Questions
Showing results 61 to 80 of 3401
3

votes

0

answers

660

views

Hi

when will we get a new update to improve the Bluetooth Connection ?

 

asked 26 Jan 2018 at 03:22 AM

Beltz Herve (3)
3

votes

3

answers

1.3k

views

My CODE 50 will pair with my iPad, after some difficulty.

However, all it does is let me hear my email notifications through the CODE! It will NOT pair with Gateway ever!

This is a big deal because access to the amps controls is impossible without a remote connection. I'm sorry, but the control layout is a POS if you must rely on the amp interface. Who sits on their amp when practicing or gigging? The top position was a TERRIBLE IDEA! Fire the idiot(s) who came up with that disaster! The Bluetooth MUST WORK AND BE RELIABLE in order to make this amp useful!

I have followed your tutorials and cannot waste 30+ minutes monkeying around with this junk every time I attempt to use it! I have even deleted and re-installed Gateway with it paired with the ipad with no change.

Look, I don't care if you have Jimmy Page locked up inside this thing, if you cannot offer a solution for the Bluetooth issues, it's going in the bin!

asked 27 Dec 2017 at 07:26 PM

Scott Owen (3)
3

votes

0

answers

880

views

After some more hunting and pecking, I discoved how to get the listings to appear in My Gateway. I had to make sure my phone was connected to my computer then went through MENU on the Gateway phone app. After logging in, the app hilighted SYNC and once pressed away it went. I then managed to sort accordingly and save. The app does what it is supposed to do so now I have no problems at this point. Again, why isn't this explained in a document or tutorial...? Programmers and suppliers cannot expect users to understand their thought process without some clue here or there.

Regards.

 

edited 25 Nov 2017 at 10:00 PM

Dave Duncan (57)

asked 25 Nov 2017 at 09:16 PM

Dave Duncan (57)
3

votes

1

answer

700

views

Tell us what version we're downloading. Tell us what  it does. Give us all the info we need to make an informed decision about these amps and the firmware update s or expect us like I'm about to do make a fire and cook some burgers on the flames!

Do i understand correctly that if we update through the browser we only get version 1.3? Why? Why isn't that spelled out on the download page if thats the case. 

Thanks Dave.

asked 20 Oct 2017 at 07:58 PM

David Hudson (3)
3

votes

1

answer

1.1k

views

Where can we find out what is in the update and what changes there are?

asked 14 Oct 2017 at 02:37 PM

Arc Anjil (3)
3

votes

8

answers

6k

views

Hi. How to get firmware update v1.41? Checking in the browser not show any updates, Marshall firmware update utility show 5 updates to v1.41, but after updating on the screen of the AMP appears v1.11 and checking in browser proposes update firmware to v1.3

asked 14 Oct 2017 at 06:59 AM

Denis Moysienko (85)
3

votes

0

answers

1k

views

I have owned my Marshall CODE 50 for over 1 year.  My frustrating experience with the speed of bug fixes and feature functionality updates to the CODE Firmware and Gateway software updates is beyond compare of any combination of hardware and software product I have ever used as a consumer. I have been in the hardware and software business for over 30 years and my Marshall CODE has been an exemplar of how to offer a horrible software and hardware consumer experience. When I first bought the product I loved my Marshall CODE 50, then I grew to lament it with the slow firmware and software bug fix releases, functionality updates and poor support for the Mac. I do not blame the engineering organizations responsible for the firmware and software. I blame the management, this just breathes product management and executive management failure. Hey, here’s an idea! Try, giving away less equipment to “musicians” and also charge a bit more for the product and try and channel some of that money for *more* quality software engineering staff and management. Fender does a much better job. I have several Fender Mustangs. It appears Fender might have had a slight mis-step with the latest Fender GT Mustang, but they are rapidly pushing out bug fixes and feature functionality updates like crazy. Also Fender’s social and forum interaction with consumers about firmware and software updates and the release notes are much more transparent and forthcoming. Marshall can do better. Until then,  I will be doing my best to steer people clear of this product in person, in forums and social media until this has been rectified.

