I am wondering if anyone has a preset that will work for using an external effects pedal into my Code 50? I only want to run the external effects (distortion, reverb, delay) and nothing fromthe amp itself. What I am seeing is that even with all effects (amps, modeling, etc.) turned off on the Code my pedal into it sounds like garbage. Very muffled, bassy, and muddy. I have the EQ on the amp set so that the bass is all the way down and mid/tebble are all the way up and it still sounds terrible. I don't want to have to edit and mess with every patch on my old Zoom GFX8. The pedal doesn't sound like this into my old 40 Watt Fender bassman.

Any advice on setting up the Code to sound good with external effects would be greatly appreciated.

Hi, Is there a way to reduce the power on a Code 25 from 35w down to 5w or 1w like you get on modelling amps from 'other' manufacturers?

To use as a practice amp in my home, I'm having to set the master volume and volume controls really low on the amp and still dial it back on the guitar to the point it is affecting the tone of the preset.

Since this was not obviously available on the top panel, I wondered if it was available via the app but I can't find it if it is.

Thanks in advance.

I am wondering if I am able to simply rearrange the order of the pretsets on my Code 50 without necesarily cahgning the pretset itself?

Hi

on my Code25 there is very loud backround noise. When I set some preset (at least some with some gain on it) it starts infernal humming and rattling. If I turn master volume up, it increases and if I put it down, it decreases. It’s extremely annoying and infact makes me not to use amp at all.

is this something it should be or is my amp faulty?

Hello

I have bought the code 50 from a friend that has added his own presets and I would like to bring it back to the original presets state

How do I do that

Thank you

Hello, I need advice. How and where do I register Amplifier Code 100?  You can register footswitch PEDL 91009, PEDL-10025 GV-2 Guv'nor plus, PEDL-10026 BB2 Bluesbreaker, Headphones MONITOR ?  I live in the Czech Republic, where I bought the goods in e-shop muziker.cz.

Amplifier in combination with PEDL 91009 is really supreme . I have a month and I play all the time, much better than FENDER.

For my use bad Windows software. I'm using CODE Patch Editor, there's a lot of options and there's nothing extra. Is there any other code software? Where I can edit and create new presets, play Backing Tracks. Similar Fender FUSE. I would like to buy it :-)                                                        

Thank you in advance for your answer.

Regards, Michal :-)
                                                                                                                                           

                                                      !!!!!!! MARSHALL FOREVER!!!!!!!!

Hello, 

i switch through my presets with  the Marshall PEDL-91009, however, this pedalboard only has 3 switches and a bank switch, however i would like to have a pedalboard with more than 3 preset switch button for faster recall ... is there a solution (maybe via MIDI) , or a compatible footswitch that i am unaware of? 

 hello,

I’m having problem with my CODE25 amp knobs( bass, treble, volume, gain, middle) like whenever i change bass , treble or anyother knobs changes by itself by 0.1-0.2 . And while changing one  knob, another knob presets values flickers in between. 

I want to know if anyone else having the same issue or there is problem with my amp or its a firmware glitch..

please help me...

Hey all - new to the forums, new to Marshall amps and had a few questions about the Code 50 I just ordered that will be here in a day or so.  I have played my guitars through my buddy's Code 50 and am familiar with editing the patches, tweaking the tones and getting the sounds that I want from the amp to fit my playing style.  What I am not familiar with is the use of footswitch and any Midi capabilities it may have.

1) Can one use just a regular on/off type of old school footswitch to turn an effect or amp on/off or initiate a patch change?  I have several old school footswitches I have successfully used on many different amps, albeit older amps, and it has always worked.  Curious since the Marshall footswitch actually holds presets if anything like that would work.

2) As far as Midi goes, I come from a Line6 multi-effects world and know that many of their multi-effect units have the capability to control effects on/off/parameters and patch/bank switching via Midi commands.  Does the Code software have anything like that if hooked up to a PC/Mac running a DAW that has the capability to send midi control commands to change patches/effects realtime during recording/playback.

Thanks for any input and excited to get this amp.  I am a player of over 30 years and have only ever played through Crate amps for the past 20+ years that have finally given up and the cost to repair is more than new.  Bash Crate all you want but they were loud and proud and with the right EQ/effects loops made some damn good musical sounds.

Hello from Ukraine, Marshall team!

Can you add in the next update, if it will, fuzz the pedal or create a preset with fuzz sound.
Thank you and apologize for my English.

