I have DSL 40 valve amp (about 2 years) and it has suddenly stopped giving any sound although power is on and valves seem to be on. Any ideas?
Thanks John
I have a Marshall Code 50 with the 4 way footswitch. I have learned how to activate the various effects in switch mode, but I haven't found a solid volume adjustment workaround. For instance, if I am playing rhythm and need to go lead, I can activate a switch and go to distortion, but the level isn't adequate to drive the sound to the right volume for a lead guitar. I have tried adjusting the "level", but it won't go over the master level on the preamp volume-wise. Is there a "volume pedal" like solution for this? I am not sure if I can run a volume pedal in sequence with the footswitch, has anyone tried this?
Our 11yr old son, Marshall, has an AVT150h head and 4x12 ... is there a refurbishment/customisation service available through the design store for used units?
Dear team, when I plug my headphones in the emulated out f my DSL5 CR I get a constant background noise/hum and the sound appear somehow distant. I use a Marshall Monitor headphone that work perefctly on other devices. Is there a way to fix this? Is this a nrmal feature?
Thanks for your kind help
Hi.
I've got a line6 spidervalve 212 that the DSP board went bad on, but the power amp is still good.
Any issues with connecting the line out of the Valvestate 8080 to the power amp in of the tube amp?
I can't seem to find any issues, but would love input on this.
Cheers,
Steve
I'm finding it hard to register my brand new Origin50C. Can't find the serial number it's covered by a sticker on the box. No where on the amp itself can I find the serial number
I need a parts list as the EQ Button has broken. Not sure if I can salvage this, but hopefully I can replace the switch
Hi,
when I connect CODE 25 to Centos 9 I get a mono device, qjackctl shows the amp as "CODE mono - capture_mono";
when I connect to Windows I get a stereo device (as expected).
Is there a way to make it work as a stereo device ?
Thanks in advance.
I would like to have some spare fuses for my studio amps -- I have the mini jubilee, studio classic, studio vintage and jtm studio. Can you provide the specs here so I can purchase.
thanks!
howie
Just bought a code 50 amp, when traying it I noticed suddenly strange noises, so I unppluged the cable to ckeck if it was a problem with it and then noticed that the jack broke inside the amp. What is the sugested procedure in these situation? Can I open the back of the amp to remove the tip of the jack?
Is new, I don't want to lose the warranty.
Can I use the Code 100H as a pre-amp connected to a TSL 100?
I got a M TSL 100W top with a bunch of Boss-pedals in a floor stomp board, including a stereo chorus and stereo delay (and the 5-way footswitch next to them). It would be nice if I could use the stereopedals in their fully potential, not in mono as I do today.
I got the money to buy another TSL and create a stereoset up, but will it work as I hope?
My thoughts/questions:
1. Do I need to have two (2) 5-way foot-switches (one each for each amp) to control both amps channels (I have looked at Voodoo labs-products but Iḿ notsure they would simplify this problem)
2. Today I have the stomp-pedals in a loop. Would this be possible also in the stereo situation?
Thanks in advance for any answer.
I would give some likes for the presets, but I am not able to like or give horns to a user preset? I tried different browser without any success.
Salut je recherche de très bon preset ou son Marshall , en effet j'ai acheté un Marshall code 50 cet année et j'en suis très heureux !
est ce que quelqu'un pourait m'aider, je suis plûtot pour le métal ou rock
merci !!
I'm looking for any and all info on a Marshall amp serial number SB/A3041F. Interested in year, model and anything else that comes up.
Thanks
Hi: Can you tell year of Manufacture. Speakers have codes that start with either D or E. One has a code EJ 18X seems odd comapred with the other 3.
Regards.
Jim McLaughlin
Is the 90012 compatibible with the DSL40CR?
Cheers
My Code 50 suddenly cuts out. . .like a lot of other people's!!! What are you doing about this!!! Don't tell me to just go talk to an engineer. . .it seems like a common problem with the Code 50. . .give me a specific way to fix it!!!!
Is it possible in Gateway to switch between Guv'nor, ODR and Distortion effects?
If so, what are the steps to change between these effects?
The registration link noted on the card which came with the product doesn't work. There are several people posting the same question but I do not see an answer. Someone please tell me how to register my new amp? Thank you.