edited 08 Oct 2017 at 01:00 PM

Robert Birch (15)

asked 07 Oct 2017 at 06:02 PM

Robert Birch (15)
3

votes

0

answers

1.5k

views

While waiting patiently to see if / when the CODE100 amps. are going to be available I happened to look at the supposed specs. for the CODE100 on your (Marshall) website found here: https://marshallamps.com/products/amplifiers/code/code-100h/

I couldn't help but notice that the CODE100 will allow 5 x simultaneous FX to be used.  As we are all aware: this is not the case with the CODE50 and CODE25 i.e. only 1 x FX may be used.  Aside from the obvious physical difference and output between the CODE100 and the CODE50 and CODE25: everything else appears to be the same other than the number of simultaneous FX that may be used.  So my question is: is it not just a simple firmware update / upgrade that will allow for 5 x simultaneous FX to be used with the CODE50 and CODE25???  If so: could we have it please (or could we at least have some input or further information on this)???  In hindsight and as wonderful as I think these amps. are: it's starting to not make sense to me that I still have to purchase stompboxes if I want to use, for example, a compressor, additional distortion, and, say, an octave (pitch shifter) when all of these FX are actually included on the CODE50 and CODE25 but only 1 x FX can be used at any given time.

Regards,

Dale.

asked 11 Sep 2017 at 06:54 AM

Dale Paterson (104)
3

votes

5

answers

2.7k

views

THIS ISSUE IS STILL ACTUAL !!!  THE MASTER VOLUME ADJUSTMENT IS NOT LINEAR !!! PLEASE MAKE A FIRMWARE UPDATE TO SOLVE THAT !!!

asked 02 Jul 2017 at 08:41 AM

Eug Eugov (4)
3

votes

4

answers

2.4k

views

There's a noticeable bit of digital noise/fizz  in the output.  Fiddling with gain, volume, presence and resonance settings seems to help a bit.  Upping the gate settings only cuts it out when you're not playing, otherwise it pops back in as soon as you start, only now with sustain  and response issues associated with setting the threshold too high.

I've seen this issue noted on other boards, and the problem seems to be rooted in the signal processor. Does Marshall have a fix in the works?

 

asked 21 May 2017 at 05:06 PM

Peter McAteer (7)
3

votes

2

answers

4.4k

views

Just bought a Code 50...enjoying it but little surprised not to find the USB cable you need to connect the amp to your computer in the box, but hey ho. What type of cable do I need and where can I buy one?

asked 20 May 2017 at 05:56 PM

Robin Ashford (3)
3

votes

5

answers

1.6k

views

I bought a Code 50, brand new out the box. Runs perfect! No firmware upates have been applied. It plays great, sounds great, and does everything as advertised. Am i the only one that got a Code 50 thats not having issues. I also have a Boss Katana 100 2x12, and I think the Code 50 sounds way way better to my ears.

 

edited 03 Feb 2017 at 03:30 PM

Ruben Trevino (3)

asked 03 Feb 2017 at 03:29 PM

Ruben Trevino (3)
3

votes

1

answer

1.3k

views

So the amp is great and all, except for the noise introduced via the USB interface and the lack of user-made patches and stuff. So when can we expect a software update to be released? It's been quite a while since the amp was released and I would very much appreciate a fix. Also, will more amp models be added down the line? Cheers.

asked 23 Sep 2016 at 10:53 AM

Eugene Ooi (3)
3

votes

1

answer

3k

views

What options are available to replace the stock 4 ohm speaker that comes in the Code 50?  I would like to upgrade to a Celetion or something similar.  The stock speaker flutters at volume when using the heavy distorted/gain presets.  Any recommedations?

asked 29 Jun 2016 at 11:04 PM

Michael Malchoff (3)
3

votes

3

answers

2.3k

views

HI just got  a new (3 days old) JVM 205C and played it a couple of times then when I went to turn it on again it will not make a sound!

