i just bought marshall emberton . can you tell me plz if its real or fake.73400553E03091A0038019

Bluetooth подключён к Code 25, но Gateway не видит его

Hello,

Last December I bought an MGFX30 amp. After a few months of use I realized that the volume knob does not correctly work. On either of the 4 channels if I turn the volume fully down, and then turn it up, the volume becomes faint and distant. If I then switch to any other channel without touching the volume knob, the volume of the other channel is correct, loud and clear. 

I returned the amp to the seller and it got replaced today to a brand new one. When I started to use it today, I immediately checked it, and have the same issue: the volume being turned fully down then up - sound is faint and distant, but other channels produce a loud, clear sound. 

I don't think that this is the way the amp should work. However, the odds of having two faulty models from the same seller seems to be very low. 

How can I fix this issue? Is this the way the volume knob supposed to work?

Thanks

Got my first Marshall yesterday, but it doesnt really work. When I turn it on I sometimes have some sound (sometimes good sometimes bad) for like 10 sec-5 min.

But after that nothing. Turning it on/off doesnt help either. I noticed that it sometimes stops right when my phone connects/disconnects to the amp. Lights and everything is still on tho. What can I do?

Hello

Please inform how can I get this Amp Manual in pdf File, english language. 

Thank you

Best Regards

Vitor Lopes

Greetings,

How can I fix this issue while importing patches from my amp to the desktop?

Im connected, and I can change all the settings, but I can't grab the current patches.

I think I have fixed it in the past, but it has been a long time since I have used this software with my amp.

Hi! How do I register my speakers for warranty? What is the site?

How do I register purchase of a new amplifier for the extended warranty please ?

On my SC20 Head if I use the low sesitivity input jack and max the gain and master, the volume from the speakers is really low compared to the same settings with the same guitar in the high sesitivy jack. Certainly not a gig-able volume, is that how it should be?

It neary blows the windows out in the high input

I have a Marshall JVM 205C that is about 2 years old.  It used at home and maybe gets 1 to 2 hours a day use a low volumn.  Today I turned it on and it started making popping noises, not exceptionally loud and then the volume just faded away.  The power light and standby lights remained lit.  I did a little reading and and I thought I should at least check the fuses.  Where are they located?  There’s a little tray that pulls out, holding two fuses (T3.15AF250N), just underneath the Mains Input.  Are these the fuses?  I can not see any electrical connection to these fuses and I thought they might be spares.  If that’s true, where are the functioning fuses?

Cheers!  I bought this beat up 100 Watt Marshall Tube Amp back in the 70's.  I think it was 1972 but life was a bit of a blur in those days.  The cover was so torn up, i removed it and stained the wood to give it a bit of character.  Last time I fired it up it worked fine.  The fan is loud but it did the trick.  The fan appears to have been replaced.  I was an aspiring bassist thru high school and early college but got in a motorcyclye accident which put an end to that dream.  I won't go into the details but my fret hand had to be pinned together.  Regardless, I am retired now and would like to get back into playing.  I was wondering if you could tell me a bit about this amp?  I've attached a few pics for your enjoyment.  I'm moving and will fire it up again once i get relocated.  Thank you for your time.

im using garage band and it records but the issue i have is that it doesnt record my code presets . it doesnt sound the way im hearing it from the amp. if i disable the plug ins it just sounds like electronic mess. if i record just a audio track from usb out from the code it sounds like an electronic sound and not the sound of my amp. i can hear it combine with my amp when i turn the plug ins on put its not what i want. help ?

I have tried to do this and the CODE 50 does not appear on my device list in my ASUS Laptop with Windows 10. Is there a workaround?

bonjour les experts,

J'aurai deux questions : je souhaiterai connaitre le vrai nom du câble Usb car pour en trouver un, je galère et j'ai dû un assemblage avec deux câbles

Ensuite lorsque je télécharge les pré configutations, elles sont bien en place et en direct mais une fois l'ampli déconnecté du PC, je ne les retrouve pas en cherchant via le bouton PRESET

Sinon, cette plateforme MARSHALL est superbe et merci pour le fabuleux contenu 

Alright y’all, this rookie here needs some advice and pointers regarding multi effects pedal and tube amps.

A little background…

I got my first tube amp about a year ago, love the thing. I slowly built a pedalboard with the basics (tuner, compressor, MXR classic distortion, tube screamer, holy grail reverb, Joyo delay, modded GE-7 EQ, JHS black box, chorus…). But I also wanted to start experimenting with multi effect pedals and patches, so I got a GX-100, exclusively to play around, tweak effects more in depth and see how it would be to have a one stop shop for all effects, albeit I have zero interest in amp modeling, I’m happy with my JCM800, just thinking about effects here.

I’ve never messed with multi-effects pedals, so here are my concerns…

1). With the GX-100 set up in a 4CM, I noticed that immediately all knobs on the amp itself are disabled, I’m thinking this is normal , since the control now lays on the Gx-100, not the amp itself (right?). However, isn’t there an option with multi effect pedals were I can still keep the raw sound of my tube amp and just feed it effects from my multi effect processor?

2). Considering question number 1 above. Is a multi effects pedal intended then for use on SS or modeling amps instead and not tube amps? Is it a complete disservice to a Marshall JCM800 to go and hook a multi effects processor to it?

If I can’t preserve the original base tone of my Marshall with the multi effect processor, it seems kind of a waste of time, the way I see it it would be stupid to hook a ME pedal trying to model an Amp that I already have, just to add effects to it. Am I missing anything? Am I way off here?

Would I be better off keeping the pedal board connected to Marshall like I had it and just get a modeling or SS amp to connect the GX-100 to?

I don’t gig, just play to backing tracks at home and occasionally get together with friends to jam together, but nothing serious or advanced...

Any input would be greatly appreciated!

Hi. I have a Code 100 combo and I have been thinking of upgrading the speakers. Should I replace the stock speakers in the amp, or would it be better if I just bought an external cab and bypass the built in speakers? I have found that when I deactivate the cab simulator in the amp I get a more “defined” and less muddy tone, but sometimes it just sounds like “an amp without cab”, the sort of scooped sound if that makes sense, even if the sound comes out through the amp speakers which should be considered a cab. If an external cab is better, what wattage should it be? Thanks!

I've been through the forums tried everything. bluetooth is on. iphone says connected. marshall gateway app says its not. Youv'e wasted my time. my money and patience. GET IT SORTED!!!!

Hello, which type of cable should I use for the Line In of my Marshall? TS or TRS? Does it matter?

Last week a thunderstorm rolled through while I was away for work and lightning struck my home and caused some damage to various electrical components in the home. My Marshall tube amp was plugged in to a wall socket. The amplifier will turn on but there is low volume and the drive channel won't switch off and there is no distortion either. Is this something where I can take it to a local Marshall retailer and have it shipped for repair or do I need to find a local repairman?
Thanks! 
Dennis

Hello, I bought this week a Marshall SC20CNB. Searching some forums, I noticed that there is a problem with Effects Loop in some SC20 units (all of them models? combo or head?), and that you have a solution to fix the problem.

I'm waiting for my amp to arrive next week, but already anticipating, does this limited series (Navy Blue) has this problem? Could you tell me just by the serial number?

As I live in Brazil, I’m worried if you have some authorized technical assistance here.

Kindest regards.