I own the Marshall CODE 100H and CODE 212 cabinet.

I really love this amp, but I find the MY GATEWAY web page interface to be somewhat awkward to use.

The following are issues that I would like to see changed.

All references to the MY LIBRARY list are referring to the list below the MY GATEWAY List on the MY GATEWAY web page.

1) On the My GATEWAY web page, the preset list at the top is arranged by columns (as it should be), but the MY LIBRARY list below that is arranged by rows.

This makes it very awkward to find a preset in the MY LIBRARY section. 

The MY LIBRARY section should be arranged by columns as well.

2) There is no indication in the MY LIBRARY section on the MY GATEWAY tab whether a preset is or isn’t in the MY GATEWAY list.

This makes it awkward to know which presets from the MY LIBRARY are used in the MY GATEWAY

I would suggest adding the MY GATEWAY preset number to the MY LIBRARY list as the indicator.

3) There is no indication in either list whether a preset has been Modified or is a Factory Preset 

(must copy to MY LIBRARY section below and then edit to know if it was changed-not as convenient as it could be if it was marked as Factory Preset or Modified in the list)

4) There is no way to compare presets in the MY GATEWAY list vs the same named preset in the MY LIBRARY list.

(And a preset can be changed in the mobile app or on the amp and synced to the web, 

but the change doesn’t get applied to the same named preset in the MY LIBRARY list,

so the MY LIBRARY presets become inconsistent with the same named preset in MY GATEWAY. 

And, there’s no indication that the same named preset in the MY GATEWAY list is now different from the MY LIBRARY version.

Must be constantly manually checking / updating the MY LIBRARY list.

There should either be a “Date Changed” field in the Edit Preset dialog box so you can know which one is the most recent, or

There should be a prompt or checkbox to update the MY LIBRARY preset as well.

There should be a way to select two presets and then select “Compare”.

The compare screen should highlight the differences.

5) Renaming a preset in the MY GATEWAY section doesn’t also rename it in the MY LIBRARY.

Requires either deletion of the preset in the MY GATEWAY list and re-addition of the renamed preset,

or edit same named preset in both lists.  There should be a prompt or checkbox to update the MY LIBRARY preset as well.

6) Multiple presets can be named the same thing but have different configurations (really bad idea!)

This makes it hard to know which one is the most up to date.

This should be prohibited.

Copying a preset to the Library should pop up a warning message that a preset with that name already exists, and ask to replace or rename it differently.

7) Preset settings can only be  viewed / edited in the MY LIBRARY section but not the MY GATEWAY section.  

This means that you have to copy a preset from the MY GATEWAY list to the MY LIBRARY section first.

Then hunt down where it went in the MY LIBRARY list in order to edit it, Edit it, and then copy it back to the MY GATEWAY list. 

That seems to be a lot more awkward than it ought to be. It should be possible to view or edit preset settings from either list.

8) It would be nice if a preset could be marked as a favorite.

9) It would be nice if all Factory Presets had audio preview samples.

10) It would be useful to have a way to record a short audio sample via bluetooth on the mobile app and then be able to save it automatically to SoundCloud and add the url to the preset.

11) Where do I find backing tracks for to use with the amp?

I am using Stanmore II with various devices via BT and i have no issue except my laptop ( ideapad 100 ) which pairs normall as a BT audio device (at first two pairing it was showing me a message that stanmore II need to be plugged in cause battery is drained and as we know its always plugged in but ok the 3 time it connected properly) but its not playing music as it displays that need to be plugged in a jack .

Hi, How do I register my Marshall amp if I live in Canada?

Daar marshall .

I send you a  sound clip . By email.

Rob graber

Hi,

I can't have a good sound when i'm using my RC Boss looper.

When I change preset, the sound of the looper, and especially the percussion, are inaudible.
Is there a way to keep the sound recorded normally?
For example if I record my loop in CLEAN, and then I switch to disto.

Thanx :)

Cant pair my code 25 and all phones in the house on the android (sumsung a70, lenovo a1000, micromax q385, sony xperia xa2 plus and others).
In the bluetooth settings, phones do not display the device name but its mac addres: "С8:DF:84:26:58:1F".
When pairing some phones it asks for a PIN code, the rest are not connected. In any case does not connect. 

