Trying to buy a Marshall branded dust cover for my SC20H Amp head.

Any idea who sells them? 

Have searched high and low without success.

Thank You

Hello,

I just bought a new Marshall DSL40CR last week, and when I have been playing on the low watt setting for about 30 mins, the volume drops in and out. I haven't experienced this on the high watt setting...yet. is there a recommended EQ or other setting configuration for the low watt setting to help with the issue of the volume dropping in and out? I have switched out cables, guitars, not using any effects or speaker cabinet either.

Thanks,

Ed

Hi, I'm wondering if anyone can point me in the right direction with this amp.  I genuinely love this amp, however it's had an issue since purchasing it second hand and clearly had a lot of repairs/bodges through its life.  Originally it would pop fuses so I changed the valves and set the bias and all was working apart from the serial FX loop.  I opened it back up and removed all the connections and then used the schematic to put them back.  I noticed that the serial loop was now working but the parallel loop wasn't so I assume one of the connections was the wrong way round originally.

I would love to get the parallel fx loop working again (even though I don't use it very often) but not sure where to look and what to change first.  I've replaced the sockets for both the serial and parallel loop with no change (serial loop works, parallel doesn't).  Is there any caps, resistors or diodes I should be looking to test or change and if so which ones?  Is anyone familiar with the schematics and can point me to the area I should be looking at to resolve this issue?  Thanks in advance.

Kind regards,

Rick.

Hi, could someone give the que how to reset Marshall monitor II ANC headphones. The way that Marshall's manual suggests doesn't work.

Thanks in advance!

I got a Marshall mg15fx couple weeks ago but my store button doesnt work. I dont know why. Can you help me?

Hi!
Just bought a Marshall emberton. I did connect the speaker to my iPhone (iOS 14.7.1). It starts playing but after 10 or 15 seconds it loses the connection and the bluetooth lighy on the speaker starts flashing.

Can you help me, please?

Thank you!

I borrowed a friend's mini USB cable a couple months ago to plug my CODE25 into my laptop and it worked just fine. I got a new cable today and tried plugging my amp into my laptop and the following notice popped up;

If anyone has any idea if it's a cable, laptop or amp issue, I'd appreciate the help. Thanks in advance.

Hello,    New amp I procured and I am hoping to get some Q's answered regarding. 

It did not come with a footswitch and being new to all of this I do not know why I need one or which footswitch to get ????

Also, I was told by the original owner that it is quite than it used to be and may need a new tube.   Also do not know which way to go with this ...   

Last point is when switching over from clean to overdrive it is buzzing and I am not sure why...

After hours on youtube and reading the instruction manual I am even more confused. 

Thanks in advance for comments/advice. 

Wade

I ordered a DSL40CR in January and it was amazing but in April it just stopped working. Sent it back to get fixed but it was deemed beyond repair and they sent a brand new one and it arrived in June. After a few weeks the new amps' volume would fluctuate after maybe 3-4 hours of playing. Got in touch with the shop I bought it from and described the problem, they said it was most likely the tubes so they sent two new ones. After replacing both tubes the volume still fluctuates after it's been played for a few hours.

Marshall#Emberton#Forest#1005944

Serical No:73400553E 10391 D0231890

Hello, I recently ordered a used JCM800 Model 1580 Bass Cabinet.  The seller's photos show it with one 18 inch Celestion G18Q-400 speaker.  I've learned that they were made in the 1980s-90s, and came in mutliple speaker configurations. Mine is the 1x18.  I'm assuming the cab originally came with the G18Q-400?

Would really love to know:

1. the performance specs of the G18Q speaker (Celestion.com didn't have any info)

2. whether the round port cut in the baffle of the cab is original. 

See picture below.  Thanks!

Hey, y'all!

 I just bought a used Lead 12 Combo (1987, I believe) which I am loving! but I'm experiencing an issue when listening through headphones which has me very confused.

If the 1/4" stereo TRS plug from the headphones (Shure SRH240) is fully inserted into the "H.P./Line Out" jack on the amp the internal speaker mutes but I only get audio from the right earphone. If I insert the plug only partway into the jack (to the first "detent") which seems to be a very popular suggestion online then I get sound from both left and right sides in the headphones but the internal speaker does not mute.

Any suggestions? And if it's an issue with the jack itself what kind of jack (Cliff? 6 prong? 4 prong? PCB or solder?) should I be looking for?

Any help MUCH appreciated, this is starting to make me crazy...thanks!

Is there a way to track a code 25 amp that was stolen from me

Hi, 

Am the pround owner of a Marshall Code 100 Combo, or rather, I used to be proud.

My problem is your bluertooth app.

It simply doesn't work.

I have installed on my Huawei phone (android) and  Nexus 7 tablet.

It used to work fine on both , now the app appears to be corrupted and the display is completed stuffed. ( yes I have uninstalled, rebooted and re-installed).

Also it doesn't recoginse my credentials. I means the program asks me to login (same  credentials as here), but there is no way to enter my details, no places to type my email addess etc.

Have you now stopped working on the Gateway app?

I need to know, as if you have, I'll be getting rid on the amp, as it's no good to me as it is.

Hello, I'm currently using fender lt50 with fender MGT4 footswitch. If I buy Marshall Code 50 will this footswitch work? Just for changing to channels from clean to distortion.. I found a solution in a Reddit video. And I download that video to my computer by using Reddit video downloader.

Hello, 

Well, I'm posting a question for which an answer has partly been answered in 2017 for someone else. 

I have a new CODE25 and it suddenly stops making sound. Though, it is still swithed on. I can change the preset etc. but still no sound. 

I just did the firmaware update. But I had again the issue. 

What would you suggest to do please? 

Kind regards, 

Thomas

HI,

   I recieved a Code 50 from the company that I work for(CAnon) as a reward for 30 years of service.  I have the usual problem where it freezes/hangs after a preset save.  How would I go about getting it repaired if I do no have a purchase receipt?

Thanks

Hello,

I've finally had time to sit down and play properly with my new Code 25.  There is a lot of fun to be had with this thing, however there are a few things that have became apparent with some of the models. 

Pre-amp models "50s British" and "OD DSL" have really odd low frequency harmonics. To the point where both these pre amp models are pretty much  unusable. The default patches that use these settings are proof of this. To me it appear that its these patches that certain Youtuber's concentrated on when bad mouthing the amp online (and I can understand why). All the models have some amounts of digital artifacts, but these 2 models are unbeleivably bad.

Power-amp model "British Class A" seems too hot to me, not that I have an expert ear, but it is almost impossible to get a clean tone with that power amp regardless of what pre-amp you put in front of it and how low you set the pre-amp gain. 
?
?
?

I understand that no modelling is perfect, but in general these 3 models just don't respond the same way as the other models on the amp.

OK. I'm aware that the Code 25 is a low cost practice amp, and I am fully prepared to just pretend these models dont exist and live with the other much better models on the amp. However in the spirit of reporting issues with the potential of improving the product then if these models can be fixed in the next firmware update (if there is one) then that would be great.

thanks

jackyjoy

hello, is the marshall origin's DI out socket TRS? Thanks

Hi,

I have a 1972 Super Bass head thats vitually immaculate having been in storage since new. Annoyingly the original owner sent it back to Marshalls to have the Lead / Bass switch fitted, no big deal, except now the amp is up for sale and all the American buyers want full documentation of this - Huh? Yeah, I'm sure Eddie van Halen kept all the paperwork for his amps in, in a handy box to light his cigarettes with - you get the picture!

Does Marshall keep records of works performed on amps? Its serial number is SB / A1593D

Thanks
Cat