Las teclas funcionan, la función se activa, pero jamás se escucha!! Me gustaría saber que pudo haber pasado...ya que funcionaba bien. Gracias

I recently bought the Marshall code 25. I have a constant interference problem which makes the amplifier unusable.

There are crackles, after trying several places in my house I realized it was because of the wifi. And if I remove the wifi I hear a radio on my amplifier.

Does anyone know if there's an adjustment to be made or is the amplifier defective?

Salve, ho un Stanmore 1 una volta fatto l abbinamento non riproduce il suono cosa può essere? Grazie 

Is it possible to transfer presets from my samsung  galaxy s23 to my code 25 via Bluetooth?

Ive just bought a second hand jcm900 4102 combo. its from about 97/98. its my first valve amp, and when i brought it home i had a look round it, and noticed that two of the power tubes had cracked, so i changed all 4. all the preamp tubes are fine. but even though ive just changed them, there is no sound coming out of this amp at all, not even a crackle. HELP!!!

Tried to update but I just get the screen  

CODE : Restarting

Installing firmware - please wait

Restarting in boot loader mode...

and then it just hangs.  Do you guys have any idea what I'm not doing?

Continuing with the topic of balance and volume levels for rhythm guitar and lead guitar in the same song using foot controller PEDL-91009. I understand that the best recommendation is, for example, in the same bank like Bank A1, to have preset 1 for rhythm guitar and preset 2 for the lead guitar solo? It's just very difficult for me to build everything in the same preset with balanced volume levels. I would like to find practical lessons (videos, YouTube) on this topic, examples of building presets with different volumes for the same song. I hope you can suggest a variety of information. I am a guitarist in a live band, and when it's time for the solo, I don't know how to solve the problem. I tried using a booster pedal, but depending on the gain of the amplifier, I can notice that the booster doesn't have any effect. I am very lost on this topic and with controlling the Code 100H in this aspect. Thank for your suggestions and help.

Just got a DSL 20c. When I plug the headphones into the emulator jack and put the amp on STB i don't get any output. what am I doing wrong?

What can I do? The firmware update stopped at 97% and the Marshall Code no longer works! Unfortunately there is no correct help on the community! I've tried all of Marshall's suggestions, but Marshall Code still doesn't work! Marshall Code and Mac is not compatible. Can anyone really help? Marshall's software engineers definitely can't do it. I call that; big shit!

Hello,

All my best wishes to the Marshall team for this new year 2024 !

It's a pleasure to contact you !

My English being very approximate to express my requests, I will continue in french, ..., sorry, ...

Je possède depuis longtemps (Années 90) un ampli de puissance Marshall 9200. C'est un matériel de très bonne facture et aux qualités sonores exceptionnelles. Il développe une très forte puissance en live !

En amont du 9200 j'ai un préamplificateur Marshall JMP1 (avec un processeurs d'effets dans la boucle send return du JMP1).

En sortie du 9200 j'ai 2 cabinets Marshall1912 de 8 ohms.

Cela fait un moment que je ne l'ai pas utilisé. Je souhaite re-mettre cette configuration en ordre de marche !  

J'ai cependant quelques questions que je ne me suis jamais posées auparavant sur son utilisation.

1ère question : Sur chaque canal (A et B) du 9200 il y a possibilité de brancher 2 cabinets avec le câble renforcé adéquat, soit 4 HP de 8 ohms sur les deux canaux. Est-ce que c'est bien ça ?

2ème question : Pour me permettre de répéter à la maison sans créer de nuisance à mes voisins, tout en profitant de la chaleur des lampes sollicitées à une bonne puissance, j'envisage d'intercaler un atténuateur de puissance entre une seule sortie du 9200 et un seul cabinet 1912. Est-ce que c'est possible sans endommager l'ampli sans 2ème cabinet 1912 ? 

Par avance merci  pour vos réponses,

FRED

Hi is the Silver jubilee mini 2525h auto biasing? Can replace the tubes "plug and play"?
Thanks for the help

Bonjour

Quelqu'un aurait il la notice détaillée du DSL 5 CR s'il vous plaît?

Merci d'avance

My Marshall CODE 50 presets button is not working anymore, anyone can  tell me  what  part I need to buy to fix it ? 

I have been wanting to get the kilburn II as it fits my requirements and has great sound quality but the speaker's gonna turn 6 years old this year and there's no news about its successor so should I wait for kilburn III or just get the older one at a discount (around 200$)

Morning

I am wanting to set my number three pedal on the footswitch of my Code 50 as my tap tempo across all presets. Is this possible, or do I need to do it per preset?

Also - if you can please run me through how to do this.

Alun

ciao a tutti,

ho appena acquistato un Marshall MG15 Gold, ma appena lo accendo (anche senza cavi collegati) si sente un fruscio di sottofondo. E' un difetto di fabbrica?

My MG15HFX volume knob cuts in and out when I adjust the volume? Gives a static type sound and gets really loud or really low? Any help would be appreciated 👍

I just haven't been able to choose 3 presets and save them on the 91009 pedal. Could you please help me out with step by step instructions to be able to do this. I just want to be able to pick 3 presets on the amp and have them saved on the 91009 pedal. Nothing I've tried works.

HELP PLEASE!

 Hello:

We are new to amp and cabs and need some help with some test results we're getting from our AVT150HX amp connected to our 1960A cabinet.

We included images from the back of the AVT150HX amp and the page in the manual of the 1960A cabinet that outlines the use of the connections panel on the back of the cab.

Here is a summary of what is happening.

1. When we run a speaker cable from either of the two output jacks from the amp to the #3 connector on the back of the cab, we get no sound. This happens whether the cab is in mono or stereo.

2. When we run a speaker cable from either of the two output jacks from the amp to the #2 connector on the back of the cab in stereo mode, we hear the right-side speakers clearly. We also think we somewhat hear the left-side speakers, but that may be bleed we're hearing from the right-side speakers. Not sure. It's a bit hard to tell because the sound is very muffled and not as loud, but it does seem like some sound is coming from the speakers.

3. When we run two speaker cables from both of the output jacks from the amp to connectors #2 and #3 on the back of the cab in stereo mode, we get the same results as #2 above.

Does this mean that the left-side speakers are disconnected or damaged somehow? Or are we making a mistake in the way we are making the connections?

Thanks in advance for the help.

-Eli