my code worked ok with my galaxy 5 but i got a new moto z running android 7.1.1 and it will connect to bluetooth but will not  connect in gateway. when i push scan for amps it never finds the code amp and yes i pushed the bluetooth buttons on the amp.  in the gateway app the in the bottom left corner the amp/phone icon is missing for switching from amp to phone presets. the screen has the blue preset shown but the library has them in yellow.  the worst part is that the display on the code amp is not working. it is barely readable. just yellow with the black barely visable. so without being able to program it using the display it doesn't work with my phone either.  i have owned a lot of marshalls and still have a bunch but i have never been so dissapointed as i am with this piece of crapp. can't use it live because of the dropouts when switching channels and yea i know about using the same amps and settings in all the presets but that is unaceptable. i have the footswitch and thats a disaster too. one little slip like accidently pushing two buttons at the same time or too fast or twice freezes the amp or reprograms it. yea really cool turning it off and back on in the middle of a song.  i tried using it live once and it was a disaster. never again. so i love the tone for recording but now i can't even do that because it wont connect bluetooth and the display is almost dead so i can't program it.

Hello Marshall Team,

I traid pairing with iPhon7 ios 11.2, this works well, can use gateway app with success.

If I switch off BT on my Iphone and later switch on BT, BT connection establishes again and gateway app works.

If I switch off power code25 and later switch power on again, BT connection doesn't come back, no blue led on code25.

According FAQ BT should come back on code25 with same pairing code to re-estrablish the previously paired BT connection.

As workaround I have to delete the BT Device from my iPhone and start BT on code25 (keys REV/POWER on code25) with new pairing.

Is this a known issue ?

please let me know. I have already updated to last FW 1.11/1.41

Thanks and best regards,

Peter

I am connected to my Code 100H via bluetooth and using Marshall Gateway app and trying to play a song using the playback feature and the song will not play. My music library was found and I can pick the songs ok and they appear in playback, but will not play. I just wonder if this has anything to do with Apple Music?

I am using my Ipad and also tried with my Iphone 7.

Frustrating, please help!

Hi,

I've modified about 50 presets on my code 50 amp. I have recently installed the gateway app on my android phone and works well with teh amp.

I want to backup al my modified preset from my amp to another place, for instance on my marshall  cloud.

When I connect my phone and the gate way amp and I select to save the preset and make sure that save to libary option is selected I can save the preset. When I logged on the my marshall nothing of the modified names is visible on my marshall. Also when I checked the library on the phone nothing has changed.

I only can see my modified presets when I connect to the amp. (Golden modify buttons)

My question: How can I backup all my modified presets to a cloud or locally on my phone in a easy user friendly way ?

Hello, I seem to have the same problem as many others. I have no problem with the initial connection but when I come back next day Gateway will not reconnect. I have to delete the app from my iphone and reinstall it.  You really need to sort this out.

I am having a problem when I am using bluetooth on my ipad the gateway app will freeze right in the middle of editing a preset. I am not sure if it is a bug or if its my device, but ive tried reconnecting the bluetooth for my amp and gotten the most recent update. So if someone can help me out that would be awesome.

This amp sounds nice, and I really want to play with the tones, but I lack a compatible phone for it. I have an LG stylo2,  but I also have two macbooks, an imac, and hackintosh. I even got the bluetooth to work on the hackintosh. The play store keeps giving me the error that "my device is not compatible with the software." Followed the instructions to get it on, but to no avail. So, I'm stuck hoping that Marshall gets the message and develops some iOS software for this thing. So, what do you say?

One of my fave bands is The Tea Party, and they use a LOT of different tunings.  However, the tuner in the app only has specific tunings saved.  Is there a way to save other alternate tunings to Gateway?

Just got a code 25,  loaded Marshall gateway on my samsung J3 android phone and noticed when you choose a patch from the library the threshold setting shown on early videos  now appears to have morphed into Gate?    Is this an error on the latest update.??  Has anyone else noticed this.

regards Lee

I made this comment in response to another query and thought it would useful as part of the general forum...

Been following the comments about Bluetooth for a couple of weeks since I have been having the same problem. What I discovered is that the problem is not the amp but my phone. For all intents and purposes, the amp is just a dumb device that happens to have a Bluetooth connectivity board or circuit built into it. The primary connection device is the users phone, tablet, whatever that has the Bluetooth application. Anyone using a Bluetooth speaker should know and understand that the speaker has no application, just an ON/OFF switch and a Bluetooth circuit. It's the phone that makes the connection. So in my case, it was the phone that dropped or lost the connection to the amp. There was no way I could reconnect, even after shutting everything down and rebooting. Going through the Gateway app on my phone wouldn't work and the blue light on the amp would blink continually.

What I then tried was turning off my Bluetooth on the phone, reactivating, and getting the app to pair up again to the amp. Problem solved.

It's possible that all the wi-fi items I have in the house and garage are confusing the phone and Bluetooth but I haven't troubleshooted that as yet. I have found a simple work-around that, I agree, is less than ideal but gets me using the amp the way I want. I don't disagree with what users are saying but I also think that not every fault lies with the supplier. Perhaps a reasonable challenge to us users would be... if any musician is a programmer or electrical engineer then offer some assistance. I have yet to find any innovator who can design for every nuance we currently experience in this tech world. Also if anyone has another, better work-around then please submit to this forum.
Regards,

Marshall Support,

Your copy/paste response to everyone is unacceptable!