Hi,

When I connect Phone via bluetooth, I can not see a presets, only "tab to sync" when I tab  it is shows this one and one or two more, but the rest is still tab to sync. Next connecting and all presets list is tab to sync again. Code do not want to synchronized with gateway. Do you have any idea how to change that? 

I have a Code 100 and my instructor has Code 25 amps.  I neeed a consise explaination of how to copy a preset from a Code 25 to my Code 100.  So far, the tutorials and FAQs have been more confusing than helpful.  I have the Marshall Android app and can connect to the Codes but have not method of copying setup from one to another.

Can anyone steer me in the right direction?

Thanks!

The problem is that when I put the distortion pre fx my amplifier does not give the sound even with any preset, the other effects work correctly only the distortion does not, however when I connect my headphones I get the distortion sound but without the headphones it sounds

Hi I just bought a code 50 and when i try to plug USB cable with my computer (mac pro), evrytime i saw that so it is impossibe to change preset. 

I have the code 100 digital combo amp. Can someone try to match michale Angelo batio’s tone? Preferably the hands without shawdow tone album. Not the classic mab sound from speed kills. Thank you 

Got my amp, Code 100 combo and loving it, lucky to have a present of the new PEDL CODE Footswitch.

Being a bit of a noob to this new amp technology, I have managed to save a  preset to the pedal, but no thanks to the instructional video mind you, which misses out the essential part that you are meant to press store on the amp and press the location on the pedal at the same time. There I was pressing the footswitch like it says in the video then trying to store. Very ambiguous instructions there, not clear at all.

However, one question is, once I turn off my amp, are the settings on the footswitch wiped out or are they stored until I want to delete them?

Also, it appears that I can only store to the pedal from the amp. So what if I'm using the amp in 'blue' mode from a hand held device?

 That doesn't seem to work for me (using my preset from my handheld device and storing to the pedal that is) as it keep defaulting to an Amercian preset.

I may be doing something wrong, therefore I thought I'd ask the question, rather than just pull what little hair I have left out in frustration.

What are the limitations on the Code pedal? The documentation is woefully inadequote IMHO. The suppport video being just as poor.

I know the issue, it's software designed by software developers, with no end user experience being considered as opposed to using a UX team during development.

We either need more indepth clear and concise instructions, or a new video showing a detailed example how to save a preset (not just a voice over while looking at flashing LED's) and whether we can save, not only from the amp, but save a preset from the handheld device and store them for later use.

Sorry if the above is a bit of a moan, but if nobody moaned nothing would be done.

If you could answer my points above, that would be helpful.

Thanks

C.

Hello. I find out what the body of the combo is cracking and not the speaker itself at a volume of 20% or more. This defect is even on the clean guitar sound (All presets and FX off). However, the sound from the headphone output is great and without any defects. It feels like a badly-assembled hull combo. What to do with this? Have you encountered such problems? I attach a video. https://drive.google.com/drive/folders/1ItBycqPpDgfb10PJdC3haA5w-OeJ1hD0

How do I get the user presets that others created on to my CODE. The app only shows what is onboard the amp itself. I have saved some on the site but can not get them to the phone nor can i see them on the app at all.

I just bought my code 50 yesterday. The master volume is a real problem, I may have to return it just because of that. We can adjust the volume, but the second you change a preset it goes way too loud again. Even if I were to modify each of the 100 presets manually (which I am not in the mood to do), when the next firmware update happens those presets will be overwritten with the factory reset so back to square one.

Marshall, can you please give us a timeline for this? I have 30 days to return this thing to the store, I need an answer because I do not plan on living with this issue forever, maybe I will swap if for a Fender or Line6 or something with quicker response time from the manufacturer if need be...  quite frustrated and only used the product for 30 minutes. 

I got a Marshall Code 50 a few days ago. It is so much more than I expected. There are more than enough presets to mess with. Some are pretty crappy, but there are abunch of good ones worth tweaking. I've read a lot of comments saying that the amp is crap, the presets suck,etc  With so many editing options available, if you can't find the tone you want, you shouldn't be messing with modeling amps.   There is plenty of power for my needs, and seems to sound good and consistent through a large volume range.

The stuff I don't like:

1) Why couldn't you use a 1/4" headphone jack instead of the mini?  

2) Why couldn't you use a USB normal sized plug instead of miniUSB?  You didn't know that miniUSB is almost prehistoric now? I had a tough time finding an adaptor here in Sao Paulo.  If I can't easily get ancient technology here in Brazil, the connector must be extinct in the real world.

I've started messing around connecting the amp  to my DAW Logic pro and recorded some stuff. It's got potential