I recently bought a barely used mg102cfx. I had been using the line out with headphones, it was kinda quiet, which was weird, but I let it go. I decided to try and get loud since I had a day home alone and.... nothing. Is this a common issue? I tried different cords, ran a single input with no fx chain, etc. and I couldn't get any sound out of it at all. Any advice? Can it be fixed?

Hi everyone, so I recently purchased a Marshall Code 25 off of a friend and the amp is perfect for what I need; however, every now and then it starts buzzing out of control. I'll turn it on in the morning to start recording and the buzz is so loud, it almost overpowers my guitar sound! I have tried 3 different guitars, acoustic and electric, bought a high-end Ernie Ball cable and even moved house and the buzz is still there! I was able to fix it in the past by updating ad overwriting the firmware and then leaving it unplugged for a few hours to a day and that solution worked for a long time, but now it's buzzing again and nothing I've tried has made any difference. Another thing, its plugged into the same power strip as my PC and monitor, but the power strip I've switched to is a $50 uninterruptible machine of a power strip that looks like a space ship, to no avail. Also, when I turn my amp on, it makes my PC monitor kind of short-circuit and the picture freezes and fragments for a split second and then goes back to normal. I have tried every possible amp setting, and only setting the noise gate to 80% gets rid of it, which is unusable. I have also tried other power outlets and it only works when it's in a separate part of the house. I should also mention that the sound does go away when I turn the preamp button off on the amp, which again, makes the amp unusable. The house I moved to is also relatively newly made and has had various electricians here to sort out any previous power issues in the past few weeks. I'm at my wit's end and I seriously need some help!

Hi everybody
I just bought a Marshall Stanmore 2 Bluetooth speaker and I want to connect to my phone to play my favorite music. But I do not know exactly where it connects it does not specify the speaker for me. Can anybody help me with this problem.
Thank you very much

Hello, i have been using my marshall cloud presets for a long time now and suddenly few days ago, when i entered my library or to user presets it says "internal server error"; I have my firmware up to date i dont know what coiuld be causing this.

I have an old AS80r, although the Transducer input works well, however when I plug into the Magnetic Auxiliary channel, there is a constant loud buzzing noise. Is this fixable?

Hello everyone,

I recently bought a Marshall CODE25 and I want to connect headphones, but I don't know exactly what impedance the headphones should have because in the amp's tutorial it does not specify what output the headphone connection has.

Thanks greetings.

Hey everyone hope all is well out there, just a quick question about playing songs and jammin along. How do you adjust volume levels sothat everything is nice and even? Thanks and cheers in advance.

I have a Two Notes CAB M and was wondering whether I could use the fx loop send into the CAB M for speaker simulation and then into headphones but effectively mute the speaker by not plugging anything into fx return? I'm thinking the speaker would still be connected and the amp would see the load but have I missed something and will this damage the amp?

I am looking to connect my code 25 to my laptop and hence looking for the correct USB cable type/spec. Should I buy a USB type A or type B?

Thanks

Dear Sir,

I would like to purchase a 2525H....... 

Since I usually practice at home with earphone, I have 3 questions to ask before I purchase it.

Quesiton 1: Could I connect the 2525H to my boss digital record BR800 through the D.I (at the baskside of 2525H)?

Question 2: Do I need to add a DI Box ? E.g my guitar --> 2525H (through D.I output) --> DI box --> my digital recorder. Adding DI box will make the sound better by changing the signal from unbalance to balance?

Question 3: Could I connect my ear phone directly to the 2525H D.I output?

Regards,

PauL MK Cheung

Hello everyone i hope your all doing well

I recently we are talking the last 4 days purchesed my dream amp a marshall DSL100HR. I was very excited to finally be able to get my hands on a marshall super lead series amp. The dream has become a bit of a nightmare as currently i am the proud owner of a fancy paper weight. I handled the amp head with extreme care when i got it. I let it acclimate to my house temp befor even taking it out of the shipping packiging then when i did i was baby gental in doing so i set it up correctly and double checked so befor even powering up the amp. When i did power on the amp i let the tubes warm up like i read to do so i did this for 15m when i switched the amp to power low mode on i think that its 50watt in that mode. I heard a loud pop pop pop buzz and everything died the amp became unresponsive and the only thing that seemed to be working was that the tubes were lighting up properly and i could run the amp in standby thats it. the front panel was dead the foot switch was dead but the amp could still power on does anybody know what the hell happand ?

what did i do wrong did i just get a lemon ?

is this common with this amp range ? 

