Forum Questions - my.marshall.com

Goodmorning,

I've bought a pair of marshall major III bluetooth and I can't use the bluetooth mode: after the first charged the red light is fix untill the headphones end the battery. I can't turn on them. What can I do? The seller dosen't answer me. Is there a way to reset them? Thanks for your answer.

Best wishes

asked 11 May 2020 at 09:08 AM

How to remove code 50 handle.

Ok ok, sounds like a silly question, but if I keep going with a flat head screwdriver I'm going to bust them.

had my amp 3 days, just wondering, how to I remove (without damage) the black caps on the hsndle strap.

thanks in advance.

CODE Handles Remove

asked 10 May 2020 at 11:27 PM

DSL5CR louder on clean channel than dirty

Just realised the classic gain channel (clean) is louder than the ultra gain channel on my amp. Is this normal? This is with both channels being set the same. Also the preamp tube for the classic gain channel is very dim to the point it's hard to see it lighting up! This is my first tube amp so I'm pretty clueless.

Valve Tubes DSL5CR amp

asked 10 May 2020 at 07:26 PM

Headphones in a JCM 800 Studio amp.

I have a JCM 800 SC20H amp. Where and how would I plug in headphones to practice silently?

Thanks!

guild

asked 10 May 2020 at 07:06 PM

Error 43 USB

Hello!. I want to connect my Code50 but it says "usb error" 43. try everything on google but it doesn't work. Any solution? Thank you

USB

asked 09 May 2020 at 11:43 PM

How do I dial in my Amp Settings (I have a Marshall CODE50, by the way)?

Hi, guys.

I'm sorry for not posting on this forum as much, but I have a question I would like to ask. How do I dial in my Amp Settings, to get my own unique tone? It's currently a pain in the bum to do, because I always change my mind, constantly. Any tips would be greatly appriciated.

Louis :)

CODE Code 50

asked 05 May 2020 at 11:30 AM

AC/DC preset

What is the best preset for AC/DC? I have an SG.

Presets AC/DC

asked 04 May 2020 at 11:41 PM

using code for music

is there any way that i can use the amp for listening to music without using the presets ?

thx

CODE Presets

asked 02 May 2020 at 05:14 PM

can i run a laptop amp sim through my code 50!

Hi

I have just brought a Fender strat new and got to be honest it doesnt sound as good through my code 50 as my Les Paul or my Yamaha strat did. The guitar came with 9 gauge strings when i usually play with 10`s. Can i put an amp sim on my laptop and play that through my Code 50! and how would i connect

Thanks

CODE Guitar FenderStrat computerampsim

asked 02 May 2020 at 03:44 PM

Code 50 connectivity to iPhone SE

Hi all,

Along with a number of people on here it seems, I am having trouble with the Marshall Gateway App, which won't seem to connect to my Code 50 amp.

It worked first time round when I set it up, but now, a couple of weeks later, it won't connect. The phone says its connected and I can play music through it (when playing You Tube it comes out of the amp) but the gateway app says its not connected.

Unlike a few people on here, I can scan for amps and click the connect button, but with my phone sat on the amp, it just says 'connecting..." forever and ever and it doesn't. Why??!!

I've tried unconnecting and reconnecting the app on my phone as is recommended and switching the amp on and off but no joy.

Can anyone help and has anybody else had the same problem and managed to fix it?

Many thanks

Craig

CODE Gateway iOS

edited 02 May 2020 at 12:08 PM

asked 02 May 2020 at 12:05 PM

Bluetooth Headphones

Can I use bluetooth headphones with ampli Code 50 to play guitar and listening it? I have bluetooth headphones but don't works...

CODE Bluetooth Headphones code50 code50amp

asked 02 May 2020 at 10:10 AM

code100H to di box to mixer

hello everyone I play a les paul into my code100h, then into a DI box that goes back to the board and P.A...........I hate my sound,i am very old school so I want my 2x12 cab. onstage...but oh did I mention I'm on the Worship team ay my church.....if I have to use a D.I. for now can anyone recommend one for my situation?

asked 02 May 2020 at 06:35 AM

Did I Make a Mistake Getting the JCM 800 instead of a Plexi? / Speaker Opinions for the 1960B

Looking for that Jimmy Page clean mid-range grind from the film The Song Remains the Same, not record - (and yes, I know he used a Plexi and had his Paul modded) / Steve Jones Never Mind The Bullocks grind (and yes, I know, he used a Fender Twin with a Custom Paul). I want to get in the ballpark of these sounds if possible, but I'm afraid I have the wrong head and DEFINITELY the wrong speakers (1960B 4 X 12 with G12 T - 75's which are garbage IMO). Here's my set-up, any suggestions would be greatly appreciated.

