Hi guys i have a Code 50 Amp and footswitch. i have recently started to having a problem. when i am on a patch and hold in the Selector on the Switch for instance if i am in Bank B3 and hold down the B3 switch, you enter a mode which you switch off FX, Delay and reverb. i have notiched that when i go into any bank like that and want to go back out to choose another patch my amp buttons and knobs & footswitch is non responsive and i have to switch the amp on and off for it to respond again, this is very anyoing. any feedback on what the problem might be

Hi guys

i am wondering if someone perhaps have settings for a great clean tone for my fender telecaster. i will be running a pedal board so im wondering if someone has find that perfect clean tone setting.

Hello,

I recently bought a Marshall Code 50 and I am very happy it. But there is one thing that is annoying. Sometimes the display doesn't show any text at all when I turn the amp on . Also when I turn the amp  on there is a loud pop noise but the noise only appears when the display shows text.

Any help would be appreciated. 

Thanks

Hello,
I just bought on ebay a 70's 2x12 Marshall Cabinet that I'm trying to identify the exact model on the internet but without success.. can you please help me? Using the speaker codes, I realized that is from 1977, but that's it...
Please see the attached photos ;) I'm sure that will be easy for you ;)
Thanks in advanced!

Hi!

I'm new in the marshall world and don't have any experience in speakers but I recently have bought a Marshall Acton Bluetooth, but the speaker when turned on and no sound have a static noise (like zzzzzz something like that) and even when I put some sound the noise continues but I only can detect if I put my ear in the speaker. 

It's that normal? I'm asking because I have the speaker connected with my Amazon Echo Dot and I want that they stay always on and I don't want that static noise...

Regards.

After looking through patches here, cannot seem to find any straight up good 5150 style sounds. I figure it would start with American OD preamp, but the Jubilee seems like a good option too. Any help would be appreciated,  thanks!

I was dicking about with tones, as you do, and when I meant to save my custom tone to my footswitch, and accidentally saved DSL Clean Chorus to #11 on the amp, Some Dely For You Too. This preset just happened to be one of my favorites. Is there anything I can do about it?

I was dicking about with tones, as you do, and when I meant to save my custom tone to my footswitch, and accidentally saved DSL Clean Chorus to #11 on the amp, Some Dely For You Too. This preset just happened to be one of my favorites. Is there anything I can do about it?

I'm able to pair my iphone with code 25 amp. But when I get into the gateway app in my phone, the connect button doesn't show up. I try to connect the amplifier through "menu" -> "Code", but no amp shows up. Please let me know how I can fix the issue

Thanks in advance

I have the JTM 1H offset. The tone control has no effect on the sound. I tried different volume levels. I tried different cabinets. I also changed the tubes. any advice?

I see that the Bluetooth issue I am experiencing has been going on for some time now. I just bought this amp but I wouldn't have had I known how frustrtating it was going to turn out!

The whole appeal of this amp was that I could sit back with my phone or ipad and diddle with the settings peacfully. But no, you can't do that becasue first  you have to pair the amp and phone/ipad EVERYTIME you want to use the gateway app. 

Come on guys, really this is ridiculous. How many other people are complaing about this very issue. You can't sell a half baked product and not fix it. At very least allow us to roll back to the previous firmware. 

i want to know if there is a way to use a second cabinet with my 100h head and 4X12 cabinet so i can have a full stack vs. a half stack?

Hi everyone . I’m very new to amps, always played acoustic . I just recently bought the Marshal Code 25 . I printed off the operating manual . My question is I have a iPhone, iPad and a laptop . I want to play backing tracks through my amp so I can practice . I’m confused on how to connect to the amp . Do I need a special cable, and is the cable going to be a different one if I use my laptop ? And on the amp where is the best connection to use , I’m aware of the headphones plug guitar plug , which is best to play backing tracks through . Thanks very much .

Podre conseguir la tela de mi pantalla pues un pequeño roedor la daño ? yen donde ? Saludos.

I tried play song called Cirice by Ghost but I can't set my amp. someone have set which make similar sound like on this video??

 https://youtu.be/KOrXKiSy8ZY

I was just playing my Epi on the Acoustic setting and all sound went out and the screen and buttons started flashing. Tried pluggin/unplugging. Pluggin into a different outlet. What the hell just happened?

https://www.youtube.com/watch?v=_l54NTu-p0s

Why would my amp switch channels on its own? The footswitch is not being used. I manually switch the channels when jamming alone. I play my clean settings and it switches over to ultra gain and cannot switch back. I have to turn the amp off in order to switch and then it switches again.

Have any of you CODE amp owners found a good Robin Trower preset? Thanks.

Hello, 

I am looking for the above part to repair my amp. Is it possible to source this part from yourselves?

I use a Marshall CODE25 and a BOSS GT-8. The GT-8 has a jack that is used for channel switching when the amp allows it to. Is this a feature my amp will be able to use or no?