Hi, anyone can help? my Marshall Stanmore Bluetooth Speaker stop working. The red power light is on but no sound coming out, neither via the Bluetooth connection nor the input 1 and 2 with audio cable. I can still connect the speaker via Bluetooth but there are no sound coming out of the speaker. Any idea what's wrong? Please help!

I have a Marshall Origin 50c. I was wondering where the sweetspot is for this amp. I have my gain on 6, my bass on 2 my mids on 3 and my treble on 4, tilt is on 6 , presence is on 7 and master is on 2. I use it mostly for clean tone, then use my distortion pedal for the distortion that I need. I am a at home guitar hobbiest, and would like to know where the sweetspot is for this amp.

My pedal one day works fine, other day don't work at all!? I don't see any hardware damage. Please help me. I don't know what to do! :(

Hay alguna fecha estimativa para la actualizacion del firmware 1.45? ..cuando  estara disponible?

I bought a brand new  JVM 410H a few years ago and recently the fuse (fs6) blew. The fuse says it is a T1AE 250VP and I am having a difficult time finding a fuse that have these exact ID numbers. I can find T1AL 250 fuses....Are these equivalent to use?

How to stabilize the connection between amp and android device .

When I first synchronize amp and gateway app it stays about 20 seconds and cut. I've tried many things as deleted gateway and restart  but nothing seems good. 

What can I do

I need manual for code 100 combo

All lights stay on and nothing on the display when powered up. Has sound with all effects on. Buttons will not respond when pushed

Hello y'all,

I've been having a problem with JVM 205Combo.
During corona-lockdown, when we were not allowed to rehearse with the band, I had took my amp home with me....
As I'm always curious to find other sounds, I started experimenting with connecting other speaker cabs to my JVM. But, as I later discovered, the cable I used was no good and I think I blew up the main amplifier. I looked for the fuse, for it seemed logical to me that the fuse was blown, but couldn't find it. I also have a JCM 800 2205 head, a JMP MK2 2204 head and I've been having a JCM900 4100 head in the past. Now, all these amps were fused, so if anything went wrong, it was just the fuse that was blown. In fact, I've experienced that!
But no fuse on the JVM....is that correct? Because if it is, my problem is bigger than I thought. In that case, what was blown instead? The output transformer? My tubes?

I hope somebody can help me out on this one. And I promise never to experiment with other speakers or whatsoever.

Thnx anyway!
Cheers!

Trying to buy a Marshall branded dust cover for my SC20H Amp head.

Any idea who sells them? 

Have searched high and low without success.

Thank You

Hello,

I just bought a new Marshall DSL40CR last week, and when I have been playing on the low watt setting for about 30 mins, the volume drops in and out. I haven't experienced this on the high watt setting...yet. is there a recommended EQ or other setting configuration for the low watt setting to help with the issue of the volume dropping in and out? I have switched out cables, guitars, not using any effects or speaker cabinet either.

Thanks,

Ed

Hi, I'm wondering if anyone can point me in the right direction with this amp.  I genuinely love this amp, however it's had an issue since purchasing it second hand and clearly had a lot of repairs/bodges through its life.  Originally it would pop fuses so I changed the valves and set the bias and all was working apart from the serial FX loop.  I opened it back up and removed all the connections and then used the schematic to put them back.  I noticed that the serial loop was now working but the parallel loop wasn't so I assume one of the connections was the wrong way round originally.

I would love to get the parallel fx loop working again (even though I don't use it very often) but not sure where to look and what to change first.  I've replaced the sockets for both the serial and parallel loop with no change (serial loop works, parallel doesn't).  Is there any caps, resistors or diodes I should be looking to test or change and if so which ones?  Is anyone familiar with the schematics and can point me to the area I should be looking at to resolve this issue?  Thanks in advance.

Kind regards,

Rick.

Hi, could someone give the que how to reset Marshall monitor II ANC headphones. The way that Marshall's manual suggests doesn't work.

Thanks in advance!

I got a Marshall mg15fx couple weeks ago but my store button doesnt work. I dont know why. Can you help me?

Hi!
Just bought a Marshall emberton. I did connect the speaker to my iPhone (iOS 14.7.1). It starts playing but after 10 or 15 seconds it loses the connection and the bluetooth lighy on the speaker starts flashing.

Can you help me, please?

Thank you!

I borrowed a friend's mini USB cable a couple months ago to plug my CODE25 into my laptop and it worked just fine. I got a new cable today and tried plugging my amp into my laptop and the following notice popped up;

If anyone has any idea if it's a cable, laptop or amp issue, I'd appreciate the help. Thanks in advance.

Hello,    New amp I procured and I am hoping to get some Q's answered regarding. 

It did not come with a footswitch and being new to all of this I do not know why I need one or which footswitch to get ????

Also, I was told by the original owner that it is quite than it used to be and may need a new tube.   Also do not know which way to go with this ...   

Last point is when switching over from clean to overdrive it is buzzing and I am not sure why...

After hours on youtube and reading the instruction manual I am even more confused. 

Thanks in advance for comments/advice. 

Wade

I ordered a DSL40CR in January and it was amazing but in April it just stopped working. Sent it back to get fixed but it was deemed beyond repair and they sent a brand new one and it arrived in June. After a few weeks the new amps' volume would fluctuate after maybe 3-4 hours of playing. Got in touch with the shop I bought it from and described the problem, they said it was most likely the tubes so they sent two new ones. After replacing both tubes the volume still fluctuates after it's been played for a few hours.

Marshall#Emberton#Forest#1005944

Serical No:73400553E 10391 D0231890