Hi
Can any one suggest what preset and adjustments to get a Tube Screamer sound from my code 50
Thanks in advance
I would like the intro guitar sound. Please let me know if you can tell me how to program it.
I would like the intro guitar sound. Please let me know if you can tell me how to program it.
I´m a beginner level and would like the preset settings for Nalle Colt from Vintage Trouble. Could anyone help me?
This is question about presets.
So there’s mymarshall presets and the app presets and then there’s the presets on my amp.
When I hookup my amp to the app all of the presets change to I guess updated presets that I did not program so I’m assuming they are just new presets from Marshall. Now there’s the iPhone icon and the amp icon. 99% sure they are all the same new updated presets. So how do I use the original ones that were on my amp and those? And do I have room to save the ones I download, without erasing the presets in the app or on my amp?
TL;DR why are there 2 different sets of presets when I connect the app and where do my original amp presets go / how do I use mymarshall presets without deleted presets
Is it possible to lower the volume in the presets without losing sound quality?
I noticed most of the presets on this website are reduntant/repetative and all I'm seeing is mostly Metallica and Pink Floyd with a bit of Marshall presets as well and some RHCP but mostly it's all classic rock genre and era styles.
I'm brand new to programing if you want to call it that and this is my first amp ever but I was expecting a crap load of variety from the users that have this amp. I'm trying to find some Weezer - Hash Pipe preset for anyone that can help and I know it just sounds like distortion but I literally suck at tring to get any sound and yes I am trying.
I noticed how it's not categorized ... is there somehow a better way to go about this?
Hi!
Can you advise please ? How can I configure two presets/chanels for one knob in the footswitches? I need to switch two presets with oneknob?
for example : Rhythm guitar to solo (different chanel with the addition of an effect through FX Loop) and back to the Rhythm mode?
I bought a new phone and now I can't connect to the presets on the amp.
I have a iPhone X.
I updated the firmware to 1.45
I've reinstalled the app, restarted the amp, etc etc
And yes I'm logged on to the amp and connected via Bluetooth in the phone.
I Just can't connect to the amp via the app, The app can't find the amp via the search function..
The Presets on my CODE 50 are different than what are on My Marshall site. I went to reset all Presets but it fails. If I try and Synch Now I get "Synch Failed".
The App works (as in I am connected and can change settings, controls are GOLD etc). But my Library on the app is completely different than what is on my computer.
Why is my Synch compeltely off?
I am trying to import patches from my Marshall Code 100 amp to Code Editor using a cable and even after reinstalling Code Editor it comes up with an error message "Error While Decoding System : Error_Bad_Device_ID" whenever I try and import a patch from my amp from selected patch number. This is despite the midi light being green, indicating connection with the amp. This is after not having used Code Editor for ages like 6 or 7 months or so. I am sure I had it working at some stage like 7 months ago or so. Is there any other software you can use to transfer patches from my amp to my pc and save them as a backup? And even modify them like you can in code editor and Gateway?
I just received a Marshall Code 25 as a gift and I am new to guitar playing and using an amp. So I have 2 questions actually.
1. In the User Presets section, what does the X over the amp (code not available) exactly mean?
2. I managed to connect the bluetooth on my iphone with the amp, and it works fine, but everytime I turn my amp and the app on my phone on, my amp doesn't show in the amp. So I end up having to sync the bluetooth every single time I turn it on, let it search for my amp, and then I can get started. Is there some reason why my amp doesn't stay in the app?
I want to be able to use an overdrive pedal, and is that best accomplished with a clean tone/no presets?
Hi I have a Marshall Code 100 and I often download patches of my fav artists from Marshallcode.tools. Firstly, let's get down to basics. Are "patches" the same as "presets"? It's really confusing as marshallcode.tools calls them patches but on this my.marshall site they are called "presets" but as far as I can see they are the same thing.
As there is only room for 100 presets on my amp, whenever I download a new patch from marshallcode.tools to my amp, I always make sure to copy the original preset that came with the amp that I am replacing, to my library as a backup, in case I want to reload them back onto the amp. When I click on the settings icon next to a preset in my gateway, it comes up with the option to "copy to library". It seems to take about 3 or 4 days for a preset to transfer to my library. Is "My Library" cloud based storage? 3 or 4 days seems like a long time for a preset, which are small files as far as I am aware, to copy to my library. I get concerned sometimes that it isn't copying over when I check the next day or even 2 days after copying it and I do not see it in my library, because immediately after I click copy to library, I can see it in my library, but it is black in background colour, rather than the olive green of all the other presets in my library. And then to check the next day and not see it anywhere in my library, regardless of colour, seems strange, like it has disappeared (but maybe it is just in transit?). They all eventually seem to arrive there, just seems strange that I cannot see it in my library in black background to indicate it is still uploading to my library cloud. So I am wondering if it usually takes a number of days to actually appear in my library and why it disappears from My Library during those few days of uploading?
