Hi to everyone. I have a marshall code50 and i try to capture a good Iron Maiden tone. Know that Iron Maiden use JMP-1 as a pre amp, i try to adapt the settings to code50. Can you help me to adapt the settings ( for example, for JMP-1 mids -2 what setting is for code50 )?

Thanks

I need help with the code footswitch 

all I want to do is click one footswitch button to go from one preset(clean) to a overdrive preset  

like set the code 50 on 87 then hit the switch to like 50 or whatever. 
thanks in advance for the tutorial for me, tye moron. 

Hello,

I purchased a marshall code 50 in the USA from Guitar center in Jan of this year. Now, there is an issue where the sound from the amp speaker cuts off after 15-20 seconds of plugging my guitar in. I can still hear the guitar if I use any headphones. Upon contacting the store they suggested to contact Marshall directly since there wasn't a specific type of coverage on the amp I purchased. So my question is how can i contact marshall USA to get this resolved? It doesn't seem super straightforward to find their info online. Any help would be appreciated.

Thanks,

Kshitij

Hello everyone from Portugal,

I recently bought a marshall code 50 and I am really dissapointed. Any tips for making it sound better? I have spend ages on it trying to get a good high gain tone but it just sounds 'boxy'. Any help would be greatly appreciated.

Does anybody have a list of the cabs and descriptions, and also more detail on the effects options? Perhaps I am a loser because I don't know all the historical Marshall speaker cab configurations or know what CLS means on a chorus effect :-)  But I don't. A list would be helpful.

I just replaced my old Line 6 Firehawk setup with a Marshall Code 50. I am still figuring out the settings and how they interact but it is definitely an upgrade and a bargain for the money. Line 6 did publish a comprehensive list of amps, effects and cabs though, with detail on what each model was based on, and this was both interesting and helpful. 

This has been asked before and the answer was to search the marshallforum.com, and I did but found nothing.

I have tried using a Boss DD-3 in the effects loop but I can hear a significant drop in volume and tone when the loop is engaged. If I remove the pedal and just have a patch cable going from the send to return, there is no volume or tone loss when the loop is engaged. If I move the DD-3 to the front of the amp there is also no volume or tone loss. Why can't I use this pedal in the effects loop?

I have an issue with tap tempo on the Code 25 with 1.45 firmware and wondered if anyone else has the same issue.  The manual says you should "press MOD and DEL selection switches together". When I do that the amp does indeed go into tap tempo mode (tap the selector switch to set tempo), but regardless of how quick I press the buttons or if I hold down one and then hit the other it always switches on the MOD module too. The other double combination switches (tuner and bluetooth) dont do this and work as expected and only switch on those functions without switching on or off any other modules.

Many people are talking that the new CODE products with current manufacturing dates are already coming from the factory with the new Firmware 1.45, and that it brings many improvements and the equipment sounds better than with the 1.44 which is the last officially launched.

Please release this new 1.45 as soon as possible or at least let us know when its release is estimated on the official website Thank you

Hi,

How do you control system sound (power on & shut down) volume on Emberton?

The system sound is VERY loud, and aggressive sound. 

It's silly when you hear relaxing yoga music, and then you're forced to hear very loud guitar sound at the end of the meditation session.

Thanks.

I need to change the order of the presets as needed, but the Gateway application does not allow changing the position of each preset in memory. 
I don't want to overwrite presets by saving to other stots, I just want to change the order of each preset. 
Is there another way to perform this operation? 
MyGateway does not synchronize with the hardware, it only sends it to the hardware. 
My CODE presets do not appear on MyGateway.

Hi, 

I have a CODE50 (1 week).

After editting a preset, I click and hold the exit/store button to save the changes I made.   The changes are stored but the CODE then "freeze"..  no sound, no change possible,...    After switch off/on, everything is back to normal.  The preset is updated.    

Same thing is happening when I store the preset in the footcontroller...  

Is that "normal"?   Am I doing something wrong?   I presume that I'm not supposed to do a switch on/off everytime that I want to store a present change...   

Thanks

I seem to be having the same issues that a lot of people have reported, where I cannot get the Marshall Gateway app to connect to my Code 25. I've only had the amp for about a week and I cannot get the app to see it.

