Hello folks,
I´m looking for the building date of my DSL40C. Not sure to understand the label code right. Here are my Labelnumbers V01061659E and also 12-16 on the right side of label. I hope someone could help. thx and greetings from germany, Benno
Bonjour
Quelqu'un aurait il la notice détaillée du DSL 5 CR s'il vous plaît?
Merci d'avance
Hello! Do you have any idea where I could find a fitting button to replace a missing one?
Hello,
I got my DSL40CR brand new in November. I love how it sounds, but it has an annoying and random issue. Whenever I've been playing my amp for an extended period, about 30 minutes or so, it starts to hiss and buzz. It starts quietly at first, but in the next few seconds, it gets louder and louder until it's ear-shatteringly loud. The only way to fix it is by shutting it off and waiting a few minutes, and then the cycle will repeat in an indeterminate amount of time. Turning it on standby mode does not fix it; shutting it off then immediately back on also maintains the noise. The only way is to wait a few minutes. This problem solely depends on how long the amp is on, as playing or not playing the instrument for the full period will result in the same problem.
What is the issue? And how could I get it fixed/fix it myself?
Just got a DSL 20c. When I plug the headphones into the emulator jack and put the amp on STB i don't get any output. what am I doing wrong?
hello,
i own 2 DSL 40 amps, 16 ohms each, but one has three loudspeaker options: (8 ohm) - (8 ohm) - (16 ohm)
the other one has more options, (16 ohm) - (1 x 8 ohm) or (2 x 16 ohm) - (1 x 4 ohm) or (2 x 8 ohm)
I want to use one amp as an extension cabinet for the other one, and also as a spare amp,
how do i proceed with the connections ? the spare amp needs to be turned on ? will it work as an extension cabinet if not turned on ?
thank you
I bought a dsl 40crc from guitar center around 8 months ago. bought the 6 way footswitch. footswitch decided to only work on standby if it does come on while on either high watt or low watts turned on if I switch it it goes dead but if I swith amp to stand by it starts working again.? any answers to why this may be happening?
I have a DSL 100 And a DSL 100H , will the footswitch for the 100 work with the 100H or do I have an issue because mine is not working in the H ?
I have DSL 40 valve amp (about 2 years) and it has suddenly stopped giving any sound although power is on and valves seem to be on. Any ideas?
Thanks John
After multiple fuse replacements. The dreaded turn the amp on and it started smoking. I was absolutely and critically aware of fuse values and took every opportunity to make triple sure the exact value and replacement was done surgically and with exacting integrity with regards to fuse ratings values and type. ie slow burn and so on... I am in Florida and there's no actual service center within 60 to 80 miles of my location. Although many attempts to find one that actually does warranty work is a joke. The only actual people that I could find that said ship it to us are in California and the cost is ridiculous as I bought this brand new from American music supply who was of no help until Marshall's warranty runs out after 5 years. Then they'd be able to help me with their golden warranty after the manufacturer warranty expires. What good is that? So I wait 5 years to get something done? I have an 1100 dollar brand new looking paper weight. Needless to say I am frustrated beyond the scope of sanity as I build custom guitars and rely quite heavily on this as a sonic litmus tester. I purchased the Yamaha thr2 30 watt to try and use in the mean time but it doesn't give me an authentic profile sonically. So out another 600$ .4 of the big black caps have sprayed some type of black chared chaff directionally from pinholes that are visible from removing the head from the cab. This is insane to me that a now year and a half old paper weight now adorns my studio and I can't even find support after logging in to my profile through Marshall. Is this the way marshall is now? What can I do to get in touch with someone who can actually help me without me ponying up a considerable chunk of change for a new amp that is handled with kit gloves. Sorry for the novel and the negativity. I just feel abandoned and taken to the cleaners. If I can't get some support from marshall I'll be forced to do a YouTube video about this experience with factual references that show how insane this truly is. Please help Justin
Hi, after a few long hours of use, turned on my DSL40CR and the sound faded away and now has a faint sound even cranked. Plugged in the the effects loop return and sounds fine so the issue is in the pream section. It's not q tube as o installed a fresh set to check and still the same issue. Any ideas what could have happened?
Hi, I had a marshall code, dsl 1w, 15w and 40w. I liked of 1w, much loud! I sold all and I have been used a app amplitube with iphone and ipad + irig nano amp, but I figure out in the worst way about update versions, It just stops working after the update. A nice day, and you cant play anymore on analogic gear.
Now Id like a all in gear and the better for me now its the Code 25. Even without the app I can handle the amp manually. Although, be convenient.
Whats the current version suportted for code today? My IPAD 9th is 16.5, IPHONE 7 is 13. Is it works?
thanks.
I just purchased a 1999 JCM2000 DSL 50 in mint condition . It worked for an hour great no issues.
Turned everything off and came back later to find the following:
Channel led lights do not light.
Pedals in the effects loop have no effect. Just had a Fortin Zuul in the loop.
Cannot change the channel with footswitch nor the front panel channel button.
I do get good signal out of the cab but am stuck on the lead channel.
All the tone stack controls work fine.
I can change between lead 1 and lead 2.
I have pulled the chassis and inspected fuses and all seem good.
Nothing looks burnt on the boards nor did I find any loose connections.
I removed all connections so only the cab was connected and have same issue.
Any suggestions before I take it?
I thought the effects loop would have still worked being I get signal out of the cab.
Very confused as I have never seen something like this before.
When I switch off the amp there is always a crackle in the loudspeaker .
Is that normal or not ?
Thanks
Hello,
When I switch off the amp there is always a crackle in the loudspeaker .
Is taht normal or not ?
Thank you for the response.
Kind regards
Claude
On the DSL 100HR, made in 2022 ... where are the fuses located? On the DSL2000 100 head 2 on the back? Just wondering? Thanks!
I have a DSL20H, a DSL40CR and now a marvelous new SC20H. I have a TC electronics Nova pedal which i use in the effects loops of the two DSL amps. When i plug it into the SC20H there is an audible hissy noise which is not there on either DSL amps. Is the effects model fundamentally different between the SC20H and the DSL amps ? Should i expect the SC20H to have a noiser effects loop ?
I have a DSL H and two 1936 Cabinets. What is the proper way to hook these cabinets up to my amplifier
Hey Team!
Own three Marshall JCM 2000 DSL, two are pre 2004 and at least one of them seems to have the Bias Drift issue. Where can I get hold of a replacement main board? I'm based in Germany.
Cheers
Chris
Hi together,
in Oct. 2020 (2 years ago), I bought an new DSL 40 CR. After 10 months (I used the amp only at home) the amp was suddenly quiet. My dealer sent the amp to Marshall and it takes more than 2 months to get the repaired amp back. Now in July 2022 the amp was once again quiet and this time it takes more than 3 months(!) to get the amp back.
After 2 repairs inside the warranty period I have no more trust in Marshall and I want to know, what was wrong with this amp. How can I get informations about the repair? My dealer got no information from Marshall.
Can anybody help me? Is there an warranty repair center?
Thanks in advance!