Hi
I recently bought a Marshcall Code 50 and I have two old footswitches (a Behringer and a Boss Dual foot switch FS-6). All I want to be able to do is cycle between presets on the code. On both the footswitches the code only cycles backwards, and not forwards at all. Is there a setting on the code somewhere that I need to change so that I can cycle either way through the presets?
Much appreciated
I recently connected my code via usb....went to ACDC preset, downloaded to test it out...I liked it but didnt save it...now when I come back to save it nothing (any preset) will not transfer to my code....It reads CODE connected....Help please!!!
I own the Marshall CODE 100H and CODE 212 cabinet.
I really love this amp, but I find the MY GATEWAY web page interface to be somewhat awkward to use.
The following are issues that I would like to see changed.
All references to the MY LIBRARY list are referring to the list below the MY GATEWAY List on the MY GATEWAY web page.
1) On the My GATEWAY web page, the preset list at the top is arranged by columns (as it should be), but the MY LIBRARY list below that is arranged by rows.
This makes it very awkward to find a preset in the MY LIBRARY section.
The MY LIBRARY section should be arranged by columns as well.
2) There is no indication in the MY LIBRARY section on the MY GATEWAY tab whether a preset is or isn’t in the MY GATEWAY list.
This makes it awkward to know which presets from the MY LIBRARY are used in the MY GATEWAY
I would suggest adding the MY GATEWAY preset number to the MY LIBRARY list as the indicator.
3) There is no indication in either list whether a preset has been Modified or is a Factory Preset
(must copy to MY LIBRARY section below and then edit to know if it was changed-not as convenient as it could be if it was marked as Factory Preset or Modified in the list)
4) There is no way to compare presets in the MY GATEWAY list vs the same named preset in the MY LIBRARY list.
(And a preset can be changed in the mobile app or on the amp and synced to the web,
but the change doesn’t get applied to the same named preset in the MY LIBRARY list,
so the MY LIBRARY presets become inconsistent with the same named preset in MY GATEWAY.
And, there’s no indication that the same named preset in the MY GATEWAY list is now different from the MY LIBRARY version.
Must be constantly manually checking / updating the MY LIBRARY list.
There should either be a “Date Changed” field in the Edit Preset dialog box so you can know which one is the most recent, or
There should be a prompt or checkbox to update the MY LIBRARY preset as well.
There should be a way to select two presets and then select “Compare”.
The compare screen should highlight the differences.
5) Renaming a preset in the MY GATEWAY section doesn’t also rename it in the MY LIBRARY.
Requires either deletion of the preset in the MY GATEWAY list and re-addition of the renamed preset,
or edit same named preset in both lists. There should be a prompt or checkbox to update the MY LIBRARY preset as well.
6) Multiple presets can be named the same thing but have different configurations (really bad idea!)
This makes it hard to know which one is the most up to date.
This should be prohibited.
Copying a preset to the Library should pop up a warning message that a preset with that name already exists, and ask to replace or rename it differently.
7) Preset settings can only be viewed / edited in the MY LIBRARY section but not the MY GATEWAY section.
This means that you have to copy a preset from the MY GATEWAY list to the MY LIBRARY section first.
Then hunt down where it went in the MY LIBRARY list in order to edit it, Edit it, and then copy it back to the MY GATEWAY list.
That seems to be a lot more awkward than it ought to be. It should be possible to view or edit preset settings from either list.
8) It would be nice if a preset could be marked as a favorite.
9) It would be nice if all Factory Presets had audio preview samples.
10) It would be useful to have a way to record a short audio sample via bluetooth on the mobile app and then be able to save it automatically to SoundCloud and add the url to the preset.
11) Where do I find backing tracks for to use with the amp?
Hi,
I can't have a good sound when i'm using my RC Boss looper.
When I change preset, the sound of the looper, and especially the percussion, are inaudible.
Is there a way to keep the sound recorded normally?
For example if I record my loop in CLEAN, and then I switch to disto.
Thanx :)
