Hi Guys,

Does anyone know of a place to get guitar backing tracks -like Karaoke doesn't have the voice tracks, I'd like it without the lead guitar.

Thanks in advance.

i dont know how to upload  some of my presets to the marshall forum...any detailed instructions would be appreciated

i have a very nice litte  1x12” Marshall 1931a and I really like it.

Just curious about when they were manufactured?

75W R.M.S                Lead 1X12”

serial no 2184.         8 ohms

Made in England, i suppose?

regards,

Robert

Sweden

my Code 100 head arrived 2 days ago and I still can't get connected via Bluetooth with either iPad or iPhone.... Very Frustrating if this continues I will return this piece of S..t it did connect once but Never again!!!!!!! What's Up With That!!!!

I just did a update to the Code 50 and it still has different presets than the newer 100 ? Preset #9 on the 100 is called Classic Metal and on the 50 its called American 60's. this makes me wonder if it truly took the update???

in the firmware update is the only changes new presets or have any issues that have been reported to your tech team by s number of users on this forum been addressed ?

if other changes have been added to update would it be possible to add a list of them. 

Cherrs

Purchased used amp, jcm 2000 tsl 100 2003 with 2003 1960a slant cab. Bought footswitch, being shipped. my questions are 1) will dsl 100 cover fit my tsl 100   2) where can i get replacement tubes 3) Can i get paper manuals for amp and cab    4) is there a rt angle speaker cord available

For those who gig with their marshall codes! Do you use any external pedals? Not so much wah or additional effects more along the lines of a booster pedal? 

Great to hear what people’s set ups are like! 

For those who gig with their marshall codes! Do you use any external pedals? Not so much wah or additional effects more along the lines of a booster pedal? 

Great to hear what people’s set ups are like! 

what is thebest setting for george throgood on code 50

The PEDL-91009 Footcontroller for CODE Amplifiers gets confused (i.e., it "locks-up") with a specific Push-Button sequence. While this sequence may not be a "correct" sequence of events, it could be possible to accidently use this specific sequence during a gig which will effectively "lock-up" the PEDL-91009 Footcontroller completely. Once this "lock-up" condition occurs, the PEDL-91009 Footcontroller becomes a useless brick. The only way to rectify this condition is to turn the CODE Amplifier OFF and back ON again. This would not be a good scenario to be in during a live gig.

To duplicate the "lock-up" condition, follow these steps:

1. With the PEDL-91009 Footcontroller plugged into a CODE Amplifier, turn on the AC Power Switch.
2. The PEDL-91009 Footcontroller starts up with A1 (Bank A Location 1) either flashing or steady.
3. Using the fourth Footcontroller push-button, advance the Bank to "D" by momentarily pressing the push-button 3 times.
4. Select preset Location 3 by momentarily pressing the number 3 push-button. All is good.
5. Now you need the preset stored in Location D1 so momentarily depress the number 3 push-button. All is good.
6. Now you need the preset stored in Location D2 so momentarily depress the number 2 push-button. All is good.
NOTE: D2 contains the American Overdrive Reverb preset in Location 10.
7. Now depress and hold push-button 2 until "10" appears. This is the preset's Location within the CODE Amplifier.
8. Momentarily depress the Bank push-button and the display reverts back to "D2".
9. Once again depress and hold push-button 2 until "10" appears.
10. Now momentarily depress push-button 2 again. In the display, a "C" appears which is my Tuning Mode.
11. Now (accidently) momentarily depress the Bank push-button. ***LOCK-UP***

After Step 11, the PEDL-91009 Footcontroller is completely locked-up and can only be gotten out of this situation by cycling AC Power to the CODE Amplifier. While this may be an illegal sequence of events, the firmware should be able to handle this exception without locking-up.

Besides not doing Step 11, is there a way to get out of the locked-up condition from the PEDL-91009 Footcontroller?

Thanks for your time and assistance! Dave

I use a marshall code25, which I have bought recently for home playing. The problem is , when the guitar is plugged in and the amp switched on I get a lot of buzzing noise. No noise when played.

I have checked the grounding and cables everything, but the noise does not seem to go away

can someone help with some troubleshooting?

.

Code 50 setting up bluetooth connection and when I use my iphone or ipad to pair the iphone/ipad asks for a 6 figure number to be seen on the code 50. problem nothing shows, have spent ages trying closing down phone ipad amp etc

Does the 100c have the capability to run a second 2x12 cabinet? It surely has enough power since the head is also 100 watts.

I just ordered my CODE 25 but I couldn't find any info about bluetooth playback, only via input jack. 

Is that possible? Thanks a lot! 

Hello everyone!
Someone could help me with some doubts that I have ... I had never connected my hearing aids to my code 50, last night I decided to try some solos playing the tracks of my cel from the gateway player to play the guitar along with the solos of the tracks ... But when I connected and listened to my headphones, the track of my cel played in the code50 sounded perfect on both channels of the headset, however my guitar when it was sounded, it was only heard in the right channel of my hearing aid. ..is this normal? the guitar only sounds on the right channel? or should it also sound on both channels? Is it strange that the track if it is heard and sounds perfect in both channels while I play the guitar and that my guitar is only heard in the right channel?
I appreciate Someone can give me some help, idea or suggestion.

Hello. I've lately been having difficultys with my MG50DFX Marshall amp. The problem is, is that the input jack will refuse to make a connection unless I hold the quarter inch jack up. I don't know much about amps and I'm hoping this is a simple fix. I've already taken the amp's motherboard out from the cabinet and taken the piece of plastic off of the top of the jack. I've attempted to bend the 2 metal pieces that make a connection to the male jack down, but to no avail. It still refuses to make sound without me holding the wire up; otherwise, it'll just make feedback. Any ideas?

Hi all, hope someone can help me with this,

got my code 25 Friday, all set up starting making a few presets of my own all hooked up working fine.

been using it this evening. Working fine turned off to grab some food came back and now it won’t connect to the Bluetooth. 

My phone keeps showing an error message saying it can’t connect make sure the amp is on and in range. It is and is respectively.

tried all manner of phone first then amp on and off first. 

Went out the car and made sure my phone would connect to that and it did fine. 

Anyone with any ideas?

i have an iPhone 7+ running iOS 11 and a code 25

like a said was working absolutely fine all weekend.

thanks 

andy

Do the patches download to your iPhone for use in the gateway? Or do you have to have the USB connected and transfer via laptop to the amp? 

Anyone WHO has a take on Stevie Ray Vaughan’s Lenny?