Hola. Puedo enlazar mi celular xiaomi redmi note 4 con el amplificador code50 y reproducir música desde mi celular. Pero no puedo enlazarlo desde la aplicación porque no me muestra ninguna opción del amplificador cuando voy al menú de la aplicación.
Ya borre el caché y también la instalación nuevamente a la aplicación pero tengo el mismo problema.
Hi, I bought Major II on Amazon and some users complained that the ones that come in are often not original. So I would like to ask you, if on the basis of these photos we can deduce the originality of the product (with a code on the label). Thank you ;)
https://twitter.com/LocoToretto/status/1114819190567985152
My DSL40C suddenly began a fading out static when the standby switch is enabled, or disabled. Also the volume knobs don't do anything, anymore. The gain knobs increase the volume, but there is really no gain. These problems began suddenly and together. I have new tubes on order. What is the most likely issue?
Thanks!
Hi! I have an issue while trying to transfer dowloaded presets to my Code25. It occures both usb and bluetooth connections. On a usb connection i click the “amp” icon on a preset, it’s name appears on a Code screen. I push and hold store button on amp, “saved” appears. But then Code becomes freeezed, it does not react on button push etc. when i switch it off and then switch on it works fine, preset available on amp. The same issue appears when i try to transfer presets using Gateway app. What I do wrong?
Hello,
Can someone tell me the difference between Preset(blue) and Library (Gold) on the gateway app. And tap to sync?
before i downloaded the upgrades for my code 50, occaisionally it would go into silent mode when trying to save a preset, but changing the presets name mode was easily gotten to. Now that i have the download the saving/ silent mode bug is gone but it takes forever to get the changing the name mode...it either goes to save or scrolling letters....is there another upgrade for this or is this just a by product of the silent mode fix?
I just registered on here and 1st thing I saw was about firmware updates? Do I need to do this on my new DSL40c?
Hi Marshall,
I purchased this CODE25-E last year 23/SEP/16, but now since this week, the amp is malfunctioning. CODE25-E going silent during playing suddenly and also during the start it's very random. Since the output is same as before so there must be the issue in the electronic circuit.
Please help me to get this replaced ASAP.
Thanks
I have Marshall CODE50 and PEDL-91010 (2-way switch). I have the latest 1.44 firmware update installed, but my pedal does not work properly. For some reason when I press the switch to go down a preset it goes up a preset or just does nothing. Sometimes it works, but that does not happen very often. I've opened the footswitch and the circuit seems too simple to be faulty and by the way my amp acts when I press the down switch it looks like it is the problem with the firmware.
Hey!
I REALLY NEED Slash lead tone preset.
My guitar is Chibson Les Paul with SD SH-2 SLASH SIGNATURE PICKUPS.
Thanks, keep rockin' !
Hi everyone!
im a Marshall code 50 owner.
i was trying to record my guitar via USB using GarageBand, but it was not possible.
I setup the input as Code in GarageBand but doesn't work.
any suggestions? or maybe Code doesnt work with GarageBand?
can you recomend any interface (not an expensive one) to record my guitar?
Hi guys,
I want to exchange valves in my Origin 20h, ordered some from Tube Amp Doctor. After I exchange them do I have to rebias it? Is there a manual for rebiasing? I wasn't able to find anything which would give me even slight bit of a hint about it...
well, it seems quite odd connect the amp with the app.
I'm able to pair my amp correctly and play music through it but it is nearly impossible to connect within the app. I said 'almost' impossible because for a few times it happened.
I can't explain, sometimes the pair/unpair process or the remove/reinstall the app or both, but it's painful and annoying. It isn't properly plug & play.
Also I tried to clear the bluetooth cache, the app cache, disabling wifi .... get out the dog..
Do something, please.
Massimo
Are any of the MG Carbon Fibre Series amplifiers fitted with cooling fans?
I have a Code 100... it has worked great for the last year. The last couple of gigs not so much. When I turn it on...I get no sound. I get sound through the headphone jacks, but nothing through the speakers. Then, out of nowhere it starts working...??
Very frustrating....any input would be great!
I own 4 Marshall Pedals. The bottom plates on all of them is warping up and cracking badly on all of them. What appears to be happening is the rubber bottom is shrinking and making the pressed powdered metal bottoms to crack ad warp. This makes the bottoms open in the center by several milimeters and the pedals no longer sit flat on a surface and in fact rock front to back.
I need to know if I can buy replacement bottoms for them. These arent cheap pedals and I'd like to keep using them. The problem with the rounded bottoms make them highly unstable and even a hazzard. more then once I went to step down on one and the rounded bottoms have caused me to loose my footing and nearly fallen. This can be a lawsuit waiting to happen.
Its OK to make the pedal bodies out of powdered metal. Most manufactures do because its used in injection moulding, but your company is the only one O've seen using it for bottoms. Most manufacturers are wise enough to know you need a steel plate for the bottom. The white metal is not a stable rigid compound and can fracture easily. The rubber bumper is either shrinking on one side or expanding on the other making the plate expand and crack.
This really needs to be addressed by Marshall. It only takes one musician falling because of this manufacturing defect and Marshall will be in a lawsuit.
I simply want to purchase new bottoms. The warping is so bad at this point I cant use the pedals properly. If I remove the screws the bottom plates will simply crumble to bits. These pedals were bought over a series of years from several sources too so its not a batch problem its a manufacturing flaw.
I'm the user of CODE25. It's very useful when playing guitar and recording the simple contents.
It's really almost reproduce the key charactoristics of each amp and cabinet.
By the way,
I want to using it when playing acoustic guitar.
Why don't marshall develop the acoustic amp model for CODE?
Or already they try for Christmas box?
Is it possible to play two different tube amp heads at the same time out of one 1960a cab? Mine has the switch on the back to make the cab run in stereo mode and I was curious if it would be possible to use both inputs for independent heads. Of course the impedance would have to be matched (8 ohm - 8 ohm), but I have no idea if it would handle the amp load properly or not. Trying to find out for sure so I can avoid breaking something if it's not possible.
I upgrade to Android 7.0
Bluetooth is ok (blue light fixed) but impossible to connect Gateway to my Code.
It worked with old Android version.
What can I do?