Looking for a great priest  preset. Thanks 

Looking for a great priest  preset. Thanks 

I get a new Code 50 this weekend and I'm very exited. Nevertheless, I have seen some posts regarding the Master Volume sensitivity  and I agree this is not nice. But there is a second issue with the Master Volume which concerns me more and I'm not sure if this "works as designed" or if this amp is simply defective:

When I turn the master poti I hear a kind of scratching noises. Additionally, the system/amp noise gets very loud the more I turn it up. I also noticed through headphones that there is only noise in one ear.

FW version is 1.11 and I know that I can upgrade but to newest version 1.4x - but I doubt this is an FW issue. 

Is this normal? Otherwise I will go for an exchange...

 PS: This seems a possible explanation to me - see https://my.marshall.com/forum/question/2544/master-volume-marshall-code-50?filterType=recent

I recently purchased a CODE 25 and love it. In the Gateway app I see a different list of presets when connected via Bluetooth versus not. Any suggestions of how to correct? 

When not connected I can see presets like Purple Plexi and Sweet Jubilee. Would like to check them out.

Thank you.

Hey everyone, 

So I've had my dsl 40c for awhile now and I absolutely love it.  However, One small issue came up awhile and i could use some help tracking down the right part. A couple weeks ago one of the fuses blew in the amp head, and after going to severa music stores,  hardware stores, home depot,  even automotive stores, i cannot find the right exact fuse for the amp. They're all 500ma, which are pretty common, but if you get one from a hardware store it just blows again immediately, because as I've noticed, the fuses that came in the amp have a thicker wire than anything I can find. Even having trouble locating the right ones online and there is absolutely NOTHING in the way of fuses on sweetwater, if anyone has any idea on how I can track down the right fuse, it would be greatly appreciated! 

Looking at purchasing an ‘89 2205 head this week but not sure if it comes with footswitch. Please can anyone advise which model of footswitch is compatible with this amp? 

I want to use two 1936 cabs with my JVM410H. Just wanted to make sure i understand the connection. Should i be using the 1x4 and 2x8 jacks on the amp, to use both 1936 cabs (both cabs are 8 ohm)? (Left two connections when staring at back panel)

Hi,

I just bought a Marshall Code25 amp.  The warranty registration card gives www.marshallusa.com/warranty as the registration site but it is not accessible. Is there another one?

Dear Sirs,

I believe it's time to give answers for who brought a amp from Marshall Code series. There's several issues to connect it with the app Gateway. What shall we do? Deliver the amps because we were never informed that there are problem connecting via bluetooth? maybe that's the solution because i can read issues about this since the very beggining... 

Hola. Puedo enlazar mi celular xiaomi redmi note 4 con el amplificador code50 y reproducir música desde mi celular. Pero no puedo enlazarlo desde la aplicación porque no me muestra ninguna opción del amplificador cuando voy al menú de la aplicación. 

Ya borre el caché y también la instalación nuevamente a la aplicación pero tengo el mismo problema. 

I recently got a Marshall  CODE 100 and I also recently got a Scarlett 2i2 recording interface. Before my CODE 100, I have been recording my guitar by going straight into the interface and using Pro Tools First. That worked fine. I even have been able to use pedals with my guitar and put that right into the interface. However, I want to be able to tweak my tone via the CODE 100 and still use my Scarlett and Pro Tools First. How do I do this? I do not see a line out on the CODE 100 head (I have a head and a Marshall 2x12 cab).

I am scared to really try because I am seeing mixed comments online. Some are saying it's very dangerous to go straight from the head to the computer via USB WITHOUT having it plugged into the cab because it could blow up the head? Some are telling me the only way to do it is it order a 1/8" to 1/4" cable and monoline it out and straight into the Scarlett interface from the headphone jack?

I cannot find a clear answer to these questions. Please, someone, help me. 

Hello,

Can you run a JVM Combo amp in to a reactive load box and then in to a Audio Interface connteted to a DAW? Would you be in standby when doing so or standby off?

Dear marshall.

After software update i have a klik in master volume. When sound is louder the klik also .can you help  .can i put back the software update . Do hou have any idee . Ron graber 

I have followed all of your steps and while my Code 100 pairs to my device, when I open the Marshall Gateway it never shows the code connected, nor does it give me the option inside the app to connect. I have uninstalled and unpaired multiple times with the same result.