Serial No of Emberton: 73400553E02991A003499
Need varification on this.
I have Marshall Code 100 and it is ususable because the presets keep changing by themselves. Is anyone else facing this issue?
My Marshal-Emberton bluetooth speaker is having issue with sound. Speaker's conneted and charging, but unable to hear any sound.
amp powers on and presets all show up and change. sound just cut out! appears like petal display still changes buut no sound at all. jjust stopped in the middle of the song. ran a firm update and reset to factory...nothing
I bought a Marshall Studio Vintage Head in US where we have 110V voltage and 60Hz frequency. If I want to use that amp in Italy, where the voltage is 220V and 50Hz frequency, is it okay if I only change the currently mounted (US-rated) fuse? Or do I need to get a transformer? I am not sure if the amp is only rated for 110V / 60Hz...I like to think that it was built for a range of V and Hz that works for Italy / Europe as well, being made in UK.
If the fuse is the only mod I have to do, then I can just use a campatible power cord to plug it in?
Forgive my ignorance, and thanks in advance.
Can you please tell me which amps the PEDL-91003 is compatible with. I have heard it can be used with the DSL100H Is this the case?
hwo do I get music thru my amp/app/gateway ?
I'm restoring a couple Marshall speaker cabinets, maybe from the 90's. Two of the above speakers are not working.
hy, i'm a proud owner of a jtm 1962 M-2006-19-0714-A
year of production?
Thanks a lot.
After connecting my device to the speaker, the speaker plays sound normally and the volume increases/decreases as my device volume increases/decreases. However, if I set my device volume all the way to zero, the speaker is still playing sound. Tried to reconnect, but still not working. Is there a way to fix this? I would expect the speaker to be silent when the device volume set to zero.
I've just received my Code 25 amp today. It sounds good but I cannot pair it with my iPhone
It appears as "Headphones" in the bluetooth settings. When tapping on it, my iPhone says "Pairing failed "Headphones" is not supported".
I've tried with 4 different iPhones (all up-to-date) and got 4 times the same trouble
I've successfully updated the firmware of my amp (MCU 1.47 / BT: V3.2) but it did not fix the issue.
Can someone help ??
I just noticed that the Marshall Gateway app is no longer available in my AppStore (Sweden). Is this correct?
I have a Marshall Code 25, and I am looking for a soft transport bag for it, can you please advise me of one?
I have an incomprehensible problem with the code, I try to connect to the combo via bluetooth connection, but the device is not displayed in the list of bluetooth devices, even after pressing REV + POWER the device is nowhere to be found (I checked on different smartphones) and throughout the whole time the code emits strange sounds of knocks from the speakers that are not solved in any way, I updated the firmware several times, this did not help in the end. Has anyone had the same problem, how did you solve it?
I'm running the Firmware up date on my code 100 and it's stuck at the restarting in bootloader mode code please wait (1.5 hours). I tried canceling and now notice an electronic hum it never had.
Why boost pedal doesn't work at Marshall code 50? I have plugged the electric guitar into volume pedal and the volume pedal into guitar input on amp, but haven't had no boost effect! Will volume pedal work? I'd like to boost my solos, anyone faced this problem?
I am Jung Jin Sung who lives in Korea.
August to September 2022 Marshall Minor 3
I bought a product, but one earphone broke yesterday.
I bought it through the Amazon website on 11th Street in Korea.
I wonder what the procedure is about AS.
Is it acceptable/safe to connect the headphone/ line out socket of the Code 25 to a power amp input jack of another guitar amplifier, In my case, a peavey bandit 75, using a screened guitar lead. The peavey has a 1x12" 8 ohm speaker. I find the Peavey 12" speaker is alot warmer and fuller than the Code's 1x10" hence the question.
Thanks for any advice.
Here's an interesting thing. User Tomáš Nekovář, stole my Octafuzz preset and put it up as his own. Even complete with my Youtube link and soundcloud demo.
Seen it all now,
Oh well it was put up to share anyway, so enjoy MY patch everyone.
I just purchased a 1999 JCM2000 DSL 50 in mint condition . It worked for an hour great no issues.
Turned everything off and came back later to find the following:
Channel led lights do not light.
Pedals in the effects loop have no effect. Just had a Fortin Zuul in the loop.
Cannot change the channel with footswitch nor the front panel channel button.
I do get good signal out of the cab but am stuck on the lead channel.
All the tone stack controls work fine.
I can change between lead 1 and lead 2.
I have pulled the chassis and inspected fuses and all seem good.
Nothing looks burnt on the boards nor did I find any loose connections.
I removed all connections so only the cab was connected and have same issue.
Any suggestions before I take it?
I thought the effects loop would have still worked being I get signal out of the cab.
Very confused as I have never seen something like this before.