Please advise where I can download the latest version of the manual for the 25?

Thanks

J

Is there any way to reduce the lag time when switching from one preset to another preset while using the Code footswitch ?. There is about a 1-2 second delayed reaction for the amp to change between presets. We really need a flawless and definatly instant process when switching from a  rhythm crunch to a lead solo or a clean to a lead or any other preset switching.

I've had my CODE since the release days, and haven't really used the speakers at all until now since I lived in an apartment until now, so only used it for recording through the USB port before.

Now that I've been playing it for real for a couple of weeks, I've noticed something worrying. Even at the lowest volume the amp produces a terribly sharp frequency that is seriously hurting my ears. I've tried literally every stock preset and there's no difference, it's completely static. I've tried adjusting the gate,presence and every possible setting without any difference. So I suspect(actually hope) that something is broken and that it's just not the nature/sound of the amp, cause that would not make for a very usable amp. 

I can crank my other amps without this issue, so it's not my ears that are broken. I've been speculating about the speakers being so unused that they need to loose up with time, but that is just wishful thinking perhaps?

I was hoping someone else could relate to this and have experienced the same thing, and possibly a solution?

Thanks in advance.

Promises, promises ... "we'll fix it soon";  " bluetooth issues will be addressed in future firmware updates";  " USB recording issues will be looked into"; AND, a 2-way footswitch will be available for Code 25/50 users when Code 100 is released.  Am I alone in my disappointment for Marshall's seemingly apathetic (non) responses to purchasers of their "not ready for prime time" digital products?!?!?!   I really wanted a Marshall Amp after 45 years as a Fender user.  My mistake.  I should have known better.  Useless, unsupported, glitched, buggy, unreliable, etc., etc., etc.    What say you Marshall in an attempt to save any reputation you thought you had?!?!?!?

Is anyone else unable to save settings on the My Gateway page on this site?

When I change preset positions on that page and hit Save, nothing happens.  You can cancel and the page will reload, but Save does nothing.  I have tried Internet Explorer, Firefox, Safari and Chrome and get the same results.  It hasn't worked for a couple of weeks now, and this is a feature I really used.  I like being able to move a preset's position without overwriting like the app does.

I know that in an electric guitar valve amplifier, the presence adjustment control works and operates within the power amplifier’s negative-feedback loop circuit. However, what I would like to know is: How does the presence adjustment control work and operate in the CODE series amplifiers? Does the presence adjustment control work and operate in the negative-feedback loop in the power amplifier stage of the CODE series amplifiers (after the digital signal is converted back into an analogue signal)? Or does it work and operate as an active equalisation pre-amplifier tone control ― whilst still in the digital domain of the CODE series amplifiers’ digital signal processing (DSP) circuit?

Dear Marshall Team,

I have just recently got my code and thanks for this really nice amp. I got world class sounds for this low price and again.. thanks.

Gateway really makes me much happier and  I plan to bring it up to stage for small ocassion, without footswitch (not available in my country), with the help of gateway and no need to bring those heavy gears. But I realize that I can not switch from one to another setup in a short time while playing.

So in getaway, I would suggest to add one tab showing 4 buttons which is, in individual mode, bassically on off switch for prefx, mod, delay, and power. And other 2 buttons for bank up and bank down. 

So, if we have 100 preset then it can be grouped and stored into 25banks with four variation that can be selected from those 4 buttons.

Just like the layout of multi effect processor.

Emm... need a switch to select individual or bank mode... and square bright yellow and red lamps for each button.

Emm... and display to show the active bank and sub bank... like 24.2 (bank no.24 patch no.2).

Sorry if it sounds like asking too much.

Did I?

Cheers,

Javen

settings-bluetooth-says connected.  Gateway-menu says not connected.  3 hours of chasing this around in a circle.  I'm not impressed.  Some instructions please.

Hello everyone,

I just recently got a nice Code 25. And I am trying to record the sound through USB with Sonar Producer 8 in windows 10 OS. However, Sonar wont recognize Code. There are 3 options for audio devices in Sonar, which is MME, WDM KS and ASIO. When it switched to ASIO, Code is not shown at all, but when switched to either MME or WDM, Sonar tells me  error in the Code USB driver with 2 options, "disabled" or "use anyway". And if I choose use anyway, Code will be shown but can not be selected as input for audio channel.

Checked the support from Sonar, Marshall Code has not  listed in their support/download site.

Here is the address : www.cakewalk.com/support/hardwaresetup.

Anybody has solution for this?

Note : No problem at all for playback from windows to Code. Only problem for recording.

Any help or opinion will be appreciated.

