I recently got a new iPadPro. I can Bluetooth to my Code25, but when I open the MyMarshall app I get the following: "Context 3D not available! Possible reasons: wrong renderMode or missing device support." What does that mean and how do I get the app to open? I deleted the app and reinstalled and have powered the 25 down and restarted.
Hello,
I have just bought the Marshall Code 100 which I was really excited about having read the description and watched the demo videos. The amp does sound amazing, but yesterday, on the first occasion that I actually tried the amp during a rehearsal, I was shocked to discover that when I step on the provided footswitch to change presets (like activate one with distortion or heavy delay), mid-song, the flow of the sound broke, there was a moment of silcence before it switched to the next preset. I've been trying to research this on the Internet, but have only found 2 instances of it being addressed, no one talks about this in review videos or blogs. This baffles me - how is (mostly) everyone ok with this?
This effectively makes it impossible to use the built-in effects of the amp, which is exactly what its main outstanding feature is. Why have a 100 presets when you can't switch mid-song? Are guitarists only supposed to use the Code family to select the main sound they want for a certain song, then keep using pedals for changes mid-song?
I'm extremely disappointed, since the built-in effects were the main reason I went for this amp - I wanted to use this as both an amp and a multi-effect board to some extent. Is there any fix for this? A firmware update maybe, or does the separately-sold Code pedal make a difference?
Seriously considering returning it at this point.
I been use My amp and sudenly stops working, so i look and theres no light in the screen and on the botons but there is sound from the speakers when you turn it on so i think the power it's ok but the control panel isn't working, what can I do?
I run the two seperate channels (normal and boost) at max - all the levels are at ten, and I then use the master pres at 6 reverb 6 and then the volume to just dial in the volume level I like.
This way I can run bedroom or gig volumes on a JCM800!!
Question is - by having all the levels dimed and dialing in the volume I want via the Master am I cooking the amp too much. Running like this - even the clean channel even has some serious crunch.
Is this really just attenuating and should I worry about burnout?
Hi guys,
i have a marshall code 25 and i have a problem when i link my phone via bluetooth and via jack to have a backing track while i'm playing guitar.
via bluetooth the sound is like in a shell, is not clear and brilliant, but like closed, sorry i can't explain well. Like the treble very low, and the middle and bass high
via jack in the ipod input i need to raise the master volume to the top to hear something but is very low.
A friend has a marshall 15watt without bluetooth but with the ipod input. When i link the phone there, the sound is not affected by the master volume but only by the phone. And the sound is good like directly from the phone. The pots on the amp changes only the sound from guitar like normal use.
What can i do? Could you help me?
Thanks!
Could EL84 tubes be substituted in place of the EL34s if need be? EL34s are becoming less available.
So I plugged it in today after a few months (kinda lost interest in guitars for a while) and only a couple songs into my session the sound completely stopped, the screen and buttons started blinking, and nothing changed it. I turned it off, unplugged it, and plugged it back in but the only thing that was different was only the screen blinked. I read online that someone had the same problem on a 50 and the processor on their amp was done. I just wanna know if there is ANY other thign that could be causing this and if it is easier to fix/replace without getting a whole new amp.
I just picked up the guitar for the first time in months and then this had to happen. I guess its just my luck.
Hello
Were these amps handwired?
Thanks
Hey, I've been having issues with my Code 50 amp suddenly. When I plug in my guitar I can't play any sound, yet it works in another amp so my guitar and leads are fine. I've updated my software and the amp still doesnt work, so I think I'm gonna have to resort to a Factory Reset. Just wondering if there is a way to save my presets before I do a factory reset?
how to update marhall code 25
Anybody who has made a good preset for Playing Jeff Buckleys halelujah?
Running setup causes this, over and over again if you hit the OK button. Doesnt help running it as administrator. This is Windows 10.
Is there a fix for this because I dont have wifi where the amp is, and cant move it easily.
This post is for all those who own a Marshall CODE of any version,
to report their failures or issues when installing the new Firmware 1.46,
since there are many problems that this has caused to users and it
is worth collecting said errors to request to Marshall the necessary
corrections in a new version.
Hi ! So I'm wondering if there are other charging options for a Marshall Killburn 2? I had a Killburn (1)before but it was i big hassle charging the speaker through my 12v output with a transformer/converter since the only cable seems to be a figure 8 cable?
Does anyone have other options? Is there any way to use figure 8 cable on a 12v output? Without using a transformer ? Don't have the possibility to charge through a regular socket at work so.
Thanks for replies !
Marshall technicians or whoever can help me.
I have a code 50 it has a problem:
when I turn it on after a while it starts blinking the "edit/store" button and Gian lowers the volume by itself.
if I go back or forward a presset it goes back to normal.
in the latest version available.
has anyone gone through this or Marshall could help me
I am looking to buy a Marshall 1974x in the UK does anyone know of one for sale?
Hello guy's
Quick question:
I have no problem connecting my Iphone and the sound is really great
On the other hand my mac book pro doesn't want to recognize Minotor III
I'm not sure if I'm using it the wrong way though... I'm still doubtful
Would you have any clue
Hello,
Can anyone advise where can I find spear parts for Marshall Stockwell?
My Marshall Stockwell Portable Bluetooth Speaker accidentally fell from a height and broke the volume controller with the knob.
Please see attached pictures
Is it possible to put castors on code 100 combo? If so what type?
Hello all. I am sorry for what is about to be a redudant and maybe to some, stupid question. I just got my dream amp, the JVM 410h. This is also my first tube amp and I want to care for it for long term use. For silent recording, I am running the line out with an xlr cable from my JVM head to my Scarlett interface, which I connect to my DAW and use cab modelling their for recroding. Do I lieave my standby switch on or off? The STANDBY/ silent recording notation is a little confusing to me. So should switch be pushed up or down? Also, should master volume be set to 0? Thanks in advance