While attempting to install the firmware update utility for my Code50, I continue to receive an error. Are there any current issues with the the utility? Perhaps the problem is on my end? Please advise. Thank you.
HOW CAN I DOWNLOAD THE FULL USER MANUAL FOR THE AMP AND FOOTSWITCH?
Any plans to release a Windows desktop app for managing presets via USB connection? I'm not an Android or iPhone user. Editing via amp panel is ok, but somewhat tedious.
Hello,
I experienced the following situation when testing my brand new CODE 50:
When I pressed the "SAVE" button for quick saving a preset, the CODE 50 completely "froze" and no sound was coming out of it...
Then, I turn off and on the unit and everything worked again with no problems.
This happened ONCE.
After this incident (some hours after), I reinstall the firmware and did a factory reset to the CODE.
After that, the issue has not happended again.
It really sounds as a software "bug".
Is that a known issue?
I am gently asking in order to see what to do.
Should I return the amp to the store I got it and ask for a replacement?
If the issue is software related, a replacement might not needed, since this may be fixed with a possible update...?
Thanks.
Denis
This seems to be a common problem with the code 50 and even the code 25? When i had my code 50 it would lockup with no sound from the amp when i edited and then tried to save a preset,i would have to shut off and then reboot the amp for it to work again,this happened about 3 out of 5 times when i used the amp?Check out the user reviews on musicians friend for the code 50,three reviews mention the same problem that i had with my code 50.
Marshall should look into this problem and try to fix it with a firmware update or find some other way to fix this problem?If marshall can fix it i would most likely buy this amp again.
I may be doing something wrong. However all the sittings ive tried all sounds muddy/ muffeled. I play alot of metal music and it just sounds a bit off. Could someone possinly help me?
is there any chance of adding to the website where you can find a specific sound setting. like one that sounds like judas priest and led zeppelin and many others rather than sit in front of the amp for hours trying to figure it out...thanks
I purchased a Marshall Code 25 Watt amp today, and I am trying to connect it to my phone (Samsung s6 Edge+) via bluetooth, however, my phone will not discover it when scanning for available bluetooth devices. I have reset my phone and cycled the amp, and the problem persists. Are there any known issues with these devices or any workaround that I should look into?
hi guys, had a code 50 for about a month now,, loving it now i got it set to my tastes, just wondering if the effects were modelled on any specific products or just generic delays and choruses etc. or are they models of boss pedals or others, im guessing the guv model is a guvnor, but what about the other distortions and od's? is there a list anywhere of this? thanks steve.
I am experiencing terrible interference when trying to use my Code 50 via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X. I am using a microphone to record the Code 50 and using the Bluetooth to change patches. The clicks/pops/noise/interference is loud enough to interfere with the recording process. Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues? I am running the most current Firmware. Any current solution to my noise issues? Thank you.
Hi, just bought a Code 25, I'm happy with the unit to a degree, but I have one niggling dought that I may have a faulty unit, it seems to be more noticable on certain guitars, when playing my Tokai strat, on the Bluesbreaker presets( 41,42,43), I get a horrible harch distortion ( as though its overloading the preamp, but ony around the 5 and 7th fret of the G and B strings) this also occours with headphones, if I back off the volume on the guitar it does reduce the distortion. Has anyone else noticed this?
I tried to instal the Code firmware update utility on my windows 10 PC, and my antivirus keeps blocking it from installing. My question is what is in the update, and is it worth downloading/updating?
I'm currently experiencing a problem where the amp locks up on a regular basis. When it happens, none of knob (gain/low/mid/high/volume) and button (pre FX/amp/mod/del/etc) settings take any effect: e.g I can set a mod effect, but the sound doesn't change.
The amp is paired with my iPad, but when this happens, the iPad is not connected and not even in range. It seems to be related to having the amp connected to my iMac via USB: after frequent cases of this happening, I unplugged the USB cable and the problem instantly went away.
Hello everyone. I was wondering if anyone knows when the Code 100 watt head is going to be available.
Thanks.
When will Marshall post a downloadable list of presets and settings for the CODE Series amps. It would make initial preset comparison, selection and change notation much easier.
Also, why are there are no "blank presets" available on the amp so that one does not need to overwrite a stock preset? Is it assumed that saving can be done to a tablet or phone?
My Samsung tablet pairs with my CODE 50 but Gateway app will not change the amp settings. It works properly with my Motorola smartphone. Both are Android.
Love my CODE 50, but can't use the gateway app to stream music. Can stream music fine through itunes by selecting the code as the playback device. I'd like to be able to use the gateway app to do this. Any suggestions?
REGISTRATIN ASK FOR MODEL WITH a,b,c ETC HOW DO i KNOW THE aLPHA CHARACTER IT IS NOT LISTED THAT I CAN FIND??
Hi, I recently bought a code 50,, but about 6 times now, while holding the save button to quick save a preset, after saving there is no sound from the amp, and I cannot change presets, or any other parameter. Turning the amp off ,then back on, and it starts working again. This is using the controls on the amp, not the gateway app. I checked the firmware about a week ago, and the program says I have the latest firmware.
Richard
I downloaded the windows program to upgrade my code50 to latest version...everytime i try to run the program it shows loading then disappears...nowhere on the screen...how do i use this to check for upgrades..im hoping that theres is a patch to fix the editing the preset names problem. seems when holding down the store button to get the left scroll if you hold it too long it goes to save...if not long enough nothing..sometimes you get it just right and get the left scroll screen.sometimes the amp locks up and it has to be turned off then on again to rebboot..and you have to redo..