Javen

I've had my Code amp for a couple of weeks and managed to connect it to my iPhone which is running the latest ios 10.2.1.  I also got it to connect to a brand new Samsung Galaxy Tab A running Android 6.0.1.  The connection didn't always work and sometimes dropped out.  I've updated the Amp to the latest firmware to hopefully cure the connection issues and now my phone and tablet just can't detect the amp at all.  I've tried turning on and off, resetting everything, forgetting the device etc. etc. but it's like the amp just doesn't have Bluetooth.  As no device can see the amp then Gateway just isn't possible to use as it also can't detect a phone or tablet. My devices can see each other but it's like the Amp just doesn't have Bluetooth.  I've also tried searching for it with an Ipad but this also couldn't see the Amp ?  It looks like the Bluetooth has died on the Amp but thought I'd ask if anyone has any ideas of anything to try or otherwise I'll have to take it back to the dealer and either try another one or replace it with a Fender Mustang.  It's a good amp but seems to have to many glitches at the moment looking at the forums.  I'll give it one more go though if anyone has any suggestions to try.  Any ideas anyone ? Many thanks for reading.

Thanks for the responses.  I think it is a hardware issue though with the bluetooth just not working on the Amp.  It doesn't seem to matter what device I use the amplifier just isn't visible to anything ?

This really stinks...

I have a brand new Code 25 and it stops playing through the speaker after a few seconds.  The output is always there when I plug in a headset, but the speaker plays for a few seconds then goes quiet.  I redownloaded and installed the firmware.  I tried different settings and different presets.  Nothing works.  Any other advice before i talke it back to the Guitar Center?

I bought a marshall code & the thng just stops working all the time. It does not loose all power, it just looses sound. I have to switch the power on & off for it to work again. Its getting worse & worse. I am about to smash this thing.

Hello!

!!! Ok, my bad. Figured it out. Had to put the amp in pairing more (Rev & Power) - then all is well. Sorry. !!!

(Feel dumb, bt I'll leave this in case someone else has similar issue.)

I had the amp successfully paird with a prior phone (Moto Droid as well - 2 yrs old?) Got a new phone - described above - Android v7. Not able to pair. Have uninstalled the Gateway app, (that got in the way last time, until the phone & amp were paired, then an install / connect went fine). This time... I get a cryptic, possibly IP6 number that looks like a device address. No code to enter, or anything to do. Phone says "Pairing..." waits maybe 10 seconds, then returns with "Pairing..." gone - no message, no nothing. Tried many many times. Cannot "forget the device" - phone doesn't offer a lot of choices: pair or disable Bluetooth is all...

Will the Code work with this phone? IS there a trick I hope I don't know? I sort of like the app - although I often use the knobs - it's just easier... So... I'm not going to hate you forever, but have to join the folks that are dissappointed with this. Amps are marvelous, but this software isn't measuring up I'm afraid.

Anyway, any help much appreciated!

Thanks

Steve

I was wondering if the Code amps were at all compatible with regular pedals and not just the Code footswitch. If anyboy has experience on this, please help or give me some advice.

Thank you.

I've had my Code25 for about 4 months and it worked fine the first 3. Then about a month ago, the preset readout faded to being almost unreadable. Then today, it stopped working completely. I can't use it for my guitar or as a Bluetooth player. Not sure what to do next?

Hi Marshall team,

I successfully connected my code 25 via USB on Windows 8.1 

It's recognized by Windows, you can see it as CODE on device manager. 

My problem is, when loading Cubase 8 AI (I have the latest updated version) you can't select CODE drivers (or as an audio interface) 

Once you are inside Cubase normally if you go to device setup CODE should be there on the list. Since I can't select it as an input source by anyways I can't record anything. 

The process was very smooth with Yamaha thr10 or with some other audio interfaces. 

Can you please help me how to use my CODE as input device, or as an audio interface. (I also have the latest firmware updated)

Thanks. 

I'm the user of CODE25. It's very  useful when playing guitar and recording the simple contents.

It's really almost reproduce the key charactoristics of each amp and cabinet.

By the way,

I want to using it when playing acoustic guitar.

Why don't marshall develop the acoustic amp model for CODE?

Or already they try for Christmas box?

How do I restore my Code amp footswitch to its original settings so I can just scroll through my amps presets?

I'm curious to hear about anybody experimenting with removing the back on their Code to see what it sounds like.

I'm not a big fan of the closed back sound, especially on small combos.  I've noticed my Code vibrates like crazy even on low volumes and I swear I can feel air puffing out of the headphone and/or pedal jacks.  The speaker seems stifled closed inside that little box like it can't move or "breath".  I'm wondering if that is causing the boomy vibrating noises this amp likes to make.

I did find one forum where someone mentioned taking the back off their 50 and they were amazed at how much it opened up the sound and it removed some of the feedback these amps seem prone to.  I'm a little worried about voiding the warranty on the amp, but am real curious about what it would sound like if I made a 1/3 back like a standard combo or something along those lines.

after update de amp make bad sound ....  the sound is broke..