Hello,

I just completed a tour and on the last night, mid-set, my Code 50 suddenly turned off and wouldn't turn on again.

Got it home and I still won't turn on. No lights, no nothing.

Anyone else had this problem?

It was totally fine and really sounded great for the whole UK tour and then  the whole Europe tour, apart from the last show.

Any thoughts much appreciated.

Cheers,

Toby (Art Brut)

Hello, I've had my code 50 for about a year and a half. A few months ago I noticed my amp would stop projecting any noise a few seconds after i would turn on the amp, i found it weird because when i play with my headphones plugged in it works fine but when the signal passes through the speaker it stops making any noise, just completely shuts off. 

It isnt the cables or the guitar as I've tried multiple on the same amp, so I imagine it is a problem with the speaker, anything I can do? 

I am considering the purchase of a Marshall CODE 100 combo 2x12 unit.

The primary use would be for practice,

Do any of the existing 100 presets provide straight through clean sound? 

Is it possible to run this unit  so that there is a close match between input and output with no modification?

hi .. anyone can help me to create preset "modern high gain" like jeff loomis,keith merrow sound? is it marshall code can do it???? lets share and learn . thx a lot

Hello,

I purchased CODE 50 and I would like to recording.

I aware ASIO4all is recommended however, youtube (/ or media player in my deskteop computer) is not available during DAW is lauched.

Thus, I am wondering for direct recording without DAW through just audio interface.

       1. I have audio interface with two (2) input manufactured by Kurzweil company.

            Via headphone (line out) of CODE, can I connect this audio interface ? If, so, INPUT connetion or headphone out in Audio interface ?

           No damage to CODE ?  (In internet post, I read CODE probably can be damaged if connected to Audio interface. I am not sure)

Thanks for your advice.

Can the speakers be upgraded on the Code 412 cabinet?  If so, is it something a person can do who’s never changed a speaker before, or would it need professional installation?  

I cannot registered preset . Each time i need to do so by switching on editing button no sound on my code 50 and the amp is blocked. Is it a failure or a bad using. Do i have to return my amp and exchange

Hi, I was just asking myself if I sohuld buy a  Distortion pedal or a overdrive pedal for my Marshall Code 50. 

The amp was not on, nor was it plugged in, so that is good, I'd imagine. Quickly, after the spill, I turned the amp upside down and then proceeded to get the surface liquid off. Should I open it up? Should I simply let it dry next to a heat source?

First pairing is OK but after a restart NEVER the Blue Light goes on and, its clear,  no auto reconnect.What is the Problem?Please Fix It!

I use iphone 6s ,  ipad Air,  Samsung J5 and a old Samsung Node.NO Device works. (Android and iOS)

From my Point of View the Code 25 is the Problem not the Devices, because Bluetooth goes not ON if you turn the Code ON.

Please ask me its a Bug and you can FIX it with a new Bluetoot Version or is a Hardware Problem and you cant fix it.

Many Customers waiting for a Fix over 1 Year!!!!

I have the Code 25 just one Day and update the newest FW via Crome with my Mac.

If you cant fix the Problem i send the Amp back to the Dealer in Germany and get my Money Back.

I have a lot Amps from Marshall (like Slash Sounds) but this is a shame.

I am a beginner and I would like the equalization to sound to audioslave, if possible with the CODE 25. Thanks

Thsi is NOT a question. More of an eye opener, if you do this.        

     Take your PERSONAL cell phone. Pull up GOOGLE  PLAY. Not this site. The actual Google play store. Pull up Marshall gateway.....READ THE REVIEWS......They say it all......Your app, that you designed, SUCKS....I could understand blaming phones if it was maybe 3 or 4 out of 50 reviews. But, that's not the case here. You have 50 bad reviews (1 star) to every 55-70 reviews.....Not good....If you're not going to fix the app......DISCONTINUE THE CODE LINE!!!!!!!!!!!!!!!!

Hi, I bought Major II on Amazon and some users complained that the ones that come in are often not original. So I would like to ask you, if on the basis of these photos we can deduce the originality of the product (with a code on the label). Thank you ;)

https://twitter.com/LocoToretto/status/1114819190567985152

Hello,

A few days ago I bought a Code 25 amp and I really like it but I have some questions about the presets. I connected the amp to my laptop and updated it to the latest firmware and found some presets that I like and want to use on my amp. How do I this? I saved hem go my library but how do I upload them to my amp? Hope to hear from you guys!

Greetings,

Bas

How can i  download the firmware utility. Have a look on the informations code errors.

The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = HomeSite {string}
Property: [NTProductType] = 1 {int}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.1.1 {version}
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Read integer value 1
Setting value '1 {int}' for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Property: [DotNet35SP] = 1 {int}
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet35SP' and value '1': true
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Bypass'
'.NET Framework 3.5 SP1' RunCheck result: No Install Needed
Launching Application.
URLDownloadToCacheFile failed with HRESULT '-2146697208'
Error: An error occurred trying to download 'https://my.marshall.com/downloadfiles/firmware/MarshallFirmwareUpdateUtility.application'.

Hi there,

has anybody a good idea how to get "the" George-Lynch-sound, esp. the sound of the Dokken- or Lynch-Mob-era, with a CODE 50 (or has even a preset programmed already)?

Thx, Mark

I'm noticing a significant volume difference between the presets I have programmed on the footswitch in A2 & A3, is there a way to adjust this so the volume remains the same when switching between A2 & A3 ? 

Most retail outlets have dropped $150 off each of these two products. I bought the Code 100 Head from Guitar Center for $250(They price match).  
The Code 100 Combo is now $299 which is the same price as the Code 50.

I suppose 50s British is VOX AC30.

Does anyone have idea what are the "American" preamps in CODE inspired by?