Questions
Showing results 21 to 40 of 49
0

votes

0

answers

878

views

Hi, 

I have had my code 25 for about 6 months and for a while now, everytime I connect my phone and edit in the gateway app the preset freezes and I cannot change anything or change the preset. On the phone it says I am changing but there is no actual changes happening. On the little orange screen on the actual amp it stays on that preset even if I twist the knob to change preset but can still play and change volume.

TodayI was getting sick of it and looked up if there are updates for the amp and there are, which I then went and installed the latest firmware update. But now when I turn on the amp it shows that it's on and shows the preset but stays frozen and will not play sound at all. Is the amp done or can it be fixed?

asked 13 Aug 2019 at 08:03 AM

Krishan Talati
0

votes

2

answers

755

views

Hi,

 

if i use a clean preset of the marshall code 100H i got issues with crackling sounds. Even after turning it off and on. Its extremly annoying and it destroyes all that i record into my DAW. With this crackling sounds this Device is absolutly useless!! I've also updated to the latest Firmware version but nothing changed!

 

Please help!

asked 21 Jul 2019 at 10:40 AM

dominik komenda
5

votes

2

answers

942

views

Marshall finally released V1.43 of the Code Firmware.    My phone finally connects reliably over Bluetooth which is a plus.   It sounds like 3 different devices can now be paired too.    A little disapointing that no other presets or other functionality was added but at least this major issue was fixed albeit after a UNACCEPTABLE time frame.    I expect more from Marshall.    

asked 14 Jun 2019 at 03:05 PM

Gary Hensley (5)
0

votes

1

answer

884

views

My CODE 25 connects to my PC via both through MIDI in Chrome and through the Firmware Update Utility but it refuses to do anything but sit there while the gold loading circle just spins and spins. I've left it for upwards of 30 minutes. I'm unable to click on check for updates or anything. Tried rebooting a few times, tried turning blutooth off while doing it, etc. My amps current version according to both the amp and the app is v1.3. Any suggestion on what to try? Should I do some kind of factory reset to the amp and try again?  Any help or suggestions would be appreciated.

As a side note, I'm also unable to "download preset to amp" to test it out even though it's giving me the go ahead to do it on the preset site. I'm sure the issue is connected to being unable to update the firmware.

Thanks!

asked 21 Mar 2019 at 04:15 PM

Brett Ewaschuk
0

votes

1

answer

1k

views

i purshesed marshall code 25 about 8month back, now when i turned on all binking lights are blink and than off... after on no lights are blinked in any presets... reset amp, update firmware... not done anything!! atteched some of pictures!!

asked 12 Dec 2018 at 08:13 PM

Soumyadip Roy
0

votes

1

answer

677

views

Hello, I have acquired the CODE 25, really an excellent amplifier, very versatile and very good presets. My problem and please I hope you help me to resorve it, is that even though I can connect via Bluetooth, I can listen to my tracks ....... the big problem is that when I want to use the FX or presets it appears that there is no amplifier connected ... (either from my android phone or my Ipad I ... I do not understand what the problem is.) Secondly, when I want to install the MARSHALL FIRMWARE UPDATE UTILITY, to enter presets or update the ampli, does not recognize the connection.I request guidance to be able to make full use of such a beautiful tool for my music.I use Widows 10 and G. Chrome.For your attention, thank you very much

asked 16 Oct 2018 at 05:55 AM

Luis Ernesto Espinoza Guerra
0

votes

1

answer

550

views

Recently got the CODE100H and it has a problem where if I save a preset the amp freezes and no sound comes out.  Could this be a firmware bug? It happens often, a few times it saves successfully but most times it locks up.

asked 26 Aug 2018 at 09:14 PM

Vegar Elde
0

votes

1

answer

643

views

Hello all,

I have had my Marshall CODE 50 since last summer with no issues whatsoever...until now.  Today when I decided to turn on my amp it was going NUTS.  Whenever I turned up the Master dial my presets kept changing rapidly on their own and the amp would not output sound whatsoever.  I tried updating the system's firmware and even performed a factory reset but nothing helped.  Has anyone experienced a similar problem?  Any advice or help in the right direction would be greatly appreciated.

asked 23 Apr 2018 at 02:57 AM

Bryan Burke
0

votes

1

answer

877

views

 hello,

I’m having problem with my CODE25 amp knobs( bass, treble, volume, gain, middle) like whenever i change bass , treble or anyother knobs changes by itself by 0.1-0.2 . And while changing one  knob, another knob presets values flickers in between. 

