I have a DSL20H, a DSL40CR and now a marvelous new SC20H. I have a TC electronics Nova pedal which i use in the effects loops of the two DSL amps. When i plug it into the SC20H there is an audible hissy noise which is not there on either DSL amps. Is the effects model fundamentally different between the SC20H and the DSL amps ? Should i expect the SC20H to have a noiser effects loop ? 

I bought this amp second hand last year and have had this problem from the very first day. The reverb simply doesn't work properly. I occasionally get some of it when I first turn the amp on set to the red channel but this quickly stops after a few minutes or if I switch to the clean channel. Footswitch only works for changing channel and does not turn reverb on or off. Any suggestions on what I should do?

I just bought this amp yesterday. Everything works, but the speakers have been changed to Ovation Audient 40 #9732 8ohms. Should I keep them or go tothe original Celestions?

Dear fellow Marshallers,

I have recently bought a Marshall DSL15C amp for my guitar and was looking to use headphones for silent practice. I tried disconnecting the amp output on the back side of the speaker and plugging in my headphones instead - this doesn't seem to work perfectly as my headphones only play in one ear and the sound is crazy high. 

Is there a good way to use headphones on this amp or do I need to buy another amp for silent practice?

Rock on,

Magnus

Hey All

Wat would be today the equivalent replacement for the Marshall class 5?

Thanks

On the DSL 100HR, made in 2022 ... where are the fuses located? On the DSL2000 100 head 2 on the back? Just wondering? Thanks!

I have a Apple laptop with chrome installed.Tryed to install the latest firmware but it goes to 100% and sticks.The new amp is now useless .Please could you help.

I bought the Marshall stanmore ii from Amazon, and I can connect and play music normally after I bought it.

After I updated the firmware from the APP, I found that the machine was unresponsive when I tried to restart it.

Now when I plug it in, nothing happens. 

I would like to ask if there is a way to solve the current problem. Thank you

Hello, is there anyone who has made a Volbeat preset yet.

I'm just a rookie so I'm not experienced enough to create one myself.

Dear Marshall....

I'm a total fan and player of the Marshall Code Amp. In my opinion the best amp in the world ( The Marshall Code) that is...

This amp has everything I need to gig.. record..  and just jam... in one easy to carry unit..  But... I have a problem... my USB plug on my Marshall Code 100w Head is broken will not plug into my cord because the USB port was damaged by me. The prongs in the head were bent backwards and are broken...

IS THERE ANY WAY I CAN GET THIS AWESOME AMP FIXED... PLEASE 🙏 

THANKS.. Allen Perez 

allenperez911@yahoo.com 

I have a DSL H and two 1936 Cabinets. What is the proper way to hook these cabinets up to my amplifier

Hi all,

I have a brand new Code 50 + Footswitch - got them today.  I have saved 3 of my own presets to Bank A 1 2 3.  No problem. Also assigned the tuner to a switch.  That was all fairly straightforward.  

However, I am unable to assign any other (new) presets to any of the other banks. When I follow the exact same process I used for Bank A - The footswitch just defaults to one of the amps, stock presets (all of which sound nasty).

I've watched the tutorials. At the moment, I have only 3 presets of my making on the switch and no, apparent way, of using any of the other banks.

Am I missing something obvious?

Cheers,

Mike

I want to know if its possible to use two effects from the same "area" at the same time, like a distortion with pitch shifter, or tremolo with flanger, phaser, or chorus.
My apologies if my english is not perfect, im not a native speaker

I turned all of the presets off, all i want is a plain Plexi or hot rod amp. I have my own reverb and my own delay and EQ. So I took Marshall Fury Lead which sounds pretty good and turned all the other stuff off...

then when i get app. on my phone turned on it goes and overwrites the preset on the Code 100 head. ??? wtf? Now its noisey and feeding back an out of control.

I cannot risk having an amp that squeals and changes presets like that without me asking it. There are too many settings too much to go wrong. 

I am starting to regret buying this thing.

How do i fix it so that the preset stays in the cloud on the amp and everywhere else forever!.. Until i change it...Can anyone please help with that?

its a 100 watt Code. I just want it to be a dirty power amp, no cab simulator nothing...

thanks, NIck

I tried to plug headphones  to emulated out with the speaker jack out is you mention on the instructions but what comes up is just a white noise, do i need to use a specific headphones? and what should be the problem?

I've never the bias checked on this amp. Had to after I had a certified technician swap out the speaker and power tubes for the first time.  He was getting very low readings. If he maxed out the bias adjustment knobs, he was getting a maximum of 31 mV or 32 mV on both sets of testing ports.  He could not adjust any further. 

Interesting, I thought, so he put back the old tubes and speaker back (and he tried a combination of new speaker/old tubes, new tubes/old speaker).  ALL were relatively the same.  The highest reading he could achieve was around 33 mV.  He used multiple multimeters, so I'm quite confident that the readings were accurate. 

The older tubes were the original Marshall EL34's. The new tubes are JJ EL34's.  It has the original V-type speaker which I was trying to change to a 8-ohm Eminence Texas Heat (8-ohm jack was being used).  The tech is still investigating, but I figured I would ask  on the forum to see anyone had ideas as to the cause of low mV reading/adjustment on the bias.   

Thanks!

Chris

I have  Marshall Code 100 and it is ususable because the presets keep changing by themselves. Is anyone else facing this issue? 

I don't want to always use my phone when playing. There used to be a way to save presets directly in the amp but I can't seem to do it anymore. These past updates have really screwed up the code amp for me. It doesn't seem like any of the support videos are accurate any longer. 

Is there a specific way I should be using these volume knobs ??? I like a gritty, crunchy, clean sound. Like 70's -80's bands. Bad Co, The Baby's, Foreigner

My Marshal-Emberton bluetooth speaker is having issue with sound. Speaker's conneted and charging, but unable to hear any sound.