I am not rich it took a lot of financial planning to be able to afford this amp i am so bummed out. I did speak to the place i bought it from and there sending me a return label and when they get it they will ship a new DSL to me but this whole situation sucks. Thanks for any insite and help i wish everyone well !

(update) I got the return label sent the amp head back there processing a new DSL100HR order for me i wont get it till tuesday/wensday hope the one they send me works ! If the new DSL100HR also has issues i will most likely swear off tube amps forever not at all pleased with my initial experience at all.

(update 2) I have the new DSL100HR and this one works so i guess i got a lemon befor all is well now enjoy your lives people stay metal ! stay rock and roll ! most important stay safe out there !

I am trying to record my guitar on studio one connected thru' code 25. since code 25 does not have its own driver,  i have installed ASIO4all driver, which is allowing studio one to detect the code as an input device, when I am connecting the code 25 thru' the USB port to my laptop.

unfortunately , when i am trying to record my guitar, no input is detected in the DAW and the file recorded is a blank one.

Am I missing something here or is there a studio one specific setting to allow recording thru' code 25?

Thanks for an early reply

best

Does anyone know if the issue over master volume being too sensitive (too low or too loud due to non-linear response) has been fixed? Looking at getting a Code 50, but this would be a deal-breaker for me. Amp will be mainly used for home practice / recording with occasional gig use, so it must be able to perform at bedroom levels without tone loss. Thanks in advance.

hi there

i have a code 25 which i really like. I dont play a great deal but of late i've noticed some stange behaviour from it;

1/The Lcd display flickers eratically between values and preset names when playing. Sometimes the display just goes blank, but luminated.

2/On occasions the whole sound fluctuates and sometimes even a complete loss of volume after a short while playing. The only way to get it back is to turn the amp on and off repeatedly.

3/Red edit light is almost always on and flickering .

I have tried to reset it but doesnt seem to allow me to do that -  the screen goes blank.

Its still under warranty  (just) but the shop i bought it from (Rockbotton Croydon) is closed due to the Covid.

Any ideas please

Hello everyone, i have a code 100 combo and it has a FX loop so i use a D/O pedal in front as a preamp, the amp and cab and then i have the effects in the fx loop, sonds amazing and i'm very happy with it, now the problem is when i try to record with my PC using the USB conector from the Code into my DAW, the result is nice i have the great sound from the code but it doens't record nothing from the FX Loop so all the modulation effects, delays and revs cannot be record it, i can hear them when i'm playing but when i hear the track in my PC, all the fx are not record it, is there something i can do with it?, Thanks.

Hello, i bought Stanmore II with the Alexa app and when I ask her to connect to spotify she replies that she is not support it. I have followed all the nessecary procedures but it doesn't work.

Hi, just got a Code 25 amp and when turned on (even without guitar or cable plugged in) it makes an almost constant clicking nosie..   Anyone else have a similar issue?  This is my first guitar amp.

Thanks

Hello everybody

I want to buy a pedalboard Line 6 HD pod 500 x and I want to know if it is possible to use it With my code 25 ?

I ask this because on code 25 there is no fx return plug... 

Thanks 

hello there! i just wanna know if i can order the cord for Marshall AS50D on their website?thank's

Hi All,

I've been playing for awhile now, but no so much with amplification.  As a present for a recent celebration, I was given a nice Epiphone electric guitar and a Marshall CODE 50.  Problem is, the manual doesn't tell me everything I need to know, and the online "tutorials" on the Marshall site seem to be more like short overviews and demonstrations.

Does anyone know where there is a comprehensive guide to operating the CODE 50?  Like, lights/indicators, blinking vs. not blinking, other overall how-to's for the CODE 50?  Seems to be a really nice amp, but I feel I'm not unlocking all of its potential.

Thanks, in advance!

Paul H.

Colorado Springs