I was trying to jam along with youtube so I plugged in my iPad to the "audio in" input of the amp.

Volume of the iPad is cranked to max.

I noticed that the iPad can only be heard when the volume of each channel are turned up.

Problem is, especially in Ultra Gain Channel, the iPad will not be heard until the volume of the channel is set to pretty high (pass 9 o'clock), meanwhile, my guitar sound will be very LOUD that will cover the jamming track and also cause serious air to my neighbour (basically I only hear my guitar and cannot hear the iPad which is connected to the amp throught the "audio in" input).

Solution to the above is very much appreciated.

When I download presets from the My Marshall website, how can I then transfer/import them to either the Gateway on my iPad, or to the Code 25 amp itself?

I can control the amp from the iPad, but it will only let me use the 99 presets already loaded.

Hi,

I listen to music through wifi/spotify on my Marshall Acton. The past few weeks I notice occasionally that it will turn on and play randomly. This sometimes happens very early or late at night at very loud volumes to the point where I've had to unplug the speaker when I'm asleep. I've now debugged the issue to an unknown bluetooth device connecting. I can see it is some kind of DESKTOP device (which I don't own); I see it pop up occasionally on the ios app as connected. 

It must be a neighbor in my apartment complex either doing this on accident or pranking me (doesn't really matter). But I can't seem to stop it. I don't use bluetooth and have never connected to the speaker via bluetooth. Can I disable bluetooth or somehow reset it to stop the unknown device from connecting? I love the speaker otherwise but it's a huge hassle to have this issue. 

Thanks!

I'm able to pair my iphone with code 25 amp. But when I get into the gateway app in my phone, the connect button doesn't show up. I try to connect the amplifier through "menu" -> "Code", but no amp shows up. Please let me know how I can fix the issue

Thanks in advance

I see that the Bluetooth issue I am experiencing has been going on for some time now. I just bought this amp but I wouldn't have had I known how frustrtating it was going to turn out!

The whole appeal of this amp was that I could sit back with my phone or ipad and diddle with the settings peacfully. But no, you can't do that becasue first  you have to pair the amp and phone/ipad EVERYTIME you want to use the gateway app. 

Come on guys, really this is ridiculous. How many other people are complaing about this very issue. You can't sell a half baked product and not fix it. At very least allow us to roll back to the previous firmware. 

Hi everyone . I’m very new to amps, always played acoustic . I just recently bought the Marshal Code 25 . I printed off the operating manual . My question is I have a iPhone, iPad and a laptop . I want to play backing tracks through my amp so I can practice . I’m confused on how to connect to the amp . Do I need a special cable, and is the cable going to be a different one if I use my laptop ? And on the amp where is the best connection to use , I’m aware of the headphones plug guitar plug , which is best to play backing tracks through . Thanks very much .

Probably been asked 1m times, but how do I set up link via Bluetooth with amp and iPad ?

Cheers.

How do I use the line in on an AS50D with an iPhone or iPad?

Do I have to purchace a a mono left and right male to stereo female adapter?

Hi.

Is it just me or have these forums become extremely slow and unresponsive since the weekend???  I also cannot login from my iPad for some reason i.e. I get an error on the iPad (I think it's timing out).  And from my PC's the forums take an age to load.  They're now operating at the same tilt as support!!!  LOL!!!  (Sorry: just having a bit of fun!!!).

Regards,

Dale.

Hi, I have successfully been able to pair my Iphone 5s to the Code 25 2 times now, and when I try to connect my gateway app to the amp, it never finds it. I've tried till I'm blue in the face, and they just will not connect to each other......frustrated!  TY

I have purchased new Code 100 (a demo from Sweetwater)  I am not able to connect the amp to my personal device.  When I press the Rev and Power buttons to connect,  the blue lights flash,  the device number shows up on the amp but either of my devices (an I Pad and an I Phone) will not recognize the Code amp.  The Code Amp does not show up in the "My Devices" so it never has the opportunity to pair or show up as connected .   My phone and Iphone recognizes other bluetooth items, ie, head phones, speakers etc. I have tried the FAQ suggestions and have tried the recommended fixes and I am still not able to connect.  

I have not done a firmware update on the Code 100.

Any assistance would be greatly appreciated.

Thank you,

Steve H.

It seems that my phone is connected via Bluetooth,

but on my iphone SE I do not see a connect block on the Gateway

only  a scan for amps block and this does not do anything.

