Hey Team!

Own three Marshall JCM 2000 DSL, two are pre 2004 and at least one of them seems to have the Bias Drift issue. Where can I get hold of a replacement main board? I'm based in Germany. 

Cheers

Chris

I am a newbie. I bought the Code 50 thinking it would be easy for it to work with pedal amps, like boss blue driver and metal zone. i did not know the code 50 did not "play" well with pedals. I even bout a noise suppressor. 

Anyways I have been googling and found out that there is a "natural" channel.  I could not figure out what that ment. I thought it was a channel I could just scroll to in the preset display. After further looking into it I fould a link to this site with instructions by a person name david doss:

?

I followed the instructions (and I downloaded gateway),  but very low sound would come out of the marshall with the guitar by itself. What I mean is low sound even when volume knob and master knob all the way up. I do get sound when I activate the blues pedal for example but mainly when I adjust the GAIN knob  ON CODE 50. The volume knob does little. Since when is GAIN the new volume button? I thought in the instructions by david doss GAIN was all the way to zero. 

Is there an easier way to connect my pedals to the amplifier? FYI I do not know the difference between amp and pre amp. I am really learning here. So please baby steps. Thanks in advance. 

This actually is a cluster of a few questions that are closely related.

To be able to carry adapted presets with you, you need to save them tot 'Device', the second Icon from the left.
However to link a preset to a position on the Footswitch it needs to be saved to the Amp, the most left Icon when saving.

Most of the time I actually want both, have them in my device and also in the Amp, because of the footswitch.
I have nog found an easy way to do that, both on a one by one and a 'all presets' basis. Anybody?

Because you need the presets in the Amp to link to the Footswitch, every now and then I would like to return the Amp to the original Factory presets.
There are clear instruction how to do that, but when I do, I do not get the Original Marshall Code Factory Settings, but basically what is in my 'MyMarshall'.
I seem not to be able to go back to the presets that were in the Code when I first bought it.
Is there a way to do that, or what is the logic behind it?

It is convenient to take my presets to another Code and use mine, but in a gig, they need to be linked to the footswitch.
So how to deal with that?

Thanks for anyones help!
Bram

Bonjour,

Je suis debutant avec une guitare de marque Maison type Les paul!quel preampli? quel Ampli?etc?? dois je selectionner et enregister pour avoir un son le plus clair possible! merci pour votre aide!

In the past, it was possible to reorder presets in my library by logging into my.marshall.com. That sort order would then also appear on the Gateway app.

In the new Gateway 2.0 app (which has many things I like and seems more stable), there does not seem to be any way to reorder the presets. On my.marshall.com you can sort the library by name, so I thought I will number the presets to get the order I want. However, the library on the Gateway app seems to always and only sorted by the most recently added presets.

Am I missing something?

Jay

This amp has not been powered up for about 20 years. I have been advised to power it up slowly using a variac to protect the electrolytic capacitors.

Does this make sense or can I just switch it on?

Thanks to any old-timers who can answer this.
Cheers

The Marshall CS JTM 1 carries a tube/valve complement of two ECC83/12AX7 in the preamp and one ECC82 in the power section. Once the tubes have been removed for replacement, how does one tell which tubes go back into which sockets? The pin outs allow for any of the tubes to go back into any of the sockets. I can't seem to find a PDF of the ower's manual either. Is there somewhere on line that Marshall or another source provides this PDF? Thank you for any  help in advance. 

how come i cannot acsess my library?

When I use my CODE100H with a cab, do I need to turn the cabinet settings off? I've seen several "how to" videos (including ones that have a Marshall tech in them) saying as I'm connected to a cab I don't need the cabinet setting. I've got the CODE4X12 cabinet.

Thoughts?

what happen with tuner , why is gone ?

i brought a code pedal 91010 for my code 25 amp but its not working as it is given on user manual. When i plug in the pedal it just change work as a turn off & on  effects like  modulation , delay etc 

can someone tell me what is the purpose of that particular pedal, im confuse please help me.  

Hi dear readers

1st off , i find this forum completely not comprehensive and informative, it feels like quite the opposite,

for my issues, i have a Woburn I, just out of warranty,

ever sindce a few months it turns off while playing music

i use the aux standard, play songs, then wham, after 2-5 minutes it shuts off, and restarts and puts the volume back at 50%

this turn off cycle is times about around 4, to 5 minutes, consistently overal (some days it doesn't )  and it keeps doing it EVERY 5 MINUTES FOR DAYS , ugh :(

this is effectively turned my audiophile soundsetup to a paperweight as i dont go to my speaker to change the volume every 5 minutes

and actually it makes me upset, and anti climactic thoards the reason i was useing it in the 1st place.

i really would like to solve the problem and have a ON OR OFF SWITCH on my device, so i can actually appriciate it for years, with the purchase price of 400 euros plus at launch, i find this absolutely a right.

after my 1st searches on the web i found a lot more people with this issue, and it feels to me as if its being obscured, and not solvable

any fixes found so far anyone?

Is there a document what the DSL40 responds to via a midi footswitch? Any information is appreciated.

Lloyd Plueschow

WHAT FOOTSWITCH replaces the PEDL-10029 for an AS50D AMP?  AS THIS DOES NOT APPEAR TO BE AVAILABLE NOW 

I have a dsl40cr. I want to run a 16 ohm 1x12 extension cabnet and use the speaker in the combo as well. What speaker output jack do I plug the extension cabnet into?

Thank you.

Rodney Jones

Gateway version 1.5.5 (Wireless Bluetooth selection from the set list, playback selection)
I bought CODE 25 because of its services.
This wasn't made for a concert, but it was great for practice. It took a lot of work to set up the sounds and I was able to play music to my liking with the help of my mobile phone. Now, against my will, version 2 is here, which does not know these things. It was difficult to download the 1.5.5 version again because I like it, but the next day I have the 2nd version on my phone again and this has happened several times. What right do they have to overwrite my phone's settings?
How could I use my favorite amp and settings again to my heart's content, because that's what I paid for, I worked for. If there is a new version, anyone who likes it can use it, but why prevent those who like the old version from continuing to use the system that was created with a lot of effort. This is why I can't return the amplifier! I am waiting for an urgent reply!

George

Hey!

I've been having problem with my Marshall Code 50s edit knob, which has been randomly setting random values. Yesterday I tore down the combo and took a look at the faulty encoder. I couldn't find it anywhere, so if anyone know what encoder is that it would help a lot. I will appreciate any help.

Hi Marshall, 

Since your latest firmware update to v1.47 on 1st September and your update to the Gateway app my sounds for my settings have changed.

For example the 00 setting for JTM Chill that should be using the Marshall JTM45 2245, clean setting is now distorted and despite trying to modify it I can no longer get back the lovely clean sound it had as want to be able to use cleans, crunches and distorions for the various modeling offerings so have now lost one of the three types of pre-amps.

Can I roll back to the previous firmware v1.46 which did not have this issue or is it your Gateway update that is causing this change?

Kind regards

Mick Lawson

Hi

I have ahd DSL40 which I really love - I have been using the little push button on the front panel to swap between the dirty and the clean channels. Today this has stopped working. 

It is stuck on 'green' (clean) - when I push the button it goes over to 'red' but as soon as I let go it goes back to green.

The footpedal works fine for changing channels.

Am i correct in thinking this means the little switch has failed??? 

Thanks

My Code is constantly disconnecting from the Gateway app, any ideas ?????