I want to buy for home use something like the type of https://www.bestadvisor.com/best-headphones. Or is it better to buy a marshal from the same price category ??

Today I tried to play my Marshall code 50 and noticed that there is acutally no sound coming through.
I already changed the cable to make sure that the cable is alright.
I also noticed that there is no Headphone sound and the amp tuner is not working neither. 
The speaker makes the normal light buzzing noise when turned on, so I assume that it is not about the speaker. 

I did a firmware update just now, but I didn't help. 
I really don't know what to do anymore. I barely played the amp and never transported it neither.
Why it is suddenly not working is a mystery to me. 

If you have any advice please let me know. 

Hi,

I would like to knwo if there is a way to sync the MY GATEWAY presets and the Marshall CODE presets all at once?

I came here and downloaded a bunch of presets from the comunity and now there are like 30 presets in my phone, but these presets are not in the amp memory.

I could go one by one, saving the preset on the amp memory but I want to know if there is a way to do it all at once.

One click and all the app presets are equal to the amp presets

thnaks in advance guys

Hey,

the majorIIbt does not pair th the code25, what is wrong? Both blink blue, then the headphone stops blinking while the amp continues. Any knobs to push?

Thx from germany, Andreas

If I want to plug my 100h into my PC via USB, does it still need a speaker load or can I use it without a cab connected?  

Hey there! 

I just added a JCM 2000 DSL50 to the family and I'm now re-biasing it, as the previous owner set it to something strange like 30mV. 

I know, most sources in the www advice to bias it around 45mV, but I found it to sound best with one Tube at 39mV and the other one at 38mV.

When I set it higher the single notes in a chord (talking about the drive channel) tend to become "loose" and seem undefined. 

Is there anything that speaks against setting it to 39mV, could it be too low? 

I don't want to "miss" anything soundwise and just the fact that so many people advice to turn it up to 45mV makes me uncertain about my own ears.

Thanks! 

Kevin 

Hello, 

Am I only one who has to do "forget this device" from my phone each time I have to connect my amp to my mobile phone using bluetooth?
Or am I doing something wrong? 

Best regards,

I bought a CODE50 2 months ago, and while I really like the sound, it generates cracking/tearing/popping sounds when I apply (even small amounts of) overdrive when I touch a string with my pick/plectrum. I use the JCM800 emulation with low gain and low presence. I have also tried other AMPs such as the JVM. Plexi or Bluesbreaker, but that does not make any difference. It occurs with a BOSS Overdrive OS2 pedal and also with the ODR that is build in, also at low levels.

It happens both with my Fender Stratocaster and my Epiphone Les Paul. I also tried several diffenent plextrums, for example the Dunlop Jazz III, Dunlop Tortex, Fender medium, light and heavy and a few others, but that does not make any difference.

I opened the back of the combo so see if anything touches the speaker that could explain this sound but that was not the case. Normally I like a bit of pick attack sound, but this noise can be so loud that it overshadows the sound of the string, almost like a series of explosions. When I switch the overdrive off, this noise effect is gone.

What could be the reason for this ?

I was just curious in Marshall ever had any contests where you might be able to win some gear? I know your product is so revered and desired that you probably don't need contest to promote your outstanding product. It's just most regular players can't and never be able to purchace a Marshall amplifier.

I bought the footswitch and the Marshall Code 50 a few months ago. Both working fine until doing a gig  last evening, I hooked up my footswitch to the code 50 with the lead that came with it. No lights showed up, but the amp working fine I tried changing with a different lead, and the footswitch still no lights. The footswitch won’t work. Anyone out there has a similar issue please. Any suggestion please? Thanks in advance

Hi,

Why don't you have a Windows App? For me (and I believe for many other users) is really annoying to control my Marshall Code using cellphone or mini tablets.

I really think it would be very welcome an App for Windows, so we could use our notebooks or lap tops to control presets and tone of our Marshall amps, under a better interface, bigger screen and together with other music software.

Otherwise, I am very satisfied with my amp.

Regards,

Ed Silva

I can use a Boss ES-5 to switch between Clean/Crunch/OD1/OD2 using program changes but sending MIDI CC#13 for the loop state works sometimes and CC#14 for the master volume select never works. Is anybody able to use Boss ES-5 or ES-8 MIDI to control the master volume select and loop state?

Hello,

is it possible to connect 8 Marshall 1960AV cabinets to a Crest Power Amp that has 2 8ohm outputs?

Thanks

Has anyone tried using the Voodoo Ground pedal to operate the JVM410c/h?

Hello, I recently purchased a used Marshall Amp /HalfStack model 8100 ValveState 100 watt head with a model MG412 , A  Cabinet. the amps out put is 100watts RMS /4 ohm and the cabinet is 120watts RMS /8 ohm is this a problem ?

Hi all. I recently bought a DSL20 brand new and something is up with the effects loop. For some reason, when I turn it on, the volume drops way down and you can barely hear it. Any idea why? I've only owned it for a couple of months and the only thing I have running through the loop is my DD-7 digital delay.

tring to find out how i can control my 100h code amp using the gateway app but cant find out how

what to do if my bluetooth is not working when I try to search for it on my phone through the app or any other source. its jsut not there like the bluetooth was never a thing on it. this is the first time ive tried to use it and I think it picked it up once and did nothing else but show it was found. then never again. what do I do? it like it was never a part of the product

Is the programable 91009 going to work properly (AS the app does not), does it come with a cord, am I going to have to fight it as I do the app....Also, when are you guys going to fix the Gateway app. Don't give the same "we're working on it......blah, blah, blah....."And it's NOT MY PHONE.......YOUR APP is the ONLY APP I HAVE A PROBLEM WITH!!!!!!FIX THE F*^#ING APP!!!!!!!!