I bought Marshall CODE 25, connect USB cabel to PC, install ASIO4ALL driver, run Nuendo 4.3, driver Control panel show MONO IN - STEREO OUT, record fine but there is no stereo streaming from PC to headphones, only MONO. Everything is OK in Nuendo Audio Control Panel. I try with Media Player with MP3 files, same problem, only MONO. Try Abletone Live - same problem.
Is this normal for this amp, or mailfunction?
So my emberton turns on with no sound I can see all the lights and it connect But it doesn't play anything either I hope it's not water damage . I never put it in water I only touched it with wet hands Is there anyway I can hard reset it or something I couldn't find it on the internet
Just got a code 100 shipped to me today, opened it up pluged it in and no sound, plug headset in i get sound thru the headset but nowhere else, seams if i crank it i hear a faint sound from speakers tho, but otherwise any help ?
I recently bought a Marshall 2x12" Cab with Marshall Goldback speakers mounted, type SPK100, 8 ohms, 80W each. As Marshall does not make speakers I am curious who the manufacturer is. The speaker's cage does not look like a Celestion. It seems to be an Eminence at first glance.
Does anybody have any information? Thank you!
So I just got my CODE50 two days ago and yesterday was the first day I had to play around on it, and that being at a live rehearsal of all places. I didn't get to do much tweaking, but I noticed a problem with the EQ. If you have all buttons deactivated then the Bass Mid and Treble knobs do absolutely nothing, NOTHING... I tried using the Natural preamp thinking that maybe the EQ knobs are strictly digital and an amp or preamp needed to be activated to enable the EQ to function. When the Natural preamp was selected, however, the overall volume (master knob all the way up and the volume knob at 12 o'clock) was so low hardly anything could be heard. Am I missing a menu option to set the volume or something?
Also, I've saw a lot of people having trouble getting the Marshall Gateway app to connect to their CODE amps, myself being one of these people unfortunately, but I haven't saw anyone come up with a definitive solution other than 1. Updating the Firmware 2. Turn the amp and phone off then restart both of them and try again. 3. Delete the amps Bluetooth profile from your phone and repeat step 2. 4. Call Marshall support. I can get my Samsung Note 5 itself to connect to the amp (getting a weird message on my phone that says verify such and such number is the correct PIN for the Marshall amp but not having any further prompts on my phone or on the amp after tapping OK, but still connecting regardsless), but when I bring up the Marshall Gateway app and go into the menu to connect to the amp I can hit the scan button all day and it will NEVER find my CODE50. What the huh?!!! With all the other people I've saw on this forum having the same problem with the Bluetooth connectivity, you would think there would be a end-all-fix-all solution to such a massive problem. Has anyone heard anything or should I send this amp back for a refund while I still can?
Need a Replacement Footswitch for JCM 2000 DSL 100 head from 2003. originally had a 2 button footswitch. What models footswitches will work with it? Thanks
The new Stockwell 2 seems to come with an auto-standby mode, meaning it shuts off after between 5 min and 20 min (seems to be different from a phone versus a laptop?) even if the connection via bluetooth or jack-in is stable. Although the sound is nice for the size, the speaker is barely useful in settings where sound is not played all the time.
Team Marshall, can you please provide an option to define a custom time (let's say 2h) or completely disable the auto-standby mode either by a Firmware update ob by integrating the Stockwell 2 into the Marshall app? Thanks.
Hello, can anyone tell me which brand / model of speaker is used in code 25?
Hi, I am trying to register this product on your website but it keeps telling me there is no model number. How do I actually register a stanmore speaker?
Hi I have had this Marshall Code 100 for a few weeks now, mucking around with it to try and figure it out and finding it to be a little user unfriendly. What I want to do is to change a single preset to what it was originally (eg factory setting) without doing a factory reset and losing all my other changed presets. I cannot find any joy anywhere about this. Also, when I look at the list of 100 presets online (there are a few lists going around in chat forums and also in the gateway section of this website) I can only ever find the 100 presets that are on the phone gateway app and not the list that was originally on the amp (for example on my amp when I factory reset it, 00 is JTM Chill, 01 is "So American" etc, whereas my gateway library has 00 as EL34 Heaven and 01 as Plexi Classic). So I cannot find the actual standard amp preset list anywhere online or within the Gateway app.
My questions boil down to three:
1. How do I restore an individual preset to what it originally was (without performing a factory reset)?
2. How do I even know what the original preset was called?
3. Say I connect my smartphone to the amp via gateway and bluetooth. If you click on the arrow on the right hand side of one of the presets in the library, it takes you to another screen. In that screen it has an amp section and a library section, with 2 small boxes you can tick next to each. What is the purpose of this screen and ticking the boxes? Like what can you actually change on this screen is it just the name of the preset or can you replace a preset that is on the amp with one that is in the gateway library?
Needless to say I am very confused and was hoping to be way ahead by this stage. Please help!
I just ordered my CODE 25 but I couldn't find any info about bluetooth playback, only via input jack.
Is that possible? Thanks a lot!
Yesterday, when I tried to charge my new Marshall Minor II for the first time. Fresh out of the box it came in.
For a while the LED that was supposed to turn on when it's charging was off, but when it finally turned on, it started alternating between red and white lights every second or less. Also, every time it turned to white, it'd play the charging notification sound.
I left it there first, for about 3 hours, then the whole night, so it has already been plugged on the charger for at least 12 hours. But still, every time I take it off the charger, it shuts down and doesn't give a single sign of life until I connect it to the charger again...
