Hi, I bought the above amp as a standby should my JMD1 bow out. I've had the HCFX about 5 years and never had to use it. However, the issue is the gain/eq/volume controls do nothing in either preset or manual mode. All else (FX/buttons and master) controls are fine. I've reset the amp several times with no change. I'm an electronics engineer and don't mind getting my hands dirty and prod about with a scope or meter. I've had a look around, but nothing obvious. Any help you could give would be appreciated. 

Hi Everyone,

I bought a Marshall Studio Vintage Head in US where we have 110V voltage and 60Hz frequency. If I want to use that amp in Italy, where the voltage is 220V and 50Hz frequency, is it okay if I only change the currently mounted (US-rated) fuse? Or do I need to get a transformer? I am not sure if the amp is only rated for 110V / 60Hz...I like to think that it was built for a range of V and Hz that works for Italy / Europe as well, being made in UK.

If the fuse is the only mod I have to do, then I can just use a campatible power cord to plug it in?

Forgive my ignorance, and thanks in advance.

Antonello

What footswitch should I use when Pedl-10010 (P803) are discontinued.

Regards,

TC

alguien podria ayudarme con un preset que emule el sonido para el Solo de Audioslave Like Stone

bonjour, j'aimerais épuré ma base de données sur gataway, comment procedent-on ?

 I have a DSL20W ! marshall amp wondering how do I connect to my Bluetooth 

Hello-

Is it possible to backup all my Presets for my Code 50?

If so, how is that proceedure done?

Thanks in advance!

Hello-

Bought a second-hand CODE 50 and really love its flexibility when paired with the app.

I've tried recording by mic'ing it up with a SM57  but found the cabinet/speaker to be a little rattley and couldn't determine the source.

That led me to explore USB to DAW, unfortunately my brand new, and ten year old MacBooks both do not see the amp, and I cannot update thr Firmware via browser, per the instructions.

As a last ditch effort I went 1/8th" stereo cable out to L/R RCA with 1/4" adapters to get into my DAWs LINE-INs and pan hard left and right.

Works works great, but my question is - does the CODE 50 send a stereo signal from the headphone out? -and should I be running to hard panned inputs to capitalize on a stereo image? 

Also, any remedy for connecting via USB to my MacBook to at least update the firmware? 

Thx! 

amp powers on and presets all show up and change. sound just cut out! appears like petal display still changes buut no sound at all. jjust stopped in the middle of the song. ran a firm update and reset to factory...nothing

I own a MARSHALL JCM800 LEAD 50W 4210 (1X12", 2 CHANNELS, REVERB), with many years of use, I bought it new about 36-37 years ago!!!, and now the reverberation has started to fail, if I go up the REVERB potentiometer makes a lot of noise and when it goes past 1/4 of a turn feedback appears, I don't know if the problem is electronic, or if the reverberation module has broken, I think it has an ACCUTRONIX or a HAMOND (I haven't disassembled it) Can the module be repaired or does it have to be changed directly? What brand and models is it? Where can I get one? If the same model is no longer manufactured, what would be the equivalent model?

Best regards

How can I reinstall all the 100 factory presets (and overwrite all my selfmade presets) ???

Suddenly, Bluetooth stopped working right on my phone (Huawei P series)  while I'm playing...  Amp is updated to latest version and every time i want to change preset surprise! The phone is unpaired, it needs to reconnect again... but guess what? Now the screen on my code start blinking, not red or the buttons either, but it blinks like if loosing power or something... I don't know if it might be an electrical issue or it's just a lose cable inside that needs a check. 

Is it possible to connect more than 1 device to a Code 100H amp? Either separately (one at a time) or simultaneously?

Thanks.

Hey Guys

I'm looking for a good home amp that isn't a tube amp that I have to crank loud for my tone. Looking at either one of the amps from the MG series or a Code 50

I'm a blues, blues rock and classic rock player - Allman Brothers, Ten Years After, Savoy Brown, Doobie Brothers, Dire Straits, etc

New to Marshall amps - sure I've listened to a lot of the greats playing thru them but I'm not all that familiar with the various models.

With the Marshall MG series, I see various designations such has MG50CFX, MG50DFX, MG50GFX and the most recent are referred to as the Gold series

I worked in electronics so I would guess that the various designators are revisions that took place in the amps - does anyone have info on what those differences are? Or time lines, approx dates when the CFX, DFX and GFX amps were brought to the market? Any thoughts if one series are seen as better

Or would an older AVT50 be a better choice?

Any thoughts would be welcome and many thanks in advance

Keith

aka GnLguy

Hi – just wanted to check something please in regard to using the emulated line out on the JVM205H. My question is could I use my JVM205H and take that to rehearsal without the cab and go straight from the head to the PA and as long as Standby is off, then I won't damage the amp in this configuration. Is that correct?

When I try to connect my Marshall Code 25 to the computer, nothing works. I tried connecting it to my laptop but it was no use. I bought a wire yesterday that supports data transfer, can you tell me something?

Hi,

When will the next Code %0 FW update be available.

Will it address the common issue of the Code 50 main speaker cutting out?

Based on what others have written and use to WA the issue, it really seems to be a Firmware hiccup that causes the controller to enter a weird state.

Please comment on what Marshall is doing to resolve this issue.

Thank You and Best Regards,

TedL.

Good afternoon! I have a code 25 and Flamma FS 21 lopper pedal. How to connect the pedal to the Code to the distortion of the recorded loop by the built-in effect? Is it possible to use audio drive to connect the pedal? Who's been trying? Thank You.

Hello!

I just noticed that the Marshall Gateway app is no longer available in my AppStore (Sweden). Is this correct? 

/M