Guitar: 2001 Les Paul Standard with Alnico 2 PU's. If you have alternative pick up suggestions (Whole Lotta Humbucker, PAF's?) or Capacitor Suggestions (which I heard make a big difference) please feel free. My real concern is:

JCM 2204 50 Watt from the 80's - I've read that this is more of a metal amp. That's what I'm not going for. I'm wondering if I should have saved up and gone for a Plexi - it's that classic, relatively clean grind with that mid-range hump that I'm going for. Is this true? Can anything be done - it simply has no clarity and is muddy, no matter what is done through adjusting knobs (pre-amp, master vol., gtr. vol., drive pedals MXR). This brings me to my next question concerning speakers. I've done a considerable amount of research, but seem to be going down a rabbit hole of more questions. Once again, any suggestions would be really appreciated.

Speaker Replacement Options for the G 12 T - 75's

1. Two Alnico Blues with Two G 12 M's - I know that the Blues are louder and more aggressive than the GB's. I've also heard the The Blues can blow out a 50 Watt Head - is this true?

I love the blues because they cut and grind, even if they are a tad aggressive. Perhaps the combo with the G 12 M's could temper it a bit (they're creamy). Is this combo possible? Will it sound unbalanced since the blues are louder?

2. Investing in Scumbacks or Webers but which ones? Honestly, I prefer the Alnico blues and G 12 M's after hearing a comparison between Scumbacks and G 12 Heritage and G 12 M's on YT, but I may be missing out on something here because better, more experienced players than me rave about them.

3. Two G 12 M's and Two G 12 Heritage - I've read conflicting reports on whether they jive together.

4. Four Heritage?

Thank you and once again any help would be appreciated.

Speaker Heads

asked 30 Apr 2020 at 09:18 PM

Issues Marshall Stanmore speaker

Got an issue with my Marshall Stanmore wifi speaker. When playing music through Wifi or Bluetooth the volume always goes down on its own. Have to turn up the volume between 5-10 times before it stops turning down the volume on its own. Wifi and Bluetooth connection are fine, it has this issue which each connected device I've tried and with all apps (spotify, Google Music, YouTube,...). Any idea on settings or stuff i can check? Maybe a firmware update something?

Bluetooth Speaker Firmware

asked 29 Apr 2020 at 06:23 PM

CAB BUTTON

Can the code amplifier be used without the cab button?
Every time I play with a headset and turn this button off, the headphones start to make Terrible and robotic noises?

CODE

asked 27 Apr 2020 at 07:38 PM

Diagram for foot switch cable

Good day

I own an AVT 2000 valvestate guitar amp +/- 15-20 years old and lost the cable in a move to connect the footswitch to the amp. Is it possible that you can send me a diagram so that I can make up a new cable and also advise which type of cable to use.

Thank you in advance

Footswitch

asked 27 Apr 2020 at 04:36 PM

Noise issue Code 25, but not via headphone connection

There a many questions on this forum about the irritating noise with Code 25 and Code 50. However, it happens via the speaker only, not via the headphone connection. The presets sounds very nice in that situation. Can you explain?

Because of the noise issue I just use the Natural sound and add FX pedal effects. No noise at all. But that is not the way I want to use the Code 25. I want to use the presets.

CODE Presets Speaker

asked 27 Apr 2020 at 03:15 PM

CODE 50 LCD screen does not display text

The screen is orange, but no text is displayed. Is this a hardware issue?

CODE

asked 26 Apr 2020 at 09:14 PM

New guitar and amp user Marshall model MG10CF

New guitar and amp user. Can anyone tell me how to get this amp to put out sound. Pawer is good to amp...

MG10CF

asked 25 Apr 2020 at 08:57 PM

Valvestate 100

I just picked up a valvestate vs100 with a different kind of grill cloth and red lettering..can anyone tell more about it and maybe the year it was manufactured...thanks Jeff....

0

2

1.9k