Has anyone else had this problem? If so, is there a way to fix it? I don't think I'm able to replace it because it was given to me by someone else and they don't have the proof of purchase anymore.
I hope someone can help me and thanks in advance,
I'd really like the ability to roll back firmware updates. The tone of this amp has got worse with each firmware update I've installed. I wish I would have left it at the default when I got it.
The first firmware update I installed ruined the DSL, and 50's British amps, and now this last update has ruined everything else. All the presets I created sound completely different now. What a waste!
I'm really beginning to regret buying a digital amp.
i’d Like to know which fuse is the proper one to replace on my Woburn speaker?
and by the way, what can cause this problem...?
(can it be affected by near electrical products or a bad/defective wall socket?)
I have the following problem with my Marshall Stanmore (I) Bluetooth speaker:
Whenever I am wirelessly connected, the Bluetooth connection drops after 20 minutes — while playing music!
The surprising thing is that it not just happens randomly after 15 to 45 minutes — no, it happens suspiciously regularly after 20 minutes. I went and tested this with my laptop (4 times) and my phone (3 times) by writing down the start and stopping times, and the Bluetooth connection got interrupted (the music stopped) after 20 minutes each time. 7 times in a row. No exception.
• Yes, I have removed the speaker from all devices, then re-repaired them. Multiple times.
• Yes, the problem exists with all my devices that can send sound via Bluetooth (laptop, phone, desktop,). Those same devices have no problem to stream music to my Sony sound system or portable Bluetooth speakers. The problem only exists with the Stanmore.
• No, the Stanmore is not near a wifi router, a micro wave, a DECT phone or close to other Bluetooth devices. All of my other Bluetooth devices work perfectly fine. During my tests, the speaker and the Bluetooth source were about half a meter/two feet apart.
• Yes, I have had the Stanmore disconnected from power for an hour. Even a few days, actually.
• Yes, sound works perfectly fine via the wired connection (INPUT 1) and it doesn't stop after 20 minutes.
• Yes, the "STANDBY MODE" switch on the back is set to "STANDARD". (But surely no Bluetooth speaker would ever go into standby mode WHILE playing music anyways, right?)
• No, I am out unfortunately of warranty. The speaker looks great and hasn't been used that much. I also find that it financially doesn't make much sense to spend 130€ (max.) on a Marshall OOW repair.
• No, the Stanmore I is not compatible with the Marshall Bluetooth app, and there is no way for me to update the firmware (as far as I know).
• Yes, I can absolutely open up the speaker and post pictures of specific components, if someone has a clue about what capacitors or chips to look out for.
Additional info on the issue:
I experience no problems connecting via Bluetooth, from any device. I can start playing music — but after 20 minutes, the music will automatically stop. If I am streaming from Spotify for example, the player will just pause. The Stanmore stays powered, and the red BLUETOOTH light on the Stanmore is still on, but it appears a little dimmer than normally. I have found that pressing the SOURCE/WAKE button once usually wakes up the Bluetooth connection again, and then after a while, I can resume music by un-pausing on the laptop or phone.
The fact that this happens after a very precise operating time, sure sounds a lot like it could be standby-related. But the Stanmore is not set to POWERSAVER mode. And even if it was, it would only enter standby mode after a certain time if it wasn't playing anything. A speaker that goes into standby mode every 20 minutes WHILE playing music ... that would be ridiculous! And yet, that is exactly what I am dealing with.
Any ideas or clues for what to try or look out for?
I just got a Marshall TSL 60 head and am having trouble with the footswitch.
Of the five buttons: Clean - Crunch - Lead - Reverb* - FX Loop*
The Reverb and FX Loop are both latching switches and work fine. The Clean, Crunch and Lead switches are all momentary and there's some sort of digital logic switching going on on the board. The problem is with these switches.
When I turn the amp on, the Clean switch LED comes on. When I hit the crunch or lead switch, nothing happens (No LED, no change from clean).
I thought it was an issue with the switches, so I replaced them. Now Crunch and Lead still do nothing, but when I hold down the Clean it switches to Overdrive for as long as I am holding the switch. When I let go, it goes back to clean.
Anyone have any thoughts why the switches aren't doing their job? Could it be a fried transistor that's supposed to be controlling the logic switching that's going on (Anyone know a good way to test this?). Some more info on the footswitch...
[DIN Pin Guide](http://i81.photobucket.com/albums/j202/paperboy38375/Forum Pics/tsl100switchinginfo.gif)
[Another Board Pic](http://i281.photobucket.com/albums/kk224/chrisdrane/TSLInternal_zps056b5334.jpeg)
I bought the Major III bluetooth headphones but I have a big problem when connecting them to my windows 10 computer. My sound is terrible when using the headset. If I deactivate the hands free telephony setting in the device's properties it switches to headphones and the sound is perfect but the microphone stops working.
Is there a way to fix this problem?
Hello Marshall. My Code 50 was connecting the other day and tonight I could not get it to connect. I am getting a message similar to this: Can only control an amp you are connected to. Something similar to this. Like my phone is connected to another Marshall Code. I only have one Code amp. My phone is connected to the amp in my bluethooth settings and I see the amp in the Gateway app. I have tried to forget the device and then find it again. Turning the app off and restarting it. Even uninstalling the app and reinstalling it. Still getting the same error message. Advice? Thanks.
What options are available to replace the stock 4 ohm speaker that comes in the Code 50? I would like to upgrade to a Celetion or something similar. The stock speaker flutters at volume when using the heavy distorted/gain presets. Any recommedations?