Hi All,

So I’ve been using a Marshall 1987X for a year now. About 2 months into use I removed the bright cap to reduce the hiss, feedback and aggression I was getting off the bright channel. 

I keep channels bridged and am getting a good loud classic bluesy tone from the amp that I definitely dig!

I want to have something to boost it with just ever so gently to get more sustain, a tiny amount of compression and a hair more presence from the sound. 

What pedal fits the bill? I want to keep away from overdrives and silicon chip based pedals

Cheers

Karan.

My MA 50C has an internal speaker that is at 16 ohms and the amp is wired for 8 ohms max.  I have a 2x12 cab that is at 8 ohms that I can plug in - BUT (and this is the question):  Can I leave the Internal speaker plugged into the amp (again, at 16 ohms) and STILL plug in my 2x12 cab (8 ohms) without doing damage or do I have to unplug the internal speaker before I plug the 2x12 in?  By my math (and this is always very questionable), it should be able to handle it because it will not make the amp go lower than the 8 minimum to get the full 50 watts.  I need another set of eyes/brain to confirm/refute.  Thank you in advance!!!

How  far can you turn this up wihtout blowing it up!? Code 50

Ive got a main  Heavy Metal Tone I use all the time. The volume in the preset is set to  1.8. I have it that low so it doesnt blow my Clean sound away when I click between the two. 

I was playing with a drummer the other day and I had the master volume up to maybe close to half and I was worried I was going to blow the speaker.

So How  far up is safe?

Hi.

Please can you (Marshall) tell me if the speaker in the CODE50 is a FRFR ("Full Range Flat Response") speaker???

Or is it an actual guitar cab. speaker (that may have been specifically voiced for the CODE50)???

Regards,

Dale.

P.S.

Of course anybody else's comments would be appreciated.

how can I show you 2 videos of the new and old code 100h head that show a strange sound coming from one but not the other
these videos were taken minutes apart and tested a few times
it sounds like a tiny fire alarm is going off with volume pushed to max and all other settings either in a preset or all down

I have a marshall dsl 100 head,I have a problem of no sound, the power supply is working fine,all valve tubes are working as well ,so I'm wondering what is the problem.

I have all my Rammstein Albums ripped straight from the cds and I cant play them back? the app keeps telling me it is crashing as soon as I hit the ok for the amp to play it back. this is my second code 100h that actually ahs working bluetooth. thankfully I was given a replacement but I now suffer from this condition. I cannot play my own owned music and mp3 files from Fl studio to my amp. I buy a 100 watt head and cant annoy my neighbors??? 

I cannot know some menu. for example, how touse a small icon that is described tablet mark and amp mark.

I want to know detail of Gateway Application.

How can I get the detail manual about application on tabet?

My CODE 50 will not connect to any of my devices.   The bluetooth on this CODE is not working.  This CODE 50 is proving to be a bad purchase.  

Surely there's something that can be done?   

My early 900 50 watt head is not as loud as it used to be. It has new power tubes and has been biased. What could be the issue?

Anybody have any good preset leads on some Lynch or any Dokken songs  Tesla also

I have an Origin 20H. When I rotate the tilt control clockwise, the amp produces a tone when an Archer Clean is connected to the input on the front panel and the Archer Clean is OFF.

Anyone else experiencing similar issues? 

pls im starting with this amp and i dont know how to import and save user presets in my amp