After about 3 months of very light usage (home use, ~20 hours), my Code 50 developed a harsh noise problem: https://youtu.be/S2cTK8fsfTE. It's on every preset and can be heard via the speaker and when using headphones. I tried using different guitars/cables/power cords/rooms/outlets, reloading firmware, and resetting the presets to factory default; but the noise continues. Anything else I can try before I return it for replacement/warranty work?
Boa tarde pessoal.
Tenho o code 25 e ele não está conectando com o app Gateway. Ele conecta no blutooth do celular mas no app não. Alguém mais com esse problema? Se sim, como resolveram?
My 1974x amp is quiet when nothing is plugged into it, but as soon as I plug my intrument cable into the non-tremolo channel, I get this awful cyclic noise. Does anyone know what to do? I replaced the ECC83 tubes one by one (testing it between each tube replacement), but it didn't fix the problem.
Here's a video of my problem.
Which speaker jack is for the 8 ohm, the one in the very center or the one next to the 1x16 where the cabinet pluggs in? Their are 5 jacks, so counting from left to right which one is the 8 ohm jack ? Thank you.
I was expecting the two CODE amps to work together on USB, so I can get 2 guitar traces into my Mac in parallel. Unfortunately I'm disappointed to see that Mac will only see ONE CODE at a time. Looks like they both have the same device ID which creates issue on the bus?
Is this an actual bug? If so, please remove this limitation via firmware update because it would definitely make sense to have more than one CODE connected to the computer without needing additional hardware such a sound interface.
So about a year ago I got a footswitch for my Code 50, and when i first got it, it started banking backwards on it's own. I was able to stop it...until now. The worst part of it, is when i go to use the amp's tuner, it immediately exits because it thinks the button is being pressed. When it began a few days ago, I was able to press the bank button to increase the bank and counteract the issue, but now the bank button stopped working. Maybe I pressed it too hard or too much or something. I cant remember how I fixed it last time or whether or not the bank button worked, but all I know is this time it might be done for good. If anyone knows of this issue or has had it happen to themselves, please let me know how I can fix it. I dont remember all the presets that were saved to it, but I can remember a couple. Please help!!!
Just bought new Code 100H head. It has an 8ohm output. Can I plug this into the 4 ohm jack in Mono of Cab? Or do I have to use the 16ohm jack in Mono?
Ever since I connected a USB cable between my CODE 50 and set up this account I cannot get sound to come out of the speakers. My amp is all but dead. HOW do I reboot or reset my amp to make sound come out of the speakers when I jack my guitar into it; turn the unit on; slowly raise the Volume GAIN and Master volume and hope to play something?
Does anyone know? Thank you for your time.
where is my serial number located I dont see it on the tag on back?
Good day. Yesterday I bought Marshall Mode EQ headphones and ran into a problem.
Smartphone ASUS Zenfone 4 max, Android 8.1.0. When the headphone cable is shaken while listening to music, the volume on the smartphone spontaneously decreases. What can you advise?
Can I connect to my code 25 via USB to my RCA Voyager tablet cause I can't Bluetooth to work
Trying to find out when my Red series Marshall Super Lead serial # 08256H was manufactured.
Hi, I am for the most part a beginner, I have dabbled through the years and decided to give it another go. Anyway I bought the code 25 I always wanted a Marshall but after about a week the amp makes a constant ticking noise? Any thoughts as to why?
I understand that there is no `B' cab for the 1960TV, however, are there any options regarding Marshall making a compatible `B' cab - even if a custom build?
Many thanks
Just bought a Marshall code 100 amp . I was hoping to get a manual . Where can I get it ?
Can you please show me which jack i should use to plug my head into the cabinet. I have a new 2 weeks old, Marshall DSL 20 HR Head with the MX212RR Marshall cab. On the back of the head it has 3 jacks for to plug into the cabinet and i dont know which is the best. It has lines pointing to the OHM's but the lines dont line up with the different ohms and its hard to tell which one to use. Anyway of sending me a picture or explaining which jack i should use please. Ive looked every where, youtube, online googled and cant find any info on which jack to use from thr back of the head to plug into the speaker cabinet. Thank you
Hello,
When I tried to charge my new Marshall Minor II for the first time, for a while the LED that was supposed to turn on when it's charging was off, but when it finally turned on, it started alternating between red and white lights every second or less. Also, every time it turned to white, it'd play the charging notification sound.
I left it there first, for about 3 hours, then the whole night, so it has already been plugged on the charger for at least 12 hours. But still, every time I take it off the charger, it shuts down and doesn't give a single sign of life until I connect it to the charger again...
Has anyone else had this problem? If so, is there a way to fix it? I don't think I'm able to replace it because it was given to me by someone else and they don't have the proof of purchase anymore.
I hope someone can help me and thanks in advance,
Adan Castro
After the last update my amplifier knocks every 3 sec, when I turn on the bluetoof stops. How to restore the earlier version of the firmware, I will add that the connection bluetoof does not work the amplifier is just not visible to other devices, please help.