hola banda quiero saber cual es el programa de marshall con el que s epuede editar presets, a demaas de como ocuparlo como interface ,tengo el marshall code 50 

Hey everyone, I wanted to know did that happen to anybody else? Is this a common occurrence?  Or  are my marshalls just fake?

Hi, maybe I'm missing something, but I don't see anything that shows you how to upload a patch to the My Marshall website. 

My Acton 2 Bluetooth speaker is plugged in and is in discovery mode, however when it is added and paired to my Windows 11 PC, "Battery is 0%" is displayed and audio cannot be played, We've already updated the BIOS and downloaded the latest Bluetooth device drivers for Windows 11 but connection still fails.

I have a JVM410H and a 1960a and 1960b 4x12 cabinets.  I have TRS cables and how do I connect both cabs to the head with out messing up something?  Do I have the right type of cables?  If not, what should I use? Thanks

Clean Channel 1, FX Loop and the 6 Button footpedal stopped working entirely. I cannot switch to clean channel with the button on the amp either. Same for the FX loop. It was working fine last saturday 2/3/24 and by Monday this happened.

Channel 2 OD both Green and Red work fine and sound fine. Both Master Volumes work and the EQ section works. 

It's literally stuck on channel 2 and the FX loop and footswitch do not work.

Morning

I am wanting to set my number three pedal on the footswitch of my Code 50 as my tap tempo across all presets. Is this possible, or do I need to do it per preset?

Also - if you can please run me through how to do this.

Alun

always say client credentials could not be retrieved

Hi there! Proud owner of a 50th Anniversary DLS1C. The serial is M-2012-39-0177-2 but the registrstion site says thats wrong?

Can you veiryf that serial?

Thank you!!

Is it possible to transfer presets from my samsung  galaxy s23 to my code 25 via Bluetooth?

USB connection is broken and "Check USB" shows in the window.

How do I operate the amp?

It's not all the time. But When I make an oo sound, like if I was singing about the "moon", it buzzes on the oo sound. Other than that I have not noticed any problem. Could a speaker problem be so narrow? Or might it be something else? 

Any guidance on things a noob like me can safely look at before I haul this off to a professional?

Hi,
My Code 50 sounds cold, lifeless, scratchy at room volume. As soon as it is turned up, the sound comes to life. Is there a way to improve the sound when it is set to low?

Hello,

I just bought a DSL-1H power amp head. I intend to use my old amp which is broken as a speaker but, 
the speaker (Celestion G12M-70) is 4 ohms. So  I have to change it to 16 ohms in order to be compatible 
with the DLS1H. 
1. What type of speaker would you recommend?
2. Otherwise, what marshall cabiet model for this small amp power ?

Thanks in avance
Regards Philippe (From France)

What are the items addressed in this update?

Hello,

All my best wishes to the Marshall team for this new year 2024 !

It's a pleasure to contact you !

My English being very approximate to express my requests, I will continue in french, ..., sorry, ...

Je possède depuis longtemps (Années 90) un ampli de puissance Marshall 9200. C'est un matériel de très bonne facture et aux qualités sonores exceptionnelles. Il développe une très forte puissance en live !

En amont du 9200 j'ai un préamplificateur Marshall JMP1 (avec un processeurs d'effets dans la boucle send return du JMP1).

En sortie du 9200 j'ai 2 cabinets Marshall1912 de 8 ohms.

Cela fait un moment que je ne l'ai pas utilisé. Je souhaite re-mettre cette configuration en ordre de marche !  

J'ai cependant quelques questions que je ne me suis jamais posées auparavant sur son utilisation.

1ère question : Sur chaque canal (A et B) du 9200 il y a possibilité de brancher 2 cabinets avec le câble renforcé adéquat, soit 4 HP de 8 ohms sur les deux canaux. Est-ce que c'est bien ça ?

2ème question : Pour me permettre de répéter à la maison sans créer de nuisance à mes voisins, tout en profitant de la chaleur des lampes sollicitées à une bonne puissance, j'envisage d'intercaler un atténuateur de puissance entre une seule sortie du 9200 et un seul cabinet 1912. Est-ce que c'est possible sans endommager l'ampli sans 2ème cabinet 1912 ? 

Par avance merci  pour vos réponses,

FRED

 Hello:

We are new to amp and cabs and need some help with some test results we're getting from our AVT150HX amp connected to our 1960A cabinet.

We included images from the back of the AVT150HX amp and the page in the manual of the 1960A cabinet that outlines the use of the connections panel on the back of the cab.

Here is a summary of what is happening.

1. When we run a speaker cable from either of the two output jacks from the amp to the #3 connector on the back of the cab, we get no sound. This happens whether the cab is in mono or stereo.

2. When we run a speaker cable from either of the two output jacks from the amp to the #2 connector on the back of the cab in stereo mode, we hear the right-side speakers clearly. We also think we somewhat hear the left-side speakers, but that may be bleed we're hearing from the right-side speakers. Not sure. It's a bit hard to tell because the sound is very muffled and not as loud, but it does seem like some sound is coming from the speakers.

3. When we run two speaker cables from both of the output jacks from the amp to connectors #2 and #3 on the back of the cab in stereo mode, we get the same results as #2 above.

Does this mean that the left-side speakers are disconnected or damaged somehow? Or are we making a mistake in the way we are making the connections?

Thanks in advance for the help.

-Eli

My Marshall III button doesnt work so it doesnt display the blue LED light and i cant connect it to the app

I just received a new DSL100HR. When I turn it on I hear a constant 720hz ring directly from the amp. 

It does not change when I move any knobs, have it plugged into my attenuator or speaker (16 ohms), or switch outlets. It happens on low, standby and high settings. 

I found a YouTube video (You can hear the ring @1:12seconds) and he describes the same ringing but apparently that amp also had volume issues that mine (to the best of my knowledge) does not. The amp sounds good but I haven't played a Marshall before.

Should I be worried and return the amp?

YouTube link was necked but it it is titled "Marshall DSL100HR Keeps Blowing Fuses - Tales From The Repair Bench"