I want to know if anyone else having the same issue or there is problem with my amp or its a firmware glitch..

please help me...

 

       

asked 20 Mar 2018 at 11:36 PM

nishant verma
0

votes

1

answer

801

views

Hello from Ukraine, Marshall team!

Can you add in the next update, if it will, fuzz the pedal or create a preset with fuzz sound. Thank you and apologize for my English.

asked 15 Mar 2018 at 08:42 PM

Yuri Nechyporuk
1

vote

13

answers

6k

views

I just bought my code 50 yesterday. The master volume is a real problem, I may have to return it just because of that. We can adjust the volume, but the second you change a preset it goes way too loud again. Even if I were to modify each of the 100 presets manually (which I am not in the mood to do), when the next firmware update happens those presets will be overwritten with the factory reset so back to square one.

Marshall, can you please give us a timeline for this? I have 30 days to return this thing to the store, I need an answer because I do not plan on living with this issue forever, maybe I will swap if for a Fender or Line6 or something with quicker response time from the manufacturer if need be...  quite frustrated and only used the product for 30 minutes. 

asked 20 Feb 2018 at 06:19 PM

nobody here (1)
0

votes

1

answer

910

views

I have just downloaded new firmware to my code 50. I dont see anychange. Can i listen to new settings before factory reset!  And can i delete any of the factory presets from 00 to 99 and it will be replaced by 1 of the new presets.! Or are the first 13 deleted and replaced by new. Hope that makes sense. Thanks in advance

asked 05 Feb 2018 at 09:30 PM

martin jones
0

votes

2

answers

723

views

I've only had my Code 25 for a few weeks now and finally updated the firmware yesterday. Wondering where the promised '13 new presets' were (still only the original 99 on the Code), I started poking around here. Here I've found the 13 new official presets, as well as some other user made ones I'm interested in.  But as stated in the subject, I need some help.

First, I chose the Add to My Library Option.  Here on the desktop , I see 11 tones (wrong number, but not the biggest issue) have been added to My Library. But when I actually look in the Gateway, again, it's the same original 99 tones.  I don't see any of the new ones anywhere. So I'm obviously not able to get these via Gateway right now.

Via the cable, I'm able to sample these new presets. I choose individual presets from the website, load them on the Code (one at a time) and hear what they sound like. But turn the amp off and on and they're gone again. I've tried synching, but that doesn't seem to change anything.

Things seem to be working mostly the way they're supposed to. But I'm clearly missing a finally step or two. I'd like to get at least some of these new (Official/User) presets into my Gateway and onto my Amp. Any help would be sincerely appreciated. Clearly, the simpler the explanation the better.




I'd appreciate any assistance. If appropropriate, feel free to call me 'Dummy', 'Idiot' whathave you.

asked 29 Jan 2018 at 07:26 PM

Brian Fox (1)
0

votes

1

answer

1.1k

views

Hi,

My son has a Code 25 and the preset knob stopped working i had a look at it last night and tried the firmware update from the web site now it wont do anything and just says check USB. has anyone had this problem or have a solution.

thanks in advance

Alex

 

asked 26 Dec 2017 at 11:47 AM

piers lee
0

votes

0

answers

1.1k

views

I just got the amp and am very close in getting my Strat sound, but, I play my Les Paul a lot more adn am having trouble getting a good clean with depth, not in your face, and slight break up when you hit it hard but clean when you hit it lightly.  So far I get either muddy or brittle and no depth.  Oddly enough, I got the exact sound from the Blackstar 100 I bought and it was a factory preset right there on the amp ! Then it  blew up 2 hours after I got it. Turns out if you upfdate firmware on that one you kill the amp.  Saw it on the forums after I did the update.  Which is why I ended up with this Marshal Code 50.   Any suggestions?   I went through all the presets here on this site and just could not find anything.  What I like is David Gilmore sounds, Santana sounds,   And what I am searching for is a good Les Paul sound with depth,  clean , but a bit of grit when you hit it hard , some air to it , and not an in your face sound.  Sound is so hard to describe! 

asked 19 Dec 2017 at 03:38 PM

Rodney Tod
1

vote

1

answer

1k

views

I updated to the latest firmware on my Code 50 which states it updates to new presets 00 thru 12 but even after running the update I still have the same name on said presets. Ive seen on the new 100 watt Codes that the presets have been updated and some new names for the presets which I really like. I was hoping this latest update would be the same on the 50 as the 100. Even though the names didnt change I can hear some differences in the latest presets.