It starts and all the tubes light up but when you turn off the standby nothing happens and no sound at all comes out, not a click as if the standby swith is doing nothing.

I did read the manual about the FX loop button muting the amp without effects plugged in but I have tried everything I can think of so far, guitars, leads other power sockets but no go!

Anybody have any ideas???

Thanks

Mark

asked 27 Jun 2016 at 12:07 PM

Mark Pianca (3)
2

votes

1

answer

279

views

hy

marshall gateway app is not working with android 11 version

the bluetooth connection is in place (blue light is in on) but opening the Gateway App the connection to the amp is not detected

can you please give me the info to solve the issue?

i've tried with another phone with android 10 sw version and the app is working

I think the app need some update to fix this bug (my version is 1.5.5 )

please consider that android 11 will be the standard for the most part of your code owner in the world

best regards 

Luigi

 

asked 26 Nov 2021 at 08:26 AM

luigi pagani (2)
2

votes

1

answer

448

views

Hello, I bought a Marshall CODE 25 yesterday, and so far I love the sound and feel of the amp. But I am having the same issue that alot of people are having, I can connect to the amp via my phone's Bluetooth but the amp will not show up in the Gateway app.

I have tried everything in the FAQ troubleshooting guide, nothing works. I can play music to my amp but that's it. Feels like a problem with the app and not my phone.

Are you reading the forums, Marshall? You need to take a look at your app, seems like it has some compabillity issues, it's working for some people but not everyone. 

I have a Samsung Galaxy S8.

 

Please fix.

edited 28 Sep 2021 at 04:50 AM

Ruben Eriksson (2)

asked 28 Sep 2021 at 04:40 AM

Ruben Eriksson (2)
2

votes

1

answer

497

views

My brand new Code 50 is crashing after saving presets on amp. The firmware is the latest version 1.44. I applied the factory reset and the presets reset but neither were been helpful to fix this issue. After crashing, there is no output sound.

edited 13 Jun 2021 at 01:31 PM

The Persica (2)

asked 12 Jun 2021 at 12:33 AM

The Persica (2)
2

votes

4

answers

556

views

Hi,

Does anyone know where to find information about firmware updates for the Marshall Multi-room speakers? (Stanmore, Acton, Woburn).
Like a changelog or latest firmware date?

I want to find out if Marshall is even working at fixing all the known problems at all or if they just totally abandoned these products.

My current firmware: 

Marshall Stanmore Multi-Room 
Firmware: 1561616839
Chromecast v: 1.28.102057

Marshall Acton Multi-Room
Firmware: 1561617046
Chromecast v : 1.28.102057

 

asked 20 May 2021 at 11:27 AM

Kees Lina (4)
2

votes

3

answers

744

views

Hello Marshall Support Team,

I consider buying a Marshall Code 25 or 50, but I'm really concerned about the master volume problem with these amps, which has been discussed in length in this forum (see ? ? ? or ? ) [sorry,  seems the URL-links to the topics are deleted, the topics were "code-25---master-volume-issuses", "code-50-master-volume", "code-master-volume-issue" and "master-volume-marshall-code-50", all about the master volume knob, which goes from very low immediately to very loud].
In one of these threads you seem to acknowledge the problem and state, that your R&D team will look into this.

So here are my questions:
Is this problem solved with newer versions of these amps?
Does the problem show up regularly with all amps or does it affect only some devices?
Is there any chance to replace the Master Volume pot by myself  if the problem shows up after some time?

Thx in advance for you reply.
With regards - snoopy

edited 07 Mar 2021 at 09:15 PM

Snoopy GrandX (2)

asked 07 Mar 2021 at 07:28 PM

Snoopy GrandX (2)
Showing results 61 to 80 of 3401
Loading - please wait...