Hi,
I own a Marshall JVM205C and would like to connect my Headrush Core via EXT AMP OUT to the footswitch input of the JVM205C. The Headrush manual states that this can only be done with a “short-to-sleeve” footswitch input without damaging the hardware.
Please let me know if the JVM205C has a “short-to-sleeve” footswitch input.
Best wishes and thanks in advance,
Peter
Ive just bought a second hand jcm900 4102 combo. its from about 97/98. its my first valve amp, and when i brought it home i had a look round it, and noticed that two of the power tubes had cracked, so i changed all 4. all the preamp tubes are fine. but even though ive just changed them, there is no sound coming out of this amp at all, not even a crackle. HELP!!!
Just got a MG30FX. It has a built in tuner, but nothing in the manual on how it works. Anybody able to steer me in the right place to figure out how to use this built in tuner? Pretty frustrating. Thanks
How in the world are you supposed to get this working? there used to be a utility you could download but its gone.. I have tried 3 different computers and 3 different cables.. same problem, doesnt detect Code 50 connected. Come out.. updating firmware should be simple. Please provide link to firmware update utility or better help than REBOOT computer and amp.. nothing works.
hi ,
i bought a stockwell 11 mini speaker and its blue tooth has stopped working.i am trying to download update ( that i dont want) and it does not work.tried pressing button 5 and 15 seconds.what can i do?
malcolm
Hi!
Is it possible to record silent - without sound from the speaker - with a DSL-1 COMBO (DSL-1cr) using the emulated out?
Regards
Freddie
Are the effects pedals mutually exclusive? It seems like you can't have distortion and compressor (for example), at the same time. Is this right?
Hi All,
I'd like to know when was the TSL line retired, Yesterday I got a TSL100 made in Late October 2010 according to the Serial number.
M-2010-43-0003-1 this tells me year 2010, week 43 (last week of october), 0003 unit number, is this unit number for the TSL? My TSL seems to be one of the last ones made, I guess.
because it is funny is that My JVM410 Serial number is M-2010-33-0619-1 this tells me year 2010, week 33 (second last week of august), 0619 unit number which is higher, would this be only for the JVM?
Cheers,
Andrés
Is the USB cable supposed to be included with the CODE 25 amp? Mine didn't come with one.
Hi is the Silver jubilee mini 2525h auto biasing? Can replace the tubes "plug and play"?
Thanks for the help
I think that this forum should be dedicated, if not to Marshall Code exclusively, then to Marshall products and not to anything else such as advertisements that have nothing to do with music or our concerns and hobbies.
Greetings
hello,
i own 2 DSL 40 amps, 16 ohms each, but one has three loudspeaker options: (8 ohm) - (8 ohm) - (16 ohm)
the other one has more options, (16 ohm) - (1 x 8 ohm) or (2 x 16 ohm) - (1 x 4 ohm) or (2 x 8 ohm)
I want to use one amp as an extension cabinet for the other one, and also as a spare amp,
how do i proceed with the connections ? the spare amp needs to be turned on ? will it work as an extension cabinet if not turned on ?
thank you
I just haven't been able to choose 3 presets and save them on the 91009 pedal. Could you please help me out with step by step instructions to be able to do this. I just want to be able to pick 3 presets on the amp and have them saved on the 91009 pedal. Nothing I've tried works.
HELP PLEASE!
Hello,
I have had this AMP for about 6 years and love it. I have been using the FX Loop with the current pedals for a few years now. Suddenly maybe 8 months ago I noticed the signal would be become unstable... I thought it was one of my older pedals. Recently after letting it sit for a few weeks, I noticed the volume would fade to nothing or to near nothing and very treble/tangy like. A few days ago I was playing and I could hear the volume gradually restore to normal... tonight I was messing with it and the sound went to nothing and without warning came back almost blowing my ear drums out. Anyway, I have discovered that the amp works fine if the FX loop is disengaged. Once I put it on it has no volume... which seems to be worse than before.
I have a DSL40C
Kindest regards,
MjM
hi ,
i bought a stockwell 11 mini speaker and its blue tooth has stopped working.i am trying to download update ( that i dont want) and it does not work.tried pressing button 5 and 15 seconds.what can i do?
malcolm
I´ve never palyed with an Amp Stand. I´ve got a CODE 100c and I would like to know if anyone has the esperience and if it is true that it feels diferent.
I have been wanting to get the kilburn II as it fits my requirements and has great sound quality but the speaker's gonna turn 6 years old this year and there's no news about its successor so should I wait for kilburn III or just get the older one at a discount (around 200$)
Hi there! Proud owner of a 50th Anniversary DLS1C. The serial is M-2012-39-0177-2 but the registrstion site says thats wrong?
Can you veiryf that serial?
Thank you!!
My stockwell 2 could not pair or connect to any bluethooth nor can be found i reset it and tried all manuals info but still without result any help please?
The above amp loses power after 5 to 10 minutes of play and I get reverb even with the control in the off position. This is with the volume and master at half and on clean. In overdrive it does the same though I ocassionally get chorus or a sort of hammered repeat, It has been checked by engineers at Marshall who found no fault in any mode although I have heard from a reliable source that there have been these sort of problems before and the suggestion was to do with the switches. As i had to send this back via the dealer more than 200 miles away and back to marshall, I wouldn`t want to do it again with the same result even though it`s under warrasnty.