I would like marshall to give us a program for the official PC in the style of Code Editor, since it has abandoned its development and support several years ago, so it has many bugs, so it would be a very good detail with all CODE users who Marshall made his own software for Windows 10 PCs and MacOS with which it was easier to manage patches, rename them, organize them, import them, export them etc. I hope they give us that.
I purchased an iPad 2020 and I can not find an adapter that works to plug into my CODE to add presets. Any thoughts?
I have a CODE 50 and can not find the right Top Gun Anthem tone settings. Can someone please advise?!?! Thank you in advance
I created several presets on my Code 50 and named them. When I log on to the site, however, my Gateway does not show these presets. It shows the original factory presets. How do I get my own presets backed up on to my Library and Gateway?
Is there a printable list of the factory supplied Code 100 preset (Amp Firmware 1.44, DSP 1.1, BT 3.1, Gateway 1.5.5)?
Thanks in advance for your help.
I love my Marshall Code 100w Head. I use it with my Marshall MX 2x12 cab...It sounds awesome!!! Here is my question? I was wondering if you guys will be coming out with the next edition of the Marshall code series.... maybe ( called something like the CODE-X ) .... If so... How long because it is hard to find a replacement for my current Marshall Code 100w Head in case something happens to it.... P.S. If you come out with the next edition could please add the Kerry King JCM-800 and the JCM-900 ??? PLEASE !!!!!! THANKS ALLEN PEREZ LEAD GUITARIST OF KINGSLAYER....
For a few days now, I have not been able to tune my guitar with my CODE 25. I manage to enter the TUNER menu but nothing happens when I crat a string. Have you ever had the problem? Do you have a suggestion to solve this problem?
Depuis quelques jours, je n'arrive plus à accorder ma guitare avec mon CODE 25. j'arrive à entrer dans le menu TUNER mais rien ne se passe quand je cratte une corde. Avez vous déjà eu le probleme? Avez vous une suggestion pour résoudre ce probleme?
So, my CODE 25's speaker doesn't work. The rest of the electronics turn on and work fine. I know it's getting signal because the tuner works. No issues with the display.
But there's no sound either from the speaker or the headphone jack. So, the signal isn't getting anywhere other than into the input port and as far as the top circuit board, I assume.
I note in the picture below that I took that the red and black wires aren't connected to anything on the board to the right. There also appears to be two empty connections. I wonder if they need to go on there and if I can safely do so myself. Any help appreciated.
Also, yes, the transformer isn't secured to anything. I found two loose screws inside that I assume are meant to secure it to the side of the cabinet.
Hello. I bought a Marshall Code 50 two months ago used. The first days it was working perfectly, but now, whenever I want to play some guitar with the amp, it stops sounding out of nowhere. I assume it has something to do with the headphone out, assuming that the HP OUT cuts the signal of the speaker. Has this happened to anyone else out here. If so, how did you guys solve this issue?
PS: The firmware is updated ;)
im a Marshall code 50 owner.
i was trying to record my guitar via USB using GarageBand, but it was not possible.
I setup the input as Code in GarageBand but doesn't work.
any suggestions? or maybe Code doesnt work with GarageBand?
can you recomend any interface (not an expensive one) to record my guitar?
I was playing today and my amp stopped working and from then the screen switch on and off all the time and no showing anything. It is not working at all. Does anyone know what could I do? Any support place to ask?
Is it possible to Connect my Code 100H to my computer or my audio interface without having a cabinett connected?
every company who sells digital amp made some upgrade with more amp or efx or cabinet or upgrade a better firmware with better tones. you do nothing! I've asked you - almost one year ago -, by mail, if marshall was programming an upgrade and in your mail you answered yes..I think was untrue, it's the worst support I've ever seen in digital amplification.
Hi guys just wondering if anyone has got a preset to play the above
cant seem to get the right sound on my Code 50
Cheers in advance
owned a code 25 for a while now but only really started using it during lockdown but have to say I'm really impressed. I'm just using it for living room playing and connected to my DAW as a way of laying down ideas but seriously, it's REALLY good.
For context, I've played guitar for 27 years and working in live music has been my primary source of income (pre lockdown....) for around 17 years. I'm usually a live-sound engineer and tour manager and occasionally fill in the gaps with some guitar-teching. I'm uk-based but have international clients, mostly guitar-based, playing mostly academy sized venues but have done major festivals worldwide and one short stint of an arena tour. The point here is not to blow my whistle, simply to say I've spent a lot of time being exposed to all manner of amps and modelling.
I own a line 6 helix and while the CODE isn't as flexible with regards to I/O, I genuinely feel like it's amp-modelling, especially for crunch, fuzzy or blown out tones, blows the Helix out of the water. Not that I'm as likely to use metal tones or had much cause to tweak them but I've noticed those kind of presets can sound a little thin. Also, higher gain sounds in general could benefit from a graphic EQ somewhere in the modelling chain, as it can be prone to squeak at frequencies usually outside of a regular amps range, presumably because of the full-range nature of the cab.
So, my query is, is there any chance that the CODE range is likely to get any substantial firmware updates or maybe 2nd generation hardware that could bring additional functionality/Pro level durability and a decent footswitch... I'm impressed that you've managed to get that much functionality out of a mono-jack but a few extra switches or even just midi connectivity for use with after market footswitched to access would open the amp right up.
Personally, I'd love to see one capable of more complex I/O routing i.e. the ability to record your dry input to DAW over usb and similarly, route from the DAW to the amp input for re-amping.
Midi I/O and an xlr input with phantom and a decent sounding pre would make it a nice little hub for a solo recording setup.
Anyway, great work Marshall/Softube, really hope you develop the line further.
Quick 4 part question: A) can I use the USB to get a line level signal into my PC that my digital interface will push to my powered monitors?
B) when using USB is the cabinet speaker muted?
C) must my DAW be open to make this work?
D) in this USB mode, can the CODE 100 be operated without speakers connected?
Can I use an extension cabinet such as the MG412 being there is an extension cabinet output on my Code 100C combo amp?
Ok Marshall we bought your product thinking it would be a good product. With trusted support. You have failed your customers and your products with no support for the code amps that your customers bought. And now most are stuck with a half working amp that they can't sell or not happy with. When will you get off your butts and fix the amps with a firmware update? And support the product and the consumers? Let us know so we can either stick it out or move on to another product.
I just bought a Marshall Code 50, it is new but I think it have a problem.
When I move command buttons (Gain, Bass, Middle & Volume) nothing happend.
When I move Trebble button it change Trebble and Volume in the same time.
Also, I saw that settings change without touch buttons when I'm playing guitare.
Could you tell me what I have to do for fixing this issue please ?
I tried to reinstall the firmware but it didn't fixed the issue.
Having constant issues trying to connect iPad to Code25 via Bluetooth. Sometimes it works , sometimes it doesn't.No consistent behavior. Yes I have made sure Code25 is latest version, yes I have updated IPad. Yes I have turned it off and on again (iPad and Code). I have not hit it with a hammer YET...Settings in Ipad says connected, Menu in Gateway App says not connected. Do search in Menu > Code is found> tap Code ID and says its connecting , Just a whirling wheel. Meanwhile IPad settings states connected. Extremely frustrated. Is there a solution to this or did I just get conned into buying something that doesn't do what it was sold to do. Help please............