Help

So I bought a Marshall CODE 50 a bit ago, and with nearly device I've tried - there seems to be a lot of issues with getting the gateway app to connect to the amplifier in general (most of the time it doesn't work - despite pairing just fine). 

I've tried this on the Samsung Galaxy S8, iPad 5th generation, iPhone 7+ - The connection issues seem to stem from the apps use of Btle on these devices. 

To experiment, I built an application that connects to the amplifier via bluetooth for Windows, and issues commands to the amplifier through the PC. This application uses a "classic" (SPP /RFCOMM) socket connection to send commands. The application works perfectly fine via this means - it can be seen running below: 

As an experiment - is there a way to force the mobile applications (if it isn't using a btclassic / rfcomm connection) to use a btclassic connection as opposed to btle? 

Thanks and all the best, 

Michael Mendelson

Principle Engineer, Pulse Interactive

Lead Software Engineer, Pirahna Bytes RED

I need some help with the Bluetooth connectivity.  I hold down Reverb/Power on the amp turning on the Bluetooth feature and I tell Gateway to Scan for Amps and I get nothing.  My Iphone Bluetooth is on.

I've been enjoying my Marshall Stanmore Bluetooth Speaker for 5 years and it has suddenly stopped working properly a few weeks ago. When turned on, the red power light is coming on but there is no sound coming out, either when pairing via the Bluetooth connection or the Input source using the audio cable. I can hear a very low buzz sound which stay at the same volume level (even when turning the volume up). The speaker connects to Bluetooth but I can't get no sound out of it. Have tried with my Mackbook Pro and iPhone. I also have a Marshall Acton speaker which works perfectly. Any idea what's wrong with the Stanmore? Thanks.

I just updated the firmware and now I can't connect .

is it the update that is the problem?

I have an iPad 2. I can connect my Code 50 via the iPad's bluetooth settings. It pairs perfectly fine. But when I try to connect to the amp in the Gateway app, nothing happens. I can't see the amp and can't connect to it. Is there a fix for this?

I just bought the CODE 50 and like it alot; I also have the GATEWAY APP on my phone.

(FYI: I literally must have 25-30 other Top Notch Amps- MARSHALLS / SOLDANO / HUGHES KETNNER / LINE 6 etc;

But I needed something very small for some of the tiny gigs we do; and I feel the CODE has better "Sounds" than my Fender Mustang GT - was using)

MY QUESTION:

-I just created 15-10 CUSTOM PRESETSon the CODE. They are obviously saved on my CODE 50 AMP ....as Presets 1 -25;

-BUT: HOW DO I ALSO SAVE/STORE THEM  TO MY GATEWWAY IPHONE APP???!! (aka; so I don't "lose' them, in case I want to use on another Code Amp, etc.?)

(Basically I'm afraid if I do it wrong; I'll restore the Factory Presets onto my Amp and all my work will be lost!)

-AND; if I do that; will MY PRESESTS  stay in my "APP"; even when the Amp is turned off and not connected to App?

Please let me know and thanks  (and any other Suggestions or INTEL!)!

Dave Saul

ELECTRIC DUDES - NY

My CODE 50 will pair with my iPad, after some difficulty.

However, all it does is let me hear my email notifications through the CODE! It will NOT pair with Gateway ever!

This is a big deal because access to the amps controls is impossible without a remote connection. I'm sorry, but the control layout is a POS if you must rely on the amp interface. Who sits on their amp when practicing or gigging? The top position was a TERRIBLE IDEA! Fire the idiot(s) who came up with that disaster! The Bluetooth MUST WORK AND BE RELIABLE in order to make this amp useful!

I have followed your tutorials and cannot waste 30+ minutes monkeying around with this junk every time I attempt to use it! I have even deleted and re-installed Gateway with it paired with the ipad with no change.

Look, I don't care if you have Jimmy Page locked up inside this thing, if you cannot offer a solution for the Bluetooth issues, it's going in the bin!

Hello Marshall Team,

I traid pairing with iPhon7 ios 11.2, this works well, can use gateway app with success.

If I switch off BT on my Iphone and later switch on BT, BT connection establishes again and gateway app works.

If I switch off power code25 and later switch power on again, BT connection doesn't come back, no blue led on code25.

According FAQ BT should come back on code25 with same pairing code to re-estrablish the previously paired BT connection.

As workaround I have to delete the BT Device from my iPhone and start BT on code25 (keys REV/POWER on code25) with new pairing.

Is this a known issue ?

please let me know. I have already updated to last FW 1.11/1.41

Thanks and best regards,

Peter