believe it's time to give answers for who brought a amp from Marshall Code series. There's several issues to connect it with the app Gateway. What shall we do? Deliver the amps because we were never informed that there are problem connecting via bluetooth? maybe that's the solution because i can read issues about this since the very beggining... 

asked 09 Jan 2020 at 07:33 PM

Pedro Fernandes
4

votes

8

answers

1.2k

views

Hi I have a CODE 100H head/cab and a CODE 100 combo both with the latest firmware re-installed from Marshall and both have this issue, i.e. the amp very oftenn completely freezes when I save a preset.

Steps to reproduce:

- Modify any patch on the front panel

- Save

- 50% of the times the amp seems to freeze. The preset is saved but you can no longer change preset and there is no sound coming out.

The same happens if you modify a patch from the iOS app via bluetooth and then save it from there.

 

It's REALLY frustrating and I can't believe I didn't find anything on this forum under the "crash on save" keywords. Seeing it happens on both of my CODE units it much be a software bug, I don't think it has anything to do with my units.

Anyone else has seen this problem?

 

Thanks!

asked 23 Dec 2019 at 11:45 PM

Lele X (14)
0

votes

1

answer

640

views

Hi my problem is the Marshall gateway app not connecting Bluetooth to my amp I've paired successfully to my iPad but it only sometime connects to the amp does not connect automatically very frustrating I've deleted app several time still the same problems do you have a update to help regards Rob 

asked 18 Nov 2019 at 01:14 PM

Robert Bruce
0

votes

2

answers

2.2k

views

Je n'arrive plus a faire reconnaître mon téléphone dans l'appli gateway Marshall

Le téléphone se connecte via bluetooth mais l'appli ne me donne pas accès au réglage / pas de connection

Je ne plus piloter mon ampli avec le téléphone alors que cela fonctionnait parfaitement auparavant.

J'ai fait une mise a jour de l ampli par USB 

Quelqu'un rencontré le même problème ?

Merci pour votre réponse.

Éric.

asked 11 Nov 2019 at 02:50 PM

JACKOWIAK Eric
0

votes

1

answer

513

views

I was having difficulty syncing my gateway app to my Marshall.com to add downloaded presets to my library. On the forums Marshal suggested doing a factory reset by holding the amp button down while restarting the amp. 
I did that. Now when I try to Bluetooth connect the gateway app and the amp I get this an error that says "connection rejected. You may only control amps you are already connected to for audio output". 
I have restarted the amp and phone but I keep getting the same error message. 

please advise on both this current problem as well as how to sync my gateway so that the downloaded presets get added to my gateway library. 

asked 09 Nov 2019 at 10:06 PM

jason donnelly
1

vote

1

answer

768

views

I have recently had my iphone 8 software updated to ios 13.1.2 and since then have not been able to control my Code 25 amp via Gateway from my phone even though, in iphone settings, I am connected via bluetooth but within the Gateway App I'm not. I have upgraded my Gateway App to version 1.5 back in July and up to now it's worked perfectly well. Is anyone else having this problem and if so  is there an App upgrade?

asked 12 Oct 2019 at 11:34 AM

Brian Delaney (1)
0

votes

0

answers

581

views

Here's the solution to pairing an iphone/ipad to CODE as of latest apple update. Stop blaming Marshall and learn to work your Apple device!!! Too many whiners complaining about problems that have everything to do with dumb Appple users!

1. settings>gateway app (find in list of apps)>turn on Bluetooth & other options you prefer

2. settings>bluetooth (make sure bluetooth is on), then pair CODE with device following the regular pairing instructions

3. APOLOGIZE to every person you bitched to and learn to work your amp and phone like a capable musician and not the babboon that you are!

asked 11 Oct 2019 at 10:53 PM

Mark Solis (2)
2

votes

3

answers

680

views

Hi,

My Code 25 cannot communicate with my phone via Marshall Gateway. The software cannot find and connect to the amplifier as if there was no bluetooth connectivity, but there is as I can listening to music via that. I use Galaxy A5 android.

Could you help me to solve the problem?

Thanks

Adam

asked 27 Sep 2019 at 09:23 PM

Adam Mokrzycki (2)
0

votes

0

answers

342

views

To make the most of my CODE50, this web site, and the iOS Gateway app, it is my understanding that I need to connect the CODE50 via a mini-USB cable, connect to the CODE50 in the bluetooth settings of my iPhone, and also connect to the CODE50 in the Gateway app on my iPhone.

When I take all the above steps, I can do everything I want, but I also hear unwanted system bells and whistles from my MacBook Pro and/or my iPhone. Can I do something to get/retain all the CODE50 functionality without the macOS/iOS system sounds? How exactly?

asked 26 Sep 2019 at 07:56 PM

Jim Marshall (12)
Showing results 41 to 60 of 169
Loading - please wait...