I can connect to the amp via Bluetooth using my phone (Pixel 3a, Android 11) and whilst connected, can use it as a BT speaker to play music from Spotify. However, nothing I do seems to get the app to connect to the amplifier.

-I've updated the amp to the latest firmware using my laptop/web browser. 
-I've followed all the instructions in the Bluetooth Connectivity Troubleshooter to the letter (CODE - Gateway Bluetooth Connection Troubleshooting - my.marshall.com)

No matter what I do, or what order I install/uninstall/connect, the app will not see the amplifier. Everything works otherwise - I'm able to apply Patches from ? using a USB connection - and the amp sounds great. I'd just like to be able to control it from my phone.

I suddenly have this problem with my Code 50 and my Lenovo tablet. It did work with the Gateway app until today, and it is connected via bluetooth and it will play music from the tablet, but the Gateway app doesn't even see the amp. I tried uninstalling it, reinstalling it, clearing the cache and storage, no joy. Oddly, it works fine still from my LG phone.

Hi there,

Great sound in the speaker, untill the problem drops my mood by constantly losing bluetooth connection

When playing music by radio or spotify, the Stanmorgen is constantly ínterrupted by the and losing repeatedly conntection and then repeates starting/pairing sound (e-guitar chords) which now is changed into an annoying repeatedly sound.
Feels like some device is trying to connect with the speaker.

Checked al the diveces nearby and turned them of which should / could be the slolution

Problem is still there and is more than annoying.!!

The Stanmore II at firtst returned to the store and the send it back for repare, but not sure if there was repared anything?

Again sound is great, need you help

Henny

Netherlands

No question, just saying: I love my new Monitor-II-headphones!

Hello, . . . im new to guitar and this is the first amp i have bought with my own money.

I have a 100h that says version 1.11 when i turn it on. I am happy with the sound for the most part but wish there were some improvemnts to the software   

Due to marshalls apparent lack of interest in the software, and peoples stories on here of updates making their amp worse, I am afraid of "bricking" my amp if i try to upgrade the firmware so wondering if anyone really noticed much of an improvement from updating the firmware, and if it was even worth it?

My two biggest software issues are:

1.when i connect my phone the amp automatically reverts to the first phone presets so if i am in the middle of playing with a certain preset and my phone decides to dissconnect and reconnect it will change the preset, or if I walk out of the room  . .. ... .which is  really, f8king, annoying.

2.the mute lag when switching between presets,  . . . . seems pretty useless and lame to play live if there is a big silent gap between switching tones

Can anyone confirm if the firmware update fixes either of these? Thx!!!!

Well as per title, one ear is giving me extreme levels of noise when I am starting the active noise cancelling feature. The right ear  is giving me so much noise it's actually hurting my ear.

How can I fix this? It started happening when I took my headphones running, and i received a call during that time. But now even after putting the headphones off and back on the noise starts. Even when not connected to anything, and even in a room that is fully quiet (or noisy).

Ok.  A couple questions I'm sure can be answered here.

I just bought the DSL40CR less than a week ago.  It's awesome for something smaller.  Great at home amp.

However, the first clean channel is very low on volume, while if i switch to the other clean its 3 times as loud or more.  Is something wrong here?  One clean channel  can be cranked to max volume which would be the equivalent of the other clean channel at maybe a 2.

Second question, I'm hearing a lot of talk of people swapping out the speakers in these amps.  Is this always recommended?

Third question, I desire more reverb.  Is getting a pedal the answer, or another Marshall amp altogether?  Would a JVM be any better in the reverb category?

Fourth question, would getting different tubes change any of the previous concerns?  Would getting different tubes make the amp better?

Im new to valve amps, and I'm struggling to answer all these questions.

Thanks

I have 2 cabs,   2x12(16 Ohms 100w) and 4x12(8 Ohms 240w).

In Code 100h manual, says the speaker output is MINIMUM 8ohms load. I can use my 16 ohms cab without harm the amp head or the cab itself?

I'm getting trouble in the 4x12 transportation, the 2x12 is way lighter. Until now I'm only using the 8Ohms cab in the code 100h.