Hi. Just verifying. Can I use The Behringer HA400 power headphone amplifier through the DI with the origin head without the cab attached or only into a mixing desk before removing the speaker ?
I’m just looking for best way to use headphones without the speaker attached .

thanks. 

P.s the origin amp is awesome. Love it. 

I was wondering what Marshall foot switch I could use and if it is still available?  If not, do you know of any aftermarker ones on the market?

Thanks

Hi, Do someone know if the "custom voiced" speakers on a CODE 4x12 8ohm cabinet are the same as in the mg412a cabinet ? The mg cab is loaded with celestion g12-412mg 8ohm speakers that look like celestion rocket 50 but seem to be rated at 30 watts ... because the cab is rated 120w... some AVT cabs are loaded with celestion g12-412avt and some with celestion rocket 50 but AVT cabs are 16ohm (maybe the cause of suffixes change on the g12..) I've browsed  the celestion website to find some answer and the only one that had the same magnet is the rocket 50 and is rated to 50 watts... i would like to know what kind of speakers are on the CODE cab and if the mg412a cabinet sounds about the same as the CODE 412 cab with a CODE 100h head ...i don't like the format of the CODE cab...but want to keep all the tone modeling capabilities of the CODE 100w head

My Amp came with a registration card and at the top "Register online at www.marshallusa.com/warranty".  This page does not exist nor does www.marshallusa.com.  What is the proper method for registering?    This sort of lessens the Marshall Experience,  Dont you think?

Is it recommended that the outside (tolex?) of this combo amp be cleaned periodically? If so, using what? Leather cleaner/conditioner? Armour All? Pledge? Something else?

Guys - 

You need to get someone to fix the Bluetooth capabilities with this product line, like, yesterday. I updated the firmware yesterday, which was extremely difficult to do in the first place, uninstalled / reinstalled the Gateway app today, and still cannot connect to the amp except via my phone's native Bluetooth options to use it as a speaker. I am running ios 13.3.1.

I've scoured your web site, I've watched your videos, I've been all over Google and Youtube, and I am nowhere. In addition, I'm legitimately concerned by other reviews that the amp is simply not going to sound as good given I've updated the firmware. Will post again if that's the case. 

I will see if I can push new presets to the amp via a hard connection to my PC, but you need to do serious damage control on this product line considering your leading selling point has proven to not work as intended, if at all. 

I have tried everything to do the firmware update on my new Code 25.  Its showing v1.11 still.

I have tried Crome, Edge, and downloading the manual windows exe.  I have updated drivers, booted amp in "safe mode" (which identified usb as READY but still wonnect connect in My.Marshall 

Please help!  I love the amp but need to be able to update the firmware

For all you that have issues connecting amp with Gateway app (even though it's connected to your phone already) clear out all of your old bluetooth pairings (headphones, portable speakers, etc..).   That worked for me after screwing around for 30 min.  

Hi all! I'm building a new pedalboard and was considering getting this footswitch... Anybody who has one, want to measure it for me?  Thanks!

Hi, guyz!

I wanna buy some good headphones for using with my Code, but I don't know the best suitable impedance. Didn't find some tech information in specs T_T.

I think, Beyerdynamic DT 770 will be a great choice, but 80 or 250 Ohm?

Hi.

At the beginning I want to point out that I am a beginner.

I have marshall code 25 and would like to connect a g3n zoom to it. Can anyone help me and describe what should be all settings on the amplifier to be clean. And the effect was from zoom. Should all knobs be screwed on? . As if someone were nice and described to me every setting I would change to, I would be grateful.

My new Code 50 is bad noisy out of the box. I have tried 3 cables, 2 diffrent Guitars. I have tried a diffrent Outlet. Nothing seems to stop the noise.

I can turn the preset to some that are quiter, but almost all have a noticiable amount of noise and or Buzzing sound.

I have tried Firmware upgrade, IT was the same version, so I reinstalled not luck.

Please help.

I was searching for lessons that I watched at Marshall Amps site in the 2000's.  I know it's awhile ago, but does anyone know if Online Lessons are available still?

Hi there..

purchased a code 100 head and 212 cab from a guy on ebay.. sadly there is a lot of feed coming from the loud speaker output, reading into this, it's been a bit of a problem for you.. 

Any idea when you lot are back from lockdown, so I can pop in to have it looked at...

Many thanks..

Simon 

Can i use  code 100H only with headphones , without the speaker connected?

many thanks in advance

Giampiero 

Hello, i have a problem connecting my acton 2 speaker to the laptop. I find it on the laptop, pair it with the speaker and it gives out a message that the speaker has 0% battery and doesnt play anything, even though the speaker is connected through power cable. The 3,5 jack works, but bluetooth doesn't.

I purchased a marshall code 100h from gear nuts and was ppurchased on june 3rd 2019. I contacted them for warranty or exchange they said it is out of there warranty time of 30days and to contact Marshall. What are the y steps I need to do I reside in U.S. zipe code is 43950. 

Why are some people being told that the DI out on a Origin 20 is balanced line level output? (Me for one) and yet other people are being told it is an unbalanced and I take it not line level output? 

I have spent quite a bit (for me not for Marshall) money on your products and am less than impressed with this aspect of aftercare.

would someone at Marshall's end sort this out please. I can't be the only one that feels let down and contemplating never buying Marshall again.

could someone please confirm what the DI out is (balanced/unbalanced, line level or not). Certainly if this had been pre-sales advice I be returning the product (and be entitled to), it's not what I expect from a well known and respected brand.

alistair

Si alguien podría ayudarme a cómo solucionar. intenté de muchas formas actualizar, desinstalar, etc pero no hay manera de reconocerlo, sí se genera el sonido al conectar el puerto USB pero inmediatamente sale que windows no lo a reconocido ERROR CODE 43 en windows 10.