I see that you are making a 6 button pedal for the new DSL40CR amps. Do you make a similar, more functional pedal for the 2018 DSL40C? I would like to be able to switch modes for each channel. Thank you

Still waiting for my answer about which casters or wheels, I can't believe you didn't know that the 2x12 extension cabinet that is made for your CODE 100H that I bought from you, comes with heavy black plastic fittings with threads, four on the bottom. I would think that they are pretty common..........I appreciate your time, honestly.......thanks...D.Wells

I have 2 DSL15H Amp Heads and I love them but one of them has recently started making a static type sound when powered even when there is nothing on the input. Any ideas to how to fix this would be much appreciated.

Hi I have just bought myself a guitar and the Marshall code 50 amp however as a beginner I am very confused about all the different names and what type of amps they actually represent is there anyway to find this out and to make it more understandable for a beginner

If I purcase the marshall code footswitch and plug it into the f/c input on my code 50 do I connect  the looper and the drum  machine into  plugged into the input on the left.  Would this stop the drums from getting the effects on the effects on the guitar

Hello 👋,

I just bought 2 Marshall CODE25 amplifiers, hoping I would be able to connect them through bluetooth together or atleast by wire. I don’t know how to, or if it’s even possible. I want to use the amps as speakers too so an ABY pedal doesn’t really help. I tried to connect them by MP3 to Headphone ports via 3.5mm jack, but the amp originally playing music stops and sound comes only through the second one, but louder than normal. I want both of them to play at the same time. Please help! Thanks! 😃 

Can anyone tell me which casters to get for my 2x12 extension cabinet I use with my code 100 H, thanks.

I don't know how to use the playback tab on the gateway app .

Could you help me please ? 

I'm using USB on my Mac and the Mac sees the Code and allows me to set the speaker to it.
When I pull up a Youtube video and start it the video will play for about 5 seconds and then halts.
It's almost like something else is intercepting it. It basically locks up and I have to close the browser.

Same issue when using the Code 25 as input device on Mac for Garage Band. It recognizes it but when I record
upon playback the sounds are scratchy and unusable

This Code 25 works on my Windows Machine both ways as Input and Output device flawlessly

I have installed the latest firmware so that is not the issue.

Any ideas on what it might be causing the problem on the Mac?

--Pat Brown

I really need the above to repair my Marshall MG30CFX  guitar amp. Can the forumers point me to the right place to download it?

Or is the numbering of the presets ... haphazard?

Hello.I have a big problem with my amp.When I increase the volume level,from my cabinet sometimes come out very loud and terrible sound.It is just like the amp will blow my cabinet 2x12 120W.Ultra gain section - Volume at 5 and more,Gain at 5).Is this bad tube,or something problem with amp?Sorry for my english!

Hi, I have a question about the Studio Series SV20H and SC20H DI OUT

The user manual say the DI OUT have emulation, but in both of your official product video on youtube (for SC20H and SV20H), Steve say the DI OUT is NOT emulated so it's perfect to use with our own Impulse response...

So who is right, the user manual or Marshall official product video?

https://www.youtube.com/watch?v=GvuQPnqMktc   at 2min43 he talk about the DI OUT and he say same for the video for the SC20H

Thanks in advance!

Stephane

bonjour, j' ai une tete marshall code 100 et je voudrais m enregistrer maisje suis nul en informatique. j' ai relié ma tete marshall à mon pc en USB, mais ensuite, que faire ?  Je dois télécharger un logiciel DAW ? ( gratuit si possible ), et après, quelles manoeuvres à faire ?

Si quelqu un peut m aider ce serai génial, des explications simples et très précises svp...Merci d' avance.

I'm a beginner. I've experiemented with all the presets of my CODE50. It's an amazing amp/speaker combo. However, I would like to have a better understanding of what the switch and 4 knobs do on my Epiphone Les Paul, apart from all the amazing things that the CODE50 can do. This would seem to require that I set the CODE50 to work as a "pure amplifier," solely increasing the volume of the guitar output, without adding any effects to modify/model its output. Can I achieve this by doing the following using the iPhone app?

Turn to Pedal 1 preset (and not use a pedal)

Keep Pre-Amp at Natural

Turn Power-Amp and Cabinet off

Turn all FX off

Anything else?

I  eed. To know what order would I place my effects peddles so I can play a clean loop and then put a distorted loop over it.

Hello,

I just completed a tour and on the last night, mid-set, my Code 50 suddenly turned off and wouldn't turn on again.

Got it home and I still won't turn on. No lights, no nothing.

Anyone else had this problem?

It was totally fine and really sounded great for the whole UK tour and then  the whole Europe tour, apart from the last show.

Any thoughts much appreciated.

Cheers,

Toby (Art Brut)

Is it possible to put a loop function on footswitch in a firmware update? I know I could buy a looper pedal, but I bought a digital modeller so I didn't have to go down that road.

looking for model of footswitch for JCM2000 DSL

Last update 10th Oct 2017 v1.41 surely there has been something to update Marshall Team such as bug fixes and new presets since 18 months ago, or have you just forgotten us after having all our well earned money!