Why are my 2 code amps still different after doing the update and reset? The newer 100 has different presets than my 50. Even afer the update. Are these amps different and will have different presets?

This is just the same question I asked before. I couldnt bump it up som that Marshall would see it and respond. 

Dear Marshall Support,

when I'm in MY LIBRARY and I'm moving preset up and down changing the sequence, do I have to save it every time I move a preset or I can do all the moving and save it once?

Thanks

Giuseppe

well, it seems quite odd connect the amp with the app.

I'm able to pair my amp correctly and play music through it but it is nearly impossible to connect within the app. I said 'almost' impossible because for a few times it happened.

I can't explain, sometimes the pair/unpair process or the remove/reinstall the app or both, but it's painful and annoying. It isn't properly plug & play. 

Also I tried to clear the bluetooth cache, the app cache, disabling wifi .... get out the dog..

Do something, please.

Massimo

Hi, I'm the only one facing issue using the MY LIBRARY web page to move and save PRESETS??!!

And what about the MY GATEWAY APP...it is really bad designed...please chang you SW Factory  Supplier  and release something usable...please.

Regards

Giuseppe

i was delivered my new code head and cab today but i had to send cab back as it was split across the top right hand join why is there no corner protectors ? i had to send cab back so can not use head until its replaced

i was delivered my new code head and cab today but i had to send cab back as it was split across the top right hand join why is there no corner protectors ? i had to send cab back so can not use head until its replaced

To: Team Marshall

Does the company have a plan to make the DIY plastic corner protectors for the Code100H and the Code4x12 cab? It would be nice to protect these babies too. I've bought a lot of different brand protectors inclusing the OEM Marshall ones but none of 'em fit right. Thanks!

before i downloaded the upgrades for my code 50, occaisionally it would go into silent mode when trying to save a preset, but changing the presets name mode was easily gotten to. Now that i have the download the saving/ silent mode bug is gone but it takes forever to get the changing the name mode...it either goes to save or scrolling letters....is there another upgrade for this or is this just a by product of the silent mode fix?

I need to replace my DSL 100 bias board as the PINS are really loose and I cannot get a good bias reading.

NO, its NOT thermal runaway, the mainboard was replaced a year ago. 
WHERE can I get a replacement bias board here in Australia ????

I‘ve a really crazy and unexpectable issue, with my new Code 100 Head, maybe someone knows what is going wrong?

The first head had an absolute  amazing virtual sound about a 12“ celestion box, but the headphone sound was extremly ugly, muddy and distorted.

The second amp is completely inverted, a super and really realistic headphone sound, but the box sound is not acceptable, like a walkman, silent ...

Has someone the same issue, that the Code 100 head cannot switch between the silent and loud mode? On both heads wins the first configuration and the other doesn‘t work.

Or, maybe someone has a trick, which Button, or menue flag I have to pick?

Thanks - Boris

Just wondering, to create a sound like the Cure i'll be needing probably chorus and phaser and/or flanger. Can these be done on the Code50 at the same time or do I buy a multi effect board?

The utility will download from the Marshall website, but when I try to run the setup program it will not install. Has anyone had this experience and if so, how did you resolve it ? I'm running Windows 10.

This is the message in the temp log. As I'm not an IT guy, I have no idea what it means

The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = HomeSite {string}
Property: [NTProductType] = 1 {int}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 10.0.0 {version}
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Read integer value 1
Setting value '1 {int}' for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Property: [DotNet35SP] = 1 {int}
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet35SP' and value '1': true
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Bypass'
'.NET Framework 3.5 SP1' RunCheck result: No Install Needed
Launching Application.
URLDownloadToCacheFile failed with HRESULT '-2146697208'
Error: An error occurred trying to download 'https://my.marshall.com/downloadfiles/firmware/MarshallFirmwareUpdateUtility.application'.

Does anyone have a System Of A Down Preset or the amps and cab’s he uses. Thank you 

Can the CODE 100H head handle a 16ohm load? I realize the wattage will not be a full 100watts, probably 80-85. 

Hi!

Has anyone used a Code with a great digital effects processor like zoom g5/g5n, boss gt 10/100 or line 6 pod hd 500? If so, how did you set your amp? I set the natural preamp, marshall 100w power and a 1960x cabinet but it didn't sound great.

Hi all.

I found out, that my Code25 has a small problem. When I play clean guitar and on my Code are all buttons turned off, I hear little bit distorted sound, when I play louder. The same behaviour occurs, when volume knob is on 0.1 and also on 10. Volume is louder on 10, ofcourse, but distorted sound is the same ...

I tried it compare to the same style of playing in my computer via my M-Audio sound card, but there is no problem - sound is clear (without distortion).

I compared it using headphones ... it's not a problem of speaker in Code25.

Can someone help me, how to fix this behaviour of Code?

Thank you,

Ales

Why am I seeing double presets on My Gateway? I did not have that before but now I see the same name of a few of my presets listed

Can 1.4.1 be updated thru Chrome? If so, where on this website do I find it?  I went to Support/Firmware update, it told me it was installing 1.3 something. WTF??

It's not like people have been waiting a year or more.....

Windows Downloader Utility will not install now....any tips?

i just bought a marshall class 5 first version with one piece back, read about an upgrade kit, kit-00111 is it stil available. regards Stig

When I got my 1923 85th celebration edition amp it came in a great travel type protection case, can these be purchased still as mine is a little battered ?