Is this latest firmware update suppose to mimic the 100 watt amps ? Or is that not possible yet ?

asked 17 Dec 2017 at 03:03 AM

steve strano (1)
1

vote

9

answers

1.1k

views

hi

firstly, i am disappointed with the code.  this amp seems like its still at test phase, its to buggy for a release.  would expect marshall to only release a new product unless its 100% reliable.

connecting ios devices to code is always problematic. very unstable.

my main problem now is updating firmware.  cant update in chrome. i have midi capability approved for marshall but keep getting midid disabled error even though i clearly have midi enabled.

tried opera, and the midi is working and the code is coming up as connected. i get as far as a message stating that firmware is updating with a status bar and percentage marker. doesnt update! stays at 0% and never moves. left it overnight and still 0% when i woke.

i have spent more time messing about with the problems with this amp than playing guitar. do i need to sell this and just buy a guitar interface? maybe

also, when using this amp through garageband there is no dedicated clean preset to use with garageband or other AU. basically it goes into garageband with a marshall preset and then the other AU preset is on top of the marshall preset. ideally this amp should include a straight clean unprocessed preset to work with other software AU's.  i really do think people need to consider a good quality guitar interface before purchasing this amp. its very restricitve and unreliable. if you are not gigginG i dont see the point in this amp. 

CAN SOMEONE HELP ME WITH THE FIRMWARE ISSUE ASAP!

asked 15 Nov 2017 at 09:40 AM

ste cullen (5)
1

vote

1

answer

3.1k

views

I'd really like the ability to roll back firmware updates.  The tone of this amp has got worse with each firmware update I've installed.  I wish I would have left it at the default when I got it.

 

The first firmware update I installed ruined the DSL, and 50's British amps, and now this last update has ruined everything else.  All the presets I created sound completely different now.  What a waste!

 

I'm really beginning to regret buying a digital amp.  

edited 26 Oct 2017 at 03:47 PM

Sean Nixie (5)

asked 24 Oct 2017 at 07:39 PM

Sean Nixie (5)
8

votes

2

answers

1.6k

views

Hello.

Just downloaded the latest firmware updates and updated all my CODE amps. (almost a full-time job lemme tell ya!!!  LOL!!!  Only joking!!!).  No problems with the updates at all.

I do, however, have a suggestion Team Marshall:

Can you not change the firmware updates page to reflect the current firmware revision and release date (and, if it's not TOO much trouble, maybe include all previous firmware versions and their changelogs)???

Reason for my suggestion above:

Only reason I knew that there was a new firmware update was because I was browsing presets and happened to notice that a new section had been created detailing presets contained in the newest firmware version.

In other words: it'd be nice to know as and when new firmware updates become available so that we all know to download and install the latest firmware updates.

As for the sidenote mentioned in the title of this message:

Be aware that although the new firmware includes some new presets and the website indicates that it does not overwrite existing presets: this is only true if you do NOT reset your CODE amp. to factory defaults after the latest firmware update.  In other words: if you download and install the latest version of the firmware and then reset your CODE amp to factory defaults then the NEW presets take effect and the old, original, factory default presets are overwritten.  Not really a big issue but you need to be aware anyway.

Regards,

Dale.

asked 11 Oct 2017 at 06:07 PM

Dale Paterson (104)
0

votes

0

answers

666

views

i noticed a strange ping in almost any preset.

i did a firmware update and the ping gone.

i turned off my amp and turned on, and the ping was there.

i did a firmware update and the ping gone.

i turned off my amp and turned on, and the ping was there.

i did a firmware update and the ping gone.

i turned off my amp and turned on, and the ping was there.

and so on.

it's in the AMP section. when i turn off AMP the ping is gone but also the AMP that i was using.

Also i reseted the Code 50 to Factory conditions and the ping is gone, but when i turned off/on the ping is back. 

What can i do to resolve this? 

 

edited 11 Aug 2017 at 11:27 PM

Sergio Lopez Guevara

asked 11 Aug 2017 at 10:53 PM

Sergio Lopez Guevara
Showing results 21 to 40 of 49
Loading - please wait...