Hello All,

What cable does someone use to hook up their ipad to a Code 50? it would a lightning to a ???

And why does one need a cable to  hook up to the Code? if the Code is synched via blutooth then anyhting on the APP, such as updates or presets, should also be able to get tot he Code via the blutooth and not need a cable. Could this be a glitch on Marshall's end or  they just never programmed it into the software to do it. Seems like an oversight, no? 

Thanks for any help anyone can give,

Lou

Hi, 

I have had my code 25 for about 6 months and for a while now, everytime I connect my phone and edit in the gateway app the preset freezes and I cannot change anything or change the preset. On the phone it says I am changing but there is no actual changes happening. On the little orange screen on the actual amp it stays on that preset even if I twist the knob to change preset but can still play and change volume.

TodayI was getting sick of it and looked up if there are updates for the amp and there are, which I then went and installed the latest firmware update. But now when I turn on the amp it shows that it's on and shows the preset but stays frozen and will not play sound at all. Is the amp done or can it be fixed?

Hello mates! I just bought the awesome Marshall Code 50. I'm just wondering how you can organize your own presets in a specific order (and in what presets should you store them all), so you may have for example your very own organized preset: Rhythm preset - Lead preset - Clean preset - Crunch preset. 

That being said, can you move factory presets to other spots to organize them at your convenience too?

Thank you mates!

WM♫

Hello,

I've had my code 25 for about a year and a half. After about 6 months sound from my amp speaker would stop after a few seconds after turning on the amp, however if I plug in the headphones it works fine through them, then if I pull out the headphones the speaker will sometimes work for a short while before stopping again.

After a few weeks of the sound not working, it will then start working fine for week or 2, before the sound stops again through the speaker.

It is not the cables or the guitar as I've tried multiple  on the same amp and they all work fine on my old amp, so I imagine it is a problem with the speaker/headphone socket?

Is there a simple fix for this or will it need to be returned under warranty? 

I try all suggestions in FAQ Support until "Last resort" But ..... nothing, I can't see the CONNECTED red button.

My code 50 is muted after a while
I need to hang up and wait a while to call
I'm from Brazil help me please

Hi all,

i try to make my code sound like that approximately :

https://youtu.be/xu74LK_p82g

but i don’t release this sound...

if someone can help me... please...

regards

Hi, I’m in New York and I wanted to buy a Marshall DSL 20C, but ANY store keeps one new, so I wanted to know if you recommend me to buy a code 50, a origin 20, a dsl40c or any other?

I wound up settling for a Code 50 because I searched the internet and several music shops, both in person and online, the only place I found the Code 100 was a shop in the UK. The Code 50 is great but I would have liked to have the Code 100.

After installing the latest Firmware update my Marhsall code 100 will not respond. The screen on the amp says USB not connected and I cannot do anything. I have tried a factory reset but that not working either. Help. 

Hello,

My footswitch stopped responding under the following scenario.

Marshall Code 50

Four button footswitch

Macbook pro connected via USB

Sound output set to Marshall Code

Playing Youtube videos through the amp and playing along

After a while, the footswitch stopped responding. I couldn't change banks or position within a bank.

Unplugging the USB cable seemed to get things going but footswitch stopped responding again shortly after.

Turning the amp off an on again resolved the issue.

I was wondering if the creator of the KASHMIR preset would be interested in also creating the FLANGER part for KASHMIR using all the current preset settings (amp, cabinet, speaker etc) as a complimentary preset for the turnaround section of the song.  I believe, from forums, that a preset will switch better (Marshall CODE footswitch) if the preset has the same amp, speaker and or cabinet setting as it takes away the millisecond delay of switching between amps in a particular preset.  Look forward to your answer and or creation of said beasty.

Regards Kev

Hey guys

I bought a Marshall Code 100H about a month ago. (The cabinet also)

Now what i ask myselfe is. I have a strange cracking sound when I play with the Bridge Pickup. This only happens when I play a distortioned sound. All the clean sounds are perfect. Bus as soon I activate a distortion pedal, or put the gain up, there is this strange cracking. It's like an oversteering of distortion.

I tried with different cables, resetting the amp, with headphones, other guitars and another loudspeaker, but it's always the same.

Since I live in switzerland and I had to buy the amp in germany, it's kind of difficult to go to the dealer, because he's four hours driving away from my home.

Or do I have too high expectations on this amp, and this is totaly normal?

I recorded a sample of it, but I don't know where to upload.

Many thanks for your help.

Rock On!!!

Hi,

Does the Code 15, 50, 100 have the same proccessing power ?

is there any difference in the hardware/software version ?

Thanks

D.

I want to know if the midi foot controller Berhringer FCB 1010 is compatible in Marshall Code.
thanks

It seems that all of us code owners has the same problem with the master volume, it's a double potentiometer vertically soldered to the board. I've measured my master vol pot, both pot vipers seems to miss contact from time to time when you turn the knob. So thats means to me a broken potentiometer. The surface inside the pot where the viper travels is partly broken. I noticed that the pot does not have anything to do with any software or firmware, so no firmware update will help here. So my question is where to buy a new master volume potentiometer for marshall code 50.  Best regards keep up the good work.

My Code 50 shuts off after a couple minutes.  I can turn it back on a couple times, then it wont turn back on.  If I let it sit an hour or so, then it will repeat this behaviour.

I have a code 100H. When using the headphones, the effects loop does not come through. If I connect an external cabinet it works fine. Why doesn't the FX come through in headphone mode? Thank you.

Hi,

if i use a clean preset of the marshall code 100H i got issues with crackling sounds. Even after turning it off and on. Its extremly annoying and it destroyes all that i record into my DAW. With this crackling sounds this Device is absolutly useless!! I've also updated to the latest Firmware version but nothing changed!

Please help!