You know damn well that most bought this amp online! There is no talking it back to the dealer, other then sending it back for a refund!

I hope others agree with me here that the customer Support for this amp is HORRIBLE, if not worse, nothing compared to the REAL Marshall reputation!

We all have the same trouble with Bluetooth. When one ends their session, turns the amp off and shuts down the app, it is impossible to reconnect again without having to delete in your device’s Bluetooth connection to the amp, then going back to the amp to Pair again.

The problem is YOUR programming and design. This amp is great sounding when standing alone, working the controls on the amp itself, but try using a mobile device or tablet, and it’s failure as an amp is evident! This could be simply remedied with the design of a new application and updated, new programming of the amp. Instead, you continue to reply the same thing over and over again!

i ask every Code 25 owner here, am I wrong?!?

Hello,

My problem is quiet strange and I can not find any resolution for it.

To explain my problem I will start from beginning:

We have 2 places where are presets:

- 100 presets directly in amp

- 100 preset in gatway library

They are diffrent of course :)

I did some modificaiton in both places and I wanted to recover to factory settings.

So in gatway I pushed: MENU- > MY MARSHALL -> RESET GATEWAY PRESETS

After that I did factory reset on amp: Holding "AMP" button while switching on power -> holding store button to recover all presets.

After those actions I don't have original factory preset in amp but I have all the same preset from library.

So Gatway Library and presets directly on amp are the same!

To imagine this situation lets see few beginig presets:

Library:

00 JTM CHill

02 So American

03 19sixty2

Presets in amp:

00 JTM CHill

02 So American

03 19sixty2

They are even if I disconnect all Gatway and remove USB cable!

For example before this situation a had following presets:

06 Ambience

10 Metal edge

Now they are gone :(

I tried:

- reinstall updates

- do another facotry reset in amp

- disconnect/connect marshall gateway

Nothing helped.

While starting there are information about version.

It's "Version 1.11". I don't understand why it isn't 1.41 like last update ?!

I did update for sure.

Just one idea comming to my mind: There is way to do software reset and then do update to 1.41?

Please help me to solve this problem because I lost my favorite presets

Hi, how can I upload the presets from my code 50 amp to my gateway in my.marshall.com and change the order?

After some more hunting and pecking, I discoved how to get the listings to appear in My Gateway. I had to make sure my phone was connected to my computer then went through MENU on the Gateway phone app. After logging in, the app hilighted SYNC and once pressed away it went. I then managed to sort accordingly and save. The app does what it is supposed to do so now I have no problems at this point. Again, why isn't this explained in a document or tutorial...? Programmers and suppliers cannot expect users to understand their thought process without some clue here or there.

Regards.

Ive had this amp five days now and I’m totally frustrated!

Here are my issues:

• Bluetooth Connectivity

The amp loses connectivity with the MyMarshall app constantly!  I’ve followed the instructions.  I’m sitting less then a foot from the amp, yet it loses connectivity from both my iPhone and two different iPads.  It literally takes me 15-20 minutes to get the thing connected, reconnected, and then, BOOM! Again, the sound changes settings on the amp mysteriously, this after taking 15-20 minutes to get the sound and effects exactly the way I want it.  I can’t save the setting, because it disconnects the app from the amp, even though it says on the amp and my iPad settings, that I’m still connected.  Utterly frustrating! It also limits what time I have to practice because I’m spending most of that time trying to get it reconnected and sounding right again.

Also, after following the directions explicitly, I still have to  reconnect the Bluetooth from scratch every time.  The app sucks.

• Apple OSX /iOS compatibility

Guys, Your the best amp manufacturer in the music world.  The music world is OSX/iOS based. Get your brilliant minds together and allow for the amp to be Updated via Apple products!

• The amp and application

This is a great sounding amp, I’m enamored with the sound as I am with most Marshall Amplification products and the price well within reason, but not just the app is HORRIBLE, but also the effects are also less then desirable.  I just can’t seem to get chorus, phase, flanger or echo sounds to my tastes and desires.  Same with the auto wah.  I just can’t believe you can’t duplicate the same great sounding effects as you have in many of your solid state amps.  

I’m hoping you can help, if not, this amp is going back in the box and being returned.

ive got the app downloaded, Bluetooth connected, but playback doesn’t seem to work out of my iTunes library.  Also, directions how to operate the delay and modulation effects.

Any help much appreciated!

Hi, I'm connecting to the Nokia 6, android 7.1.2, code music play goes, but gateway still does not connect, software code 25 updated, restore network settings did not help.....any help?

Hi!
Y have a Huawei P8 Lite with Android 6.0... The smartphone work fine and connect with my Code25  using bluetooth, but Google Play say "This app is not compatible with your device"... I´m very very sad... Any solution?
Sorry for my english, i´m from Argentina.
Thank´s

The presets list is different on my code 100 head compare with the Marshall gateway  (the first 14 presets)  so is the 100 head different compare to Marshall gateway or the other code amps?  and i tryed to reset the amp  but the presents still different compare  to the gateway.