my code 25 is frozen, nothing is working. The display shows marshall - MCU: 1,47

Connection to the pc is working, update is starting, and then please wait restarting code.

Nothing more. The code 25 is not restarting. Power off and on is not the solution

What can I do?

Hi all,

I have a brand new Code 50 + Footswitch - got them today.  I have saved 3 of my own presets to Bank A 1 2 3.  No problem. Also assigned the tuner to a switch.  That was all fairly straightforward.  

However, I am unable to assign any other (new) presets to any of the other banks. When I follow the exact same process I used for Bank A - The footswitch just defaults to one of the amps, stock presets (all of which sound nasty).

I've watched the tutorials. At the moment, I have only 3 presets of my making on the switch and no, apparent way, of using any of the other banks.

Am I missing something obvious?

Cheers,

Mike

Can/should you write directly on the white strips above each switch on the PEDL-91016 6 button foot switch?

Comprei o Marshall Code 50 e sem nenhum motivo ele fica mudo quando está em uso.

O visor continua aceso, as funcionalidades todas funcionam, mas o som não sai.

Para voltar ao normal, é necessário reiniciar o aparelho, mas o problema volta a ocorrer logo em seguida.

Se eu utilizo ele com fone o problema não ocorre, se eu plugo o fone e tiro, o problema desaparece como se tivesse reiniciado, mas logo volta a ocorrer.

Gostaria de saber como proceder.

hy, i'm a proud owner of a jtm 1962 M-2006-19-0714-A 

year of production?

Watt RMS?

Thanks a lot.

I have a Marshall Code 25, and I am looking for a soft transport bag for it, can you please advise me of one?

Hey ya'll,

I have M1 Mac Mini (Also tried the same thing on my M1 Pro Macbook Pro), tried an update to the newest firmware. Didnt work from the first place, tried turning both my macs twice, didn't do anything further. (Tried every browsers - Chrome, Edge, Opera)

Now it says B0.7/M0.0/D1.2/READY and I'm just stuck with the amp that can't even produce sound because it can't do anything. Factory Reset with AMP - EXIT/STORE Method doesn't even try to respond. How do I go around it?

hello,

My amp is suddenly stopped working i update my farmeware to the latest version but it didnt help at all

Hello, I have a JVM410 100 watt combo with the 6-button footswitch.  I am seriously considering buying the marshall dsl20cr for smaller gigs, rehearsals and to have something lighter.  I know it comes with a 2-button footswitch.  My question is: will the 6 button footswitch work with the marshall dsl20cr?  I would like to be able to use the 6-button to have more control and switch between the gain stages of each channel, not just from one channel to another.   Thank you, 

Hi, does code 25 works with Tonebridge app on Android, connected by irig 2?

foot switch parou de funcionar do nada

Serial No of Emberton: 73400553E02991A003499

Need varification on this.

Thanks.

my code 25 is connect to the phone whit bluethoot, but nothing happens , the preset cannot be changed .......who can help me? 

hi

When I plug my multFX pedal to the Return of the amp the sound come out at MAX even with everything on Zero (Master, Volume and  Pedal Output).

Why? How to fix?

I was playing guitar and tried changing the volume on my amp and once I did the sound completely went out. I can't even play sound connected via Bluetooth on my phone. I don't hear sound either when I connect headphones to my amp. In addition to this, I connected my amp to my laptop and recorded some sound to try and figure out the problem, and GarageBand picked up what I was playing. This problem has happened to me in the past but after I wait for a little the sound seems to come back, but this time I've waited over a week and my amp still isn't working.  Any tips? 

When I switch off the amp there is always a crackle in the loudspeaker .

Is that normal or not ?

Thanks

I've brand new Code 50 with latest firmware (1.47).

From time to time, the speakers output turns off. I do have to poweroff OR activate bluetooth detection then exit button.

Clearly, this is a Bluetooh issue - and I need a way to turn it off while playing.

Actyally, I've bought the amp and the original pedal switch because I cannot use phone bluetooth while playing.

Please, this is a MAJOR issue, I really need your help on turning bluetooth off.

I've recently bought a new computer that only has USB C ports on it, and the CODE50 comes with the USB mini b to USB A cable, and I previously used this to record the amp sounds directly into Ableton and it would work just fine. To overcome this issue of not having the right USB I first used an adapter, but this revealed a new issue, that being a lot of latency and some fizzly sounds, leading me to believe the connectivity through the adapter was faulty. I bought a USB mini b to USB C cable to try to fix this issue, but it persits, and now when I try and connect my amp to my computer for anything, such as to see if there are updates or to try presets from the library, it seems that no connection is recognised at all. I was wondering if there were any drivers to install to help fix this issue, or if it was something else.

Hi,

After connecting my device to the speaker, the speaker plays sound normally and the volume increases/decreases as my device volume increases/decreases. However, if I set my device volume all the way to zero, the speaker is still playing sound. Tried to reconnect, but still not working. Is there a way to fix this? I would expect the speaker to be silent when the device volume set to zero.

Thanks!

I have an incomprehensible problem with the code, I try to connect to the combo via bluetooth connection, but the device is not displayed in the list of bluetooth devices, even after pressing REV + POWER the device is nowhere to be found (I checked on different smartphones) and throughout the whole time the code emits strange sounds of knocks from the speakers that are not solved in any way, I updated the firmware several times, this did not help in the end. Has anyone had